Mielewczyk Sp. Z O.o.

Koşul: ikinci el, Üretim yılı: 2003, makine/araç numarası: 0281062425, Used Edge Banding Machine General Information: Year of manufacture: 2003 Equipped with a granulate hotmelt adhesive unit Adhesive tank located beneath the glue roller Glue application by roller (synchronous and reverse mode) Features: Automatic edge magazine (for rolls and straight strips) Pressure zone with pneumatically driven main pressure roller and additional rollers for optimal bonding Central adjustment of the upper pressure beam Central manual lubrication of the chain conveyor Control panel at the infeed of the machine Processing Units: End trimming unit (sawing units) for front and rear edge overhang 2 motors, each 0.18 kW Csdpoy Nxgnjfx Almjrb Swivel angle: 0–15° Milling unit (top and bottom) with vertical and horizontal copying Swivel angle: 0–15° 2 motors with changeable knives (straight/radius) Digital counters for quick and precise adjustments Pneumatic adjustment at two points Buffing unit for final finishing Additional Equipment: Extendable support table up to 350 mm Integrated section control (contactless operation) Settings via keyboard and LED display Technical Data: Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Installed power: 4.1 kW Air pressure: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Location: Bulgaria

Koşul: ikinci el, Üretim yılı: 1994, Used machine Year of manufacture: 1994 Crodey Nuhbjpfx Almeb Condition: as-is / was in production until recently Features and technical data: Glue application with glue pot and application roller Pressure unit Cross-cutting unit with linear guides Flush trimming unit with horizontal and vertical sensing with 200 Hz motors swiveling 0 - 30° with radius scraper with buffing unit Edge thickness 0.4 - 5 mm Coil separation 0.8 x 60 or 3 x 30 mm Minimum workpiece width 55 mm Minimum workpiece length 160 mm Workpiece thickness 10 - 55 mm Feed speed 11 m/min Pneumatic connection 6 bar Dimensions 3855 x 1000 x 1610 mm Extraction diameter 100 mm Weight 1000 kg Availability: approx. June 2026 Location: Baden-Württemberg

Koşul: yeni, Üretim yılı: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical data: Edge thickness, coil material: 0.4 – 3 mm (material-dependent) Edge thickness, strip material: 0.4 – 8 mm (material-dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (Limitations may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: • Motorized pressure beam adjustment • Extendable workpiece support XL, 600 mm spacing • 3-color LED entry light • Motorized infeed fence adjustment • Long infeed fence 1252 mm Csdpfx Asy Nuf Tslmsrb • I-Tronic package • Edge Control PPC 322 W control system • IntelliSet: intelligent tool correction • f.a.s.t = fast setting technology • ECO-Mode energy-saving mode • Prepared for RETURN integration (third-party brands) • Guide system BS 501; right-angle infeed of workpieces for edge banding of narrow parts on end faces - Workpiece thickness: min. 10 mm - Workpiece thickness: max. 60 mm - Workpiece length: approx. 140–450 mm • Jointing milling unit FG201 with two milling heads, 64 mm high • Edge feeding MG 301 • Glue application system GluJet GJ 725 NC PUR PRO - Automatic glue height adjustment via dosing sleeve and sensor nozzle to compensate for panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the GluJet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, - allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently from the machine's power supply and automatically compensates any vacuum loss. - Full control of PUR! • Pressure unit DW 301 with motorized NC axis; first roller driven with pneumatic immersion control, two conical pressure rollers • Spray device GM301 after pressure unit with lubricant for high-gloss edges • Pneumatic end trimming unit KA 501 (60 mm) • Extraction hoods for trimming unit • Multi-function milling unit FR301 MOT6 • Shelf program • Contour milling unit FF 301 MOT1 • Scraper unit ZK301 MOT4 including high-gloss package • Surface scraper FK702 • Complete separation and cleaning agent spray unit • Spray device GM 301 after pressure unit (high-gloss edges) • Buffing unit SW 501 Piping above the machine is not included in the scope of delivery Availability: Short notice Stock location: Hochheim

Koşul: mükemmel (kullanılmış), SCM K360 Edge Bander Liquids Pre-milling cutters, Glue application with roller, Interchangeable glue pot Second glue pot included Pneumatic pre-cutting guillotine, Flush-cutting saws, Pneumatically adjustable Top/bottom trimming unit R1-R2, pneumatically adjustable Corner rounding unit, pneumatically adjustable Profile scraper Cleaning liquids Flat scraper, Polishing unit, Max workpiece height: 60 mm Codpfx Ajy Nlgzjlmsrb Max edge band thickness (in roll): 3 mm, Feed speed: 11 m/min Original total running length: 135,000 m Condition: very good Test and inspection on site possible

Koşul: ikinci el, makine/araç numarası: 006216, Takılan kenar türü: ince kenar, kalın kenar, masif ahşap Yapıştırma sistemi: EVA Ek yeri frezelemesi: evet Çok işlevli ünite: evet Crsdpfx Aoy Nk Ahslmob Üst freze ünitesi: evet Maks. ilerleme hızı: 18 m/dak

Koşul: ikinci el, makine/araç numarası: 007176, Uygulanan kenar tipi: ince kenar, güçlü kenar Yapıştırma sistemi: EVA Derz frezeleme: evet Çok fonksiyonlu ünite: evet Yönlendirme birimi: evet Maks. Hareket hızı: 25 m/dak Maksimum panel kalınlığı: 60 mm Çalışma birimleri: 9 nr Crodpfxey Nkvhj Almob

Koşul: ikinci el, makine/araç numarası: 007673, Uygulanan kenar türü: ince kenar, kalın kenar, masif ahşap Yapıştırıcı sistemi: EVA eklem frezeleme: evet Çok işlevli ünite: evet Maksimum ilerleme hızı: 25 m/dak Maksimum sac kalınlığı: 60 mm Codpjy Nkukjfx Almorb Çalışma üniteleri: 8 nr

Koşul: ikinci el, makine/araç numarası: 007981, Takılan kenar tipi: ince kenar, kalın kenar, masif ahşap Yapıştırma sistemi: EVA Birleştirme frezeleme: evet Çok fonksiyonlu ünite: evet Maks. ilerleme hızı: 20 m/dak Csdpfx Aljy Nktyemorb Maksimum plaka kalınlığı: 60 mm Çalışma üniteleri: 7 adet

Koşul: ikinci el, makine/araç numarası: 005321, Takılan kenar tipi: ince kenar, kalın kenar Yapıştırma sistemi: EVA, lazer Birleştirme frezeleme: evet Maks. ilerleme hızı: 35 m/dak Maksimum plaka kalınlığı: 40 mm Crsdpsy Nkrcefx Almob Çalışma üniteleri: 8 adet

Koşul: ikinci el, makine/araç numarası: 006089, Uygulanan kenar tipi: ince kenar, kalın kenar, masif ahşap Yapıştırma sistemi: EVA Birleştirme frezeleme: evet Çok fonksiyonlu ünite: evet Maks. ilerleme hızı: 30 m/dak Maksimum panel kalınlığı: 60 mm Crodpfx Aljy Nknwemsb Çalışma üniteleri: 8 adet

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2001, Fonksiyonellik: tamamen fonksiyonel, güç: 7 kW (9,52 bg), giriş voltajı: 400 V, giriş akımı: 16 A, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, iş parçası yüksekliği (maks.): 50 mm, kenar kalınlığı (maks.): 3 mm, yükseklik ayar tipi: mekanik, Hebrock EURO 2000 Edge Banding Machine – completely overhauled, immediately ready for operation For sale is a highly reliable and robust edge banding machine, manufactured in Germany. The machine has been technically overhauled and is fully operational – ideal for joineries looking for a durable solution without investing in new equipment. Radius and chamfering can be adjusted pneumatically. Csdpoy Nd H Hjfx Almorb The machine can be inspected and tested on site. Condition / Work carried out: - All pneumatic hoses replaced - 2 main cylinders new - Machine thoroughly cleaned - Technically inspected and ready for use Technical Data: - Manufacturer: Hebrock GmbH (Made in Germany) - Model: EURO 2000 - Year of manufacture: 2001 - Voltage: 230 / 400 V - Frequency: 50 Hz - Power output: 7 kW - Current consumption: 13.6 A Working range: - Workpiece thickness: approx. 10–50 mm - Edge thickness: approx. 0.5–3 mm - Minimum workpiece length: approx. 250 mm - Minimum workpiece width: approx. 70 mm - Feed rate: approx. 10 m/min - Compressed air connection required (approx. 6–7 bar) Delivery within a 150 km radius available for an additional charge.

Koşul: iyi (kullanılmış), Kod: 0380 Marka: CASADEI INDUSTRIA Cedpfx Aley Ndymjmorb Model: V 20/10 - CE Standardı Düz panellerde önceden tutkallanmış kenar bantları için otomatik kenar bantlama makinesi - CE Standardı Teknik veriler: Panel ilerletme için otomatik besleyici Ön ve arka kenar için otomatik uç kesme ünitesi Otomatik trimmerlar - Devir hızı 9000 d/dk - Kesici çapı Ø 70 mm Z=4 Panel kalınlığı min/maks mm 10/50 Rulo kenar kalınlığı mm 0,4-2,5 Kenar yüksekliği min/maks mm 12/52 Besleme hızı m/dk 5 Toplam güç 4 kW 2 adet emiş girişi çapı 60 mm Toplam boyutlar: mm 2100 x 700 x 1250 h Ağırlık kg 350

Koşul: ikinci el, makine/araç numarası: 005335, Uygulanan kenar tipi: ince kenar, kalın kenar Yapıştırma sistemi: EVA Birleştirme frezeleme: evet Çok fonksiyonlu ünite: evet Üst freze ünitesi: evet Maksimum levha kalınlığı: 60 mm Çalışma üniteleri: 13 adet Crjdey I Trcopfx Almjb

Koşul: iyi (kullanılmış), Üretim yılı: 2023, Für Anfragen: Zoltán Utasi +36 30 205 7380 • Kantenanleimmaschine für das Umleimen und die Nachbearbeitung von Werkstoffen in Plattenform (wie Spanplatten, MDF-Platten, Tischplatten usw.) • Kantenstärke bei Rollenware: 0,4 - 3 mm • Kantenstärke bei Streifenware: 0,4 - 5 mm Codpfxsy I Sruo Almorb • Kantenhöhe: max. 55 mm • Plattenstärke: 8 - 50 mm • Kantenquerschnitt: max. 5 x 50 mm (materialabhängig) • Werkstückbreite: min. 70 mm • Werkstücklänge: min. 180 /210 mm • Vorschubgeschwindigkeit: 9 m/min • mit manueller Druckbrückenverstellung • Ausziehbare Werkstückauflage, Ausladung 500 mm • Steuerung Edge Control BC 15 mit 15,6" Touchscreen • Vi.se. (VIsual SEtting mode) stellt sämtliche Einstellwerte für digitale Zähler und Druckanzeigen als digitales Logbuch zur schnellen und sicheren Maschineneinrichtung bereit. • Vorfräsaggregat FG101 mit 2 Diamant-Fräsköpfen • Kantenbeschickung MG101 • Glu Jet Hybridtechnologie GJ101 (2,3 kW, 50 Hz): automatische Klebehöheneinstellung (nachlaufende Düse) • Behälter für 1,4 kg Leimpatronen (4 Patronen) • Glu Jet Spülbehälter • Automatische Nachfüllfunktion • Druckaggregat DW101 • Endbesäumaggregat KA101 (50 mm) pneumatischer Eintauchhub, 1 Motor, 0,22 kW, 12.000 U/min • Fräsaggregat FR101: Multifunktionsfräseinheit – bündig, Radius 2 x 0,37 kW, 12.000 U/min 2 x HW-Wechselmesserfräser Ø 75, Z4, R2 • Eckenrundungsaggregat FF101 auf Doppel-Linearführung • Ziehklingenaggregat ZK101 R=2,0 mm • Späneabsaugvorrichtung • Flächenziehklingenaggregat FK101 • Poliereinheit SW101 (2 x 0,13 kW, 1.400 U/min) Zum Reinigen und Polieren der Kanten, mit 2 schwenkbaren Textilscheiben Ø 120 mm, 0 - 5° • Sprühaggregat TR101 für Ein- und Auslaufbereich

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Otomatik Kenar Bantlama Makinesi OCMAC SHF 800 Kullanılmış makine 30 mm kalınlığa kadar masif ahşap kenarlar için ideal 4 zımpara ünitesi ile Makine yapısı: 1. Tutkal hazneli tutkal ünitesi 2. Baskı silindirleri 3. Kenar besleme 4. Çift motorlu uç kesme 5. Çift motorlu düzeltme 6. Çift motorlu kenar düzeltme 7. Mil freze Credpjy I R Izofx Almjb 4 zımpara ünitesi Kabini olan makine Makine uzunluğu yaklaşık 900 cm

Koşul: ikinci el, Üretim yılı: 2019, makine/araç numarası: MR002728, Used: Edge banding machine for the application of edge tape and solid strips up to a thickness of 5mm. Equipped with a combined milling unit for both the longitudinal and end edges. Codey I Rf Hspfx Almerb The machine includes, among others, a pre-milling unit, end trimming units, and an additional glue pot. The machine is fitted with the following options: - Radius scraper unit - Brush unit - Glue scraper unit - Quick-change system for the glue reservoir - Spare glue reservoir Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 3 mm - Maximum strip thickness: 5 mm - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Minimum panel length: 120 mm - Minimum panel width: 110 mm - Exchangeable glue pot: Yes - Feed speed: 7 m/min - Glue reservoir capacity: 0.8 kg - Pre-milling unit present: Yes - Pre-milling tool diameter: 80 mm - Pre-milling tool height: 56 mm - End trimming unit: Carbide-tipped saw blade - End trimming unit saw blade diameter: 125 mm - End trimming unit speed: 12,000 rpm - Radius and straight milling unit: Yes - Milling tool diameter: 58 mm - Milling unit speed: 12,000 rpm - Radius scraper unit: Yes - Glue scraper unit: Yes - Anti-adhesion spray unit: Yes - Brush unit: Yes - Cleaning spray unit: Yes - Serial number: KK00006654

Koşul: mükemmel (kullanılmış), Üretim yılı: 2021, Fonksiyonellik: tamamen fonksiyonel, Ayrıstırıcı uygulama cihazı Crodpsy I Dnuofx Almeb Taşlama grubu Yapıştırma sistemi Kenar baskı grubu Uç kesme grubu Radyus freze grubu Yuvarlatma grubu Kenar kazıyıcı grubu Tutkal kazıyıcı grubu Fırça grubu Barkod okuyucu Ağırlık yaklaşık 1600 Kg. Hemen teslim edilebilir

Koşul: ikinci el, Üretim yılı: 2008, makine/araç numarası: 0-261-06-5499, Fonksiyonellik: tamamen fonksiyonel, iş parçası yüksekliği (maks.): 42 mm, kenar kalınlığı (maks.): 8 mm, yükseklik ayar tipi: mekanik, tahrik tipi: elektrikli, toplam yükseklik: 1.600 mm, toplam uzunluk: 4.800 mm, toplam genişlik: 800 mm, son revizyon yılı: 2026, Kenar bantlama makinesi, yeni PU sistemine geçiş nedeniyle satılmaktadır. Bakımları düzenli olarak yapılmıştır, sorunsuz çalışmaktadır. İki adet ekstra ekleme kafası dahildir. Toz emiş boru hattı dahildir. Halen kullanılmaktadır, istenirse yerinde görülebilir ve test edilebilir. Crjdey I Apkspfx Almjb

Koşul: yeni gibi (sergi parçası), Üretim yılı: 2024, Fonksiyonellik: tamamen fonksiyonel, Donanım: CE işareti, dokümantasyon / kılavuz, Automatyczna okleiniarka EVA z podajnikiem łańcuchowym, garnkiem klejowym, jednostkami wstępnego frezowania oraz zaokrąglania narożników. Dane techniczne i opcje: • Prędkość posuwu: 9 m/min • Dopuszczalna grubość płyty: 8 – 50 mm • Dopuszczalna grubość obrzeża w rolkach lub paskach: 0,4 – 3 mm • Dopuszczalna grubość obrzeża w paskach (ręczne podawanie): maks. 5 mm • Maksymalna średnica rolki obrzeża: 800 mm • Minimalna długość płyty: 110 mm • Minimalna długość płyty dla jednostki tnącej VR1/VS1: – Przy wysokości elementu h=18 mm: 180 mm – Przy wysokości elementu h=50 mm: 210 mm • Minimalna szerokość płyty: 70 mm Wyposażenie maszyny: • Pas transportowy z blokami gumowymi • Belka dociskowa z rolkami gumowymi na łożyskach • Automatyczny podajnik obrzeża • Rolki dociskowe • Wysuwane podparcie zapewniające bezpieczne odkładanie dużych elementów • Panel sterowania dotykowego • Automatyczny system natrysku środka antyadhezyjnego (ułatwia czyszczenie elementów z kleju i zmniejsza prawdopodobieństwo powstawania nadmiaru kleju) Codoy Izktopfx Almerb • System szybkiej wymiany garnka klejowego FLEX • Oświetlenie LED wewnątrz maszyny • Certyfikat CE

Koşul: yeni, Üretim yılı: 2026, Hebrock - Altendorf Edge Banding Machine F5 next - New machine, still in original packaging with complete equipment - With PLC control, including 15" touchscreen - Edging material up to 3 mm - Whispercut jointing unit including DIA tool up to 2 mm - Coated, maintenance-free glue pot, PU quick-change pot Csdpfxoy Iw Nrs Almerb - Incl. adhesive discharge device directed downwards - HF milling station with pneumatic milling adjustment - Corner rounding unit - Radius scraper - Surface scraper including pneumatic lifting device - Cleaning station - Combination milling head - Radius milling cutter R=2mm - Radius corner milling cutter R=2mm - Quick-change setup for corner milling cutter - Additional exchange motor for corner milling with tool set - Radius exchange motor R=1mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 - Chassis - Additional exchangeable glue pot incl. holder - Spray device for separating agent PUR - Spray device for cleaning agent PUR - Spray device for edge PUR/foil - Nesting feature for milling and radius scraper - Pneumatic 3-point adjustment (for radius, bevel, and flush milling) - Jointing up to 50 mm workpiece thickness - LED lighting in working area - Workpiece thickness 8-50 mm - Minimum workpiece length approx. 160 mm - Feed speed approx. 10 m/min - Dimensions LxWxH 4.40 x 1.10 x 1.55 m - Weight: gross: 990 kg, net: 930 kg - Extraction port 1 x 140 mm Delivery and commissioning possible

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, kenar kalınlığı (maks.): 3 mm, Gebrauchte einseitige automatische Kantenanleimmaschine Die SCM Olimpic K208 ist eine zuverlässige, industrietaugliche automatische Kantenanleimmaschine, die für präzise und kontinuierliche Kantenbearbeitung von Möbelplatten und anderen Holzwerkstoffplatten entwickelt wurde. Sie eignet sich für die Verarbeitung von Melamin, PVC, Furnier und Rollenmaterial und ist damit eine ausgezeichnete Wahl für Tischlereien, Möbelhersteller und kleine Fertigungslinien. Hauptmerkmale Typ: Einseitige automatische Kantenanleimmaschine Hersteller: SCM Group, Italien Modell: Olimpic K208 Einsatzbereich: Kantenanleimen von Möbelplatten und Holzwerkstoffplatten Verarbeitbare Kantenmaterialien: Melamin, PVC, Furnier, Rollenmaterial Technische Daten Plattendicke: 10–55 mm Plattendicke mit Profilaggregat: 10–45 mm Kantenbanddicke: ca. 0,4–10 mm Mindestlänge des Werkstücks: 140 mm Vorschubgeschwindigkeit: ca. 11 m/min Mindestbreite des Werkstücks: abhängig von der Konfiguration ca. 100–130 mm (teilweise auch ab 65 mm) Serienausstattung Leimaggregat Crsdpfx Aljy Iwu Usmjb Vorschneideaggregat (vorne und hinten) Oben- und unten-Besäum-/Fräsaggregat Eckenrundungsaggregat (bei bestimmten Ausführungen) Ziehklingen- und Polieraggregat Oberer Andruckbalken Kettenvorschubsystem Die SCM Olimpic K208 bietet eine kompakte und dennoch effiziente Lösung für Kantenbearbeitungen. Dank stabiler Bauweise, kontinuierlichem Vorschubsystem und der bekannten Zuverlässigkeit von SCM-Maschinen ist sie ideal für den täglichen industriellen Einsatz – insbesondere in der plattenbasierten Möbelproduktion.

Koşul: ikinci el, Üretim yılı: 2006, Fonksiyonellik: tamamen fonksiyonel, çalışma saatleri: 0 h, giriş voltajı: 380 V, toplam yükseklik: 1.700 mm, toplam uzunluk: 5.700 mm, toplam genişlik: 1.150 mm, toplam ağırlık: 1.500 kg, We are offering this fully operational HOLZ-HER SPRINT 1312 edge banding machine, year of manufacture 2026. Model: 1312 Equipment number: 1337/0-506 Serial number: 5002547 The machine will remain in use until mid-May and will then be replaced by a new one. The machine can be tested at any time, even though it is located in an outbuilding. Loading with a forklift is possible without any issues. Self-collection only. If you have any questions or need further information, please feel free to send us a message or call us. Crsdpfey Ir Ayjx Almeb

Koşul: ikinci el, makine/araç numarası: 008587, Uygulanan kenar tipi: ince kenar, kalın kenar, masif ahşap, kaplama Yapıştırma sistemi: EVA, PUR Cjdpey In Dgsfx Almsrb Birleştirme frezeleme: evet Çok fonksiyonlu ünite: evet Üst freze ünitesi: evet Maks. ilerleme hızı: 25 m/dak Maksimum plaka kalınlığı: 60 mm Çalışma üniteleri: 8 adet

Koşul: ikinci el, makine/araç numarası: 008586, Uygulanan kenar tipi: ince kenar, kalın kenar, masif ahşap, kaplama Yapıştırma sistemi: EVA, PUR Birleştirme frezeleme: evet Çok fonksiyonlu ünite: evet Credpfjy In A Nox Almob Üst freze ünitesi: evet Maks. ilerleme hızı: 25 m/dak Maksimum plaka kalınlığı: 60 mm Çalışma üniteleri: 8 adet

Koşul: ikinci el, makine/araç numarası: 008585, Uygulanan kenar tipi: ince kenar, kalın kenar, masif ahşap, kaplama Yapıştırma sistemi: EVA, PUR Birleştirme frezeleme: evet Çok fonksiyonlu ünite: evet Üst freze ünitesi: evet Maks. ilerleme hızı: 25 m/dak Crodpfxey In A Aj Almob Maksimum plaka kalınlığı: 60 mm Çalışma üniteleri: 8 adet