Sarkaç darbe test cihazı 5,5 J

Zwick Roell HIT5.5P

Durumu: mükemmel (kullanılmış), Üretim yılı: 2019, Fonksiyonellik: tamamen fonksiyonel, Zwick Roell Pendulum Impact Tester HIT5P Plus incl. TestXpert III Software and 2 Charpy Pendulums Year of manufacture: 2019 Dossier number: DO733812 Protective guard, fixed left side • 010924 TestXpert III Software TestXpert III Base Program 1035123 TestXpert III Standard Test Program 1035790 Manual Charpy Pendulum 1J BPI-ACPECHI.112 Charpy Pendulum 5J BPI-ACPECHI.115 Testing in accordance with Charpy ISO 179-1:2000 + Amend. 1:2005, German Version EN ISO 179-1:2000 + A1_2005 Dimensions: 680 x 658 x 404 mm (without guard) Maximum capacity: 5 J Dimensions (W x H x D): 680 x 658 x 404 mm (without guard) Weight (without fixtures): approx. 75 kg Electrical connection: 100 to 240 V, 50/60 Hz, 70 W Interfaces: RS232, USB Angular resolution: 0.018° Test results (numeric): Impact energy [%] Impact energy [J; ft lbf] Impact toughness [kJ/m²] Control function: pendulum vertical position Oscillation duration Friction correction function Impact tensile test: Air and bearing friction, kinetic yoke energy 3.1 Tests according to Charpy The Charpy supports are made of solid cast base bodies. Test-specific components, such as anvils and supports, are selected according to the specimen requirement. The supports, which can have a significant effect on measurement results due to their surface finish and radius, are manufactured entirely by precision CNC and 100% inspected. ZwickRoell does not offer one-piece supports, as tight tolerances are difficult to achieve. The correct spatial positioning of the supports in relation to the pendulum fin is ensured using an optional gauge during installation. Supports are subject to more wear than anvils; two-part supports can be replaced independently of other accessories at low cost. Quick-change adapter plates are used to adjust the impact point to the specimen width (in the direction of impact). Adaptation to specimen thickness (vertical direction) is achieved by means of appropriately dimensioned anvils, which are precisely inserted with locating pins. Optional accessories for the impact frame include a swivel-mounted protective screen and alignment units, which position the specimen at the center of impact either at the notch or at one end face. Advantages: • Fast changeover of support blocks Dedpfjw H Andex Abpoku • Precision manufacturing and documented 100% dimensional accuracy inspection of supports