HC 50 (HPK 50)

Bramidan (Presto) Ballenpresse 50 t

Technical Data – Baler:

Manufacturer as per nameplate: BRAMIDAN (original manufacturer Presto GmbH & Co. KG)
Model: HC 50 (equivalent to Presto HPK 50)
Year of manufacture: 2007
Operating hours: 13,209 hours (as of March)
Number of bales produced: 23,379 units
Pressing force: 50 t
Specific pressing force: 650 kN/m²
Feed opening dimensions: 1,250 x 1,050 mm (L x W)
Filling volume: 0.96 m³
Theoretical cycle time: 32 seconds
Theoretical output: 108 m³/hour
Bale dimensions: 1,100 x 700 mm (W x H), length variable
Drive power: 15 kW
Total power consumption: 50 A
Tying: 4-fold vertical, fully automatic
Throughput with bulk density of 30 kg/m³: approx. 3.1 t/hour
Bulk density of 60 kg/m³: approx. 4.5 t/hour
Bulk density of 100 kg/m³: approx. 7.2 t/hour
Bale weight at approx. 1.2 m bale length: up to 500 kg, depending on material
Hydraulic oil tank capacity: 400 L
PLC controller: Siemens S7-200
Effective transport dimensions (excluding baler): 6,780 x 1,800 x 2,100 mm (L x W x H)
Transport weight (baler): 8.5 t

Condition of the Baler:
The baler was used in a production facility exclusively for compacting cardboard and was regularly maintained. With just 13,209 operating hours, the machine has seen relatively low usage. The baler has been partially refurbished and thoroughly tested in our workshop.

The following refurbishment work was carried out:
- Machine cleaned
- Bale retaining mechanism serviced and lubricated
- Light barrier replaced
- Twisting unit fully disassembled, all bearings and plastic gliders replaced, lubricated, and chain tension adjusted
- Knives and counter-knives dismantled, sharpened, and reinstalled
- Knife clearance newly adjusted
- General maintenance performed and machine lubricated

Scope of Delivery:
- 1 baling press with wire spool boxes (without wire)
- 1 set of machine documentation
Dedpfx Ajw U Dt Noagjur

Notes:
The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection is possible by appointment. We assume no liability for technical data or possible errors.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.