Balya makinesi

Paal DOKON 500 H/S

Durumu: işlem için hazır (kullanılmış), HSM V-Press 860 baler, year 2008-2009, price: 5,800 EUR - Pressing force: 54 kN - Specific pressure: 63.46 N/cm² - Drive power: 7.5 kW - Cycle time: 25 s - Loading height: 1110 mm - Feed opening (W x H): 1195 x 650 mm - Bale dimensions (L x W x H): 1200 x 780 x 1200 mm - Bale weight: 480 kg - Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm - Machine weight: 2008 kg - Binding material: wire - Pressed materials: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus baler, year 2013-2015, price: 7,500 EUR HSM V-Press 860 L baler, year 2015, price: 9,000 EUR HSM V-Press 860 plus baler, year 2019, price: 9,000 EUR Dcsdpjra Rbgofx Adtod HSM V-Press 860 plus baler, year 2024, price: 10,000 EUR HSM V-Press 860 new/ex-demonstration, year 2020, price: 13,000 EUR 4-fold bale wire binding Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data: - Dimensions (L x W x H, mm): 1213 x 1824 x 2987 - Feed opening (mm): 1200 x 565 - Cycle time (s): 35 - Pressing force: 54 t - Power supply: 400 V (three-phase) HSM V-Press 860 plus B baler, year 2020, price: 14,000 EUR - Pressing force: 594 kN - Voltage/Frequency: 400 V/50 Hz - Motor power: 4 kW - Feed opening (W x H): 1500 x 651 mm - Bale dimensions (L x W x H): 1500 x 780 x 1200 mm - Bale weight: 550 kg - Loading type: manual - Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm - Machine weight: 2336 kg - Binding material: wire - Material to be pressed: film, cardboard - Idle cycle time: 25 s

Durumu: mükemmel (kullanılmış), Üretim yılı: 1998, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 25 t, dolum açıklığı genişliği: 800 mm, dolum ağzı uzunluğu: 1.050 mm, balya genişliği: 900 mm, balya yüksekliği: 800 mm, giriş voltajı: 400 V, gürültü seviyesi: 85 dB, güç: 18,5 kW (25,15 bg), hacim debisi: 160 m³/saat, Bollegraaf HBK25 offered in Cyprus. The machine is in good condition and includes a floor-mounted conveyor belt. The unit is immediately available. Technical specifications baler: Drive: 18.5 kW Bale dimensions: 800 x 900 mm, adjustable Hopper dimensions: 1,050 x 800 mm Press force: 25 tons Capacity: 160 m³/hour (depending on material) Technical specifications conveyor belt (estimated): Length on floor: 3,000 mm Diagonal length: 5,000 mm Dedpfxexbdguo Adtocd

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2007, çalışma saatleri: 13.209 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 50 t, dolum açıklığı genişliği: 1.050 mm, dolum ağzı uzunluğu: 1.250 mm, balya genişliği: 1.100 mm, balya yüksekliği: 700 mm, balyanın ağırlığı: 500 kg, yağ tankı kapasitesi: 400 l, son revizyon yılı: 2025, hacim debisi: 108 m³/saat, Technical Data – Baler: Manufacturer as per nameplate: BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March) Number of bales produced: 23,379 units Pressing force: 50 t Specific pressing force: 650 kN/m² Feed opening dimensions: 1,250 x 1,050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical output: 108 m³/hour Bale dimensions: 1,100 x 700 mm (W x H), length variable Drive power: 15 kW Total power consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput with bulk density of 30 kg/m³: approx. 3.1 t/hour Bulk density of 60 kg/m³: approx. 4.5 t/hour Bulk density of 100 kg/m³: approx. 7.2 t/hour Bale weight at approx. 1.2 m bale length: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 L PLC controller: Siemens S7-200 Effective transport dimensions (excluding baler): 6,780 x 1,800 x 2,100 mm (L x W x H) Transport weight (baler): 8.5 t Condition of the Baler: The baler was used in a production facility exclusively for compacting cardboard and was regularly maintained. With just 13,209 operating hours, the machine has seen relatively low usage. The baler has been partially refurbished and thoroughly tested in our workshop. The following refurbishment work was carried out: - Machine cleaned - Bale retaining mechanism serviced and lubricated - Light barrier replaced - Twisting unit fully disassembled, all bearings and plastic gliders replaced, lubricated, and chain tension adjusted - Knives and counter-knives dismantled, sharpened, and reinstalled - Knife clearance newly adjusted - General maintenance performed and machine lubricated Dcodpfow U Dt Nox Adted Scope of Delivery: - 1 baling press with wire spool boxes (without wire) - 1 set of machine documentation Notes: The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection is possible by appointment. We assume no liability for technical data or possible errors.

Durumu: mükemmel (kullanılmış), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dcsdev Al Tiopfx Adtjd Dimensions L x W x H (mm): 1780x1150x2985 Power (kW): 4 kW Weight (kg): 2300 Year of manufacture: 2018-2019

Durumu: iyi (kullanılmış), Üretim yılı: 2000, çalışma saatleri: 28.155 h, Fonksiyonellik: tamamen fonksiyonel, Bale Press Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Manufacturer: Paal Dsdpex Tflfofx Adtjcd Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput rate at 35 kg/m³: approx. 9.5 t/h 60 kg/m³: approx. 16.5 t/h 100 kg/m³: approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer’s specifications. We do not accept any liability for the information provided or for any potential errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Viewing by appointment only. Sale is made against advance payment, ex works, without warranty or guarantee.

Durumu: iyi (kullanılmış), Üretim yılı: 2016, çalışma saatleri: 47.624 h, Recently arrived, more pictures and a video to follow. Baler Avermann, Model AVOS 1410 BR5 – 45/80, Press force 80 t, Year of manufacture 2016 Technical data: Manufacturer: Avermann Maschinenfabrik Model: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Press force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Dcodpox Uzy Ujfx Adtjd Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying method: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (L x W x H) Machine weight: approx. 18,000 kg Remarks: The baler was dismantled from ongoing operation. A matching WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Additional photos available upon request. Please feel free to contact us. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the stated data or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by prior appointment. Sale is ex-works, payment in advance, without warranty or guarantee.