Şekillendirme makinesi - Dikey

CAMS 250 2ACT

Space requirement approx. 1450 x 1560 x 2620 mm
Machine weight approx. 1.8 t
The machine base is a heavy-duty welded construction.
The coolant oil tank is integrated into the machine bed.
The cross-table is made of cast iron; the guideways are ground and scraped with adjustable gibs.
The ram is also made of cast iron, with ground and scraped guides, equipped with lubrication grooves. The ram can be swiveled +/- 20 degrees. Stroke adjustment is possible via a side access opening. The tool is positioned using the longitudinal stop. The machine features a mechanical stroke drive.

The CNC indexing device control is housed in the control console. The zero point can be set in any desired position of the indexing device, and it offers symmetric indexing from 2-999 divisions and asymmetric indexing up to 99 divisions.
Machine color: Green
Indexing device color: Red

--> Technical Data
- Adjustable ram stroke from 0 to: 250 mm (No. 1)
- Distance column/toolholder: 425 mm (No. 2)
Fsdpfx Acewbi Awj Hjpn
- Distance table surface/head: 430 mm (No. 3)
- Vertical ram adjustment: 430 mm (No. 5)
- Rotary table diameter (NC on axis A): 450 mm (No. 6)
- Longitudinal table travel (NC on Y-axis): 250 mm (No. 8)
- Cross table travel (NC on X-axis): 220 mm (No. 9)
- Bore in the table center: 135 mm (No. 10)
- Stepless adjustable ram strokes per minute: 22–90 strokes/min
- Ram motor power (automatic brake, asynchronous): 3 kW
- Dimensions (ram fully extended, LxWxH): 1450 x 1560 x 2620 mm

--> Digital operating manual available in German & English

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.