Endüstriyel yörüngesel perçinleme makinesi

CHIRON Werke GmbH Tuttlingen (Made in West Germany)

Type/Model: 307-153/714-750

Serial No.: 82/293

Country of Manufacture: Made in West Germany (pre-1990)

Folhcdwjw T U Ubo Iegc
Technical Data (approximate, for CHIRON machines of the 1970s/80s):

Machine Type: Pillar drill / single-station drilling machine for metal

Motor Power: typically 1.5 kW to 3 kW (three-phase, 380 V)

Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switchable)

Max. drilling diameter in steel: approx. 20–25 mm (depending on version)

Spindle taper: most commonly MT2 or MT3

Feed: manual or mechanical (some models feature automatic feed)

Weight: several hundred kilograms (approx. 300–600 kg)

Intended Use: serial production in industry (precision hole drilling, light milling in metals, integration in production lines)

Work table: cast iron, with clamping capability for workpieces

Full control panel – adjustable speed settings

2. Key head parameters (critical for riveting):

Press force (kN) – if specified on the cylinder plate or control box (often 10–30 kN for this size)

Spindle/slide stroke (mm) – measure from uppermost to lowest position

"Daylight" (working height: distance from tool tip to table at top position)

Throat depth – from spindle centerline to column (working reach)

Max. rivet diameter / operating range – specify based on testing or previous use

Voltage: usually 380/400 V, 50 Hz

3. Dimensions and logistics:

L×W×H (base/overall) (cm)

Power supply: 3×400 V, protection e.g. C16–C20 (specify according to power rating)

Weight (weigh with a pallet truck with scales, or provide an estimate)

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.