Sıcak hava fırınıCompactsystem
MARTINA 55
Sıcak hava fırını
Compactsystem
MARTINA 55
sabit fiyat KDV hariç
€4.300
Üretim yılı
2025
Durumu
Yeni
Konum
Leipzig 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine tanımı:
- Sıcak hava fırını
- Makine üreticisi:
- Compactsystem
- Model:
- MARTINA 55
- Üretim yılı:
- 2025
- Durumu:
- yeni
Fiyat ve Konum
sabit fiyat KDV hariç
€4.300
- Konum:
- Leipzig

Ara
Teklif detayları
- Listeleme kimliği:
- A185-39961
- Referans no.:
- 1327-10327
- Son güncelleme tarihi:
- 15.12.2025
Açıklama
Dimensions (L/W/H): 720 x 1000 x 1900 mm
Weight: 300 kg
Total power requirement: 1.2 kW
Warm air furnace MARTINA 55
The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities.
Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV).
- Fully automatic and continuous air operation
- Thermal output: 49.9 kW
- Thermal output (kcal): 43,000
- Fuel consumption: 15 kg/h
- Airflow: 4,900 m³/h
- Combustion chamber depth: 650 mm
- Insertion door: 370 x 350 mm
- Warm air blower: 1.12 kW / 230 V
- Fire chamber negative pressure: 0.2–0.3 mbar
- Flue draft, rated output: 0.18 mbar
Ijdpjvz Hq Hofx Ag Nstb
- Heatable room volume: approx. 1,000 m³
- Heatable area: approx. 220 m²
- Footprint: width 720 mm, depth 1000 mm, height 1900 mm
- Weight: 300 kg
- Flue pipe diameter (connector): 160 mm
- Chimney diameter (reference): 200 mm
- Efficiency: 85–90%
- Chimney draft pressure: 13 PA
- Flue gas temperature: 290°C
- Warm air outlet connectors: 2 x Ø 200 mm
- For further technical details, please refer to the attached data sheet.
The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Weight: 300 kg
Total power requirement: 1.2 kW
Warm air furnace MARTINA 55
The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities.
Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV).
- Fully automatic and continuous air operation
- Thermal output: 49.9 kW
- Thermal output (kcal): 43,000
- Fuel consumption: 15 kg/h
- Airflow: 4,900 m³/h
- Combustion chamber depth: 650 mm
- Insertion door: 370 x 350 mm
- Warm air blower: 1.12 kW / 230 V
- Fire chamber negative pressure: 0.2–0.3 mbar
- Flue draft, rated output: 0.18 mbar
Ijdpjvz Hq Hofx Ag Nstb
- Heatable room volume: approx. 1,000 m³
- Heatable area: approx. 220 m²
- Footprint: width 720 mm, depth 1000 mm, height 1900 mm
- Weight: 300 kg
- Flue pipe diameter (connector): 160 mm
- Chimney diameter (reference): 200 mm
- Efficiency: 85–90%
- Chimney draft pressure: 13 PA
- Flue gas temperature: 290°C
- Warm air outlet connectors: 2 x Ø 200 mm
- For further technical details, please refer to the attached data sheet.
The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2003
İstek gönder
Telefon & Faks
+49 341 9... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu













