Kurutuculu vidalı kompresör + 270 lt tank

CORMAK LUFT 700 VSD+PM COMPACT/ 270l tank

CORMAK LUFT 700 VSD+PM Compact Rotary Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER

SET INCLUDES:

- LUFT 700 VSD+PM COMPACT rotary screw compressor with integrated dryer.
- 270 L horizontal compressed air receiver.

Key features that distinguish these models:

1. Permanent Magnet Motor Technology (PM)

Most compressors in the Energy Saver series use Permanent Magnet motors. Unlike standard induction motors:
- They achieve efficiency in line with IE4 or even IE5 standards.
- They maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range).
- They are smaller, lighter, and generate less heat.

2. Advanced Inverter Control (VSD)

At the core of the Energy Saver line is a variable-frequency drive (inverter).
- Demand-based operation: The compressor does not operate on an “all-or-nothing” (load/unload) principle. If your machine requires only 30% of output, the compressor will reduce its speed, proportionally lowering energy consumption.
- Idle time elimination: Classic compressors often continue running for several minutes after the tank is full, drawing about 25–30% of nominal power without producing air. Energy Saver models virtually eliminate this wasteful process.

3. Soft Start

Thanks to the inverter, these units start smoothly at 0 Hz. This means no abrupt current spikes during start-up, which:
- Protects your facility’s electrical installation.
- Allows for frequent start-stops without risk of winding overheating.

4. Real Energy Savings

In practice, using the Energy Saver line enables a reduction in electricity bills by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable network pressure (with an accuracy of 0.1 bar), which is crucial for precision equipment such as laser cutters. Extended lifetime: The absence of sudden pressure and temperature spikes increases the working life of the screw element.

Technical Specifications
Motor power: 5.5 kW / 7.5 HP
Voltage: 400V/50Hz
Capacity at 0-6 bar: approx. 690 L/min
Capacity at 6 bar: 690 L/min
Capacity at 8 bar: 650 L/min
Capacity at 10 bar: 650 L/min
Discharge connection diameter (G): 1/2"
Kwjdpfxoycg I Ss Acust
Dimensions: 1495 x 520 x 1340 mm
Weight: 250 kg

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.