Freze makinesi

DECKEL FP 2 Aktiv mit neuer Elektrik

Durum: yenilenmiş (kullanılmış), Üretim yılı: 2000, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Bwedpfx Ajzb U Epehhjp Maximum diameter above cross slide: 160 mm Centre height above slide: 83 mm Maximum diameter above bed: 430 mm Turning length (depending on equipment): 630 mm Headstocks: Standardised spindle nose for use with various collets and chucks via appropriate adapters. Collet equipment SCHAUBLIN: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Automatic chuck, standard diameter: 210 mm Direct drive via AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm Maximum spindle speed: 4,000 rpm Spindle positioning, increment: 0.1° C Axis: Programmable increment: 0.001° Spindle lock: 80 Nm Pneumatic clamping cylinder: 3,400 daN Cross Slide: Transversal travel, X-axis: 230 mm Resolution in radius: 0.0005 mm Control via AC motor, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Control via AC motor, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Stepless working feeds, X/Z axes: 0–5,000 mm/min Rapid traverse, X/Z axes: 8/10 m/min Feed force, X/Z axes: 420 / 670 daN Turret Tool System: Number of tool stations: 12 Number of driven tool stations: 6 Driven by AC motor, intermittent duty power: 3.7 kW Max. intermittent torque: 36 Nm Max. drive speed: 5,000 rpm Standard tool holder mounting: VDI 30 Max. turning tool section: 20 x 20 mm Integrated coolant Bi-directional indexing Coolant System: Tank capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: - 1 Fanuc 18i control unit - 1 A2-6 spindle headstock - 1 12-position VDI 30 turret for 6 live tools - 1 pneumatically controlled tailstock 180-65.200 - 1 SCHUNK Rota-s 200-52 A2-6” 3-jaw chuck - 1 Brucker CM5 revolving live centre - 1 ESX-25 radial drilling-milling head, max speed 5,000 rpm, without EX nut ref 4100.00552 - 1 ESX-25 axial drilling-milling head, max speed 5,000 rpm, without EX nut ref 4100.00550 - 1 KENNAMETAL ESX-25 without EX nut - 1 EWS ESX-25 without EX nut - 4 left-hand short radial tool holders, Form B2, ref 4100.0100 - 1 ESX-25 collet holder, Form E3 with EX25 nut and 5 mm collet - 1 same, without EX25 nut - 3 tapping collets, diam. 4.5 – 6 and 8 mm - 1 indexable insert drill holder, bore Ø 40 mm, Form E1 ref 4100.00124 - 1 same, bore Ø 32 mm ref 4100.00107 - 1 same, bore Ø 20 mm ref 4100.00105 - 1 boring bar holder Ø 8 mm, Form E2 ref 4100.00108 - 1 same, Ø 10 mm ref 4100.0109 - 1 same, Ø 12 mm ref 4100.0110 - 2 same, Ø 16 mm ref 4100.0111 - 1 same, Ø 20 mm ref 4100.0112 - 1 same, Ø 25 mm ref 4100.0113 - 1 same, Ø 32 mm ref 4100.0115 - 1 GARANT long Ø 32 mm - 5 steel protection plugs, Form Z2 ref 4100.00130 - 1 left-hand axial tool holder Force C4 ref 4100.00103 - 1 pneumatically controlled tailstock CM 5 ref 180-65.200 - 1 standalone support for microscope ref 180-60.005 - 1 coolant system OPTION 1 hinged steady rest, 3 jaws, for Ø 30 – 120 mm ref 180-70.200, CHF 2,500.-- + VAT Subject to error or omission, the technical data is provided without obligation.