Hassas torna tezgahı

Schaublin 180-CCN R-TM

TECHNICAL SPECIFICATIONS

Capacities:
Maximum turning diameter: 270 mm
Maximum diameter above cross slide: 160 mm
Centre height above slide: 83 mm
Maximum diameter above bed: 430 mm
Turning length (depending on equipment): 630 mm

Headstocks:
Standardised spindle nose for use with various collets and chucks via appropriate adapters.
Collet equipment SCHAUBLIN: B45/F66
Maximum bar capacity, diameter: 36 mm / 60 mm
Automatic chuck, standard diameter: 210 mm
Direct drive via AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW
Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm
Maximum spindle speed: 4,000 rpm
Spindle positioning, increment: 0.1°

C Axis:
Programmable increment: 0.001°
Spindle lock: 80 Nm
Pneumatic clamping cylinder: 3,400 daN

Cross Slide:
Transversal travel, X-axis: 230 mm
Resolution in radius: 0.0005 mm
Control via AC motor, nominal torque: 3 Nm
Ball screw, diameter x pitch: 32 x 5 mm
Longitudinal travel, Z-axis: 720 mm
Resolution: 0.001 mm
Control via AC motor, nominal torque: 6 Nm
Ball screw, diameter x pitch: 32 x 10 mm

Feeds:
Stepless working feeds, X/Z axes: 0–5,000 mm/min
Rapid traverse, X/Z axes: 8/10 m/min
Feed force, X/Z axes: 420 / 670 daN

Turret Tool System:
Number of tool stations: 12
Number of driven tool stations: 6
Driven by AC motor, intermittent duty power: 3.7 kW
Max. intermittent torque: 36 Nm
Rsdpfx Aqezb U Epoqjch
Max. drive speed: 5,000 rpm
Standard tool holder mounting: VDI 30
Max. turning tool section: 20 x 20 mm
Integrated coolant
Bi-directional indexing

Coolant System:
Tank capacity: 120 litres
Pump flow rate: 10 l/min
Pressure: 5 bar

Inventory 2230043 includes:

- 1 Fanuc 18i control unit
- 1 A2-6 spindle headstock
- 1 12-position VDI 30 turret for 6 live tools
- 1 pneumatically controlled tailstock 180-65.200
- 1 SCHUNK Rota-s 200-52 A2-6” 3-jaw chuck
- 1 Brucker CM5 revolving live centre
- 1 ESX-25 radial drilling-milling head, max speed 5,000 rpm, without EX nut ref 4100.00552
- 1 ESX-25 axial drilling-milling head, max speed 5,000 rpm, without EX nut ref 4100.00550
- 1 KENNAMETAL ESX-25 without EX nut
- 1 EWS ESX-25 without EX nut
- 4 left-hand short radial tool holders, Form B2, ref 4100.0100
- 1 ESX-25 collet holder, Form E3 with EX25 nut and 5 mm collet
- 1 same, without EX25 nut
- 3 tapping collets, diam. 4.5 – 6 and 8 mm
- 1 indexable insert drill holder, bore Ø 40 mm, Form E1 ref 4100.00124
- 1 same, bore Ø 32 mm ref 4100.00107
- 1 same, bore Ø 20 mm ref 4100.00105
- 1 boring bar holder Ø 8 mm, Form E2 ref 4100.00108
- 1 same, Ø 10 mm ref 4100.0109
- 1 same, Ø 12 mm ref 4100.0110
- 2 same, Ø 16 mm ref 4100.0111
- 1 same, Ø 20 mm ref 4100.0112
- 1 same, Ø 25 mm ref 4100.0113
- 1 same, Ø 32 mm ref 4100.0115
- 1 GARANT long Ø 32 mm
- 5 steel protection plugs, Form Z2 ref 4100.00130
- 1 left-hand axial tool holder Force C4 ref 4100.00103
- 1 pneumatically controlled tailstock CM 5 ref 180-65.200
- 1 standalone support for microscope ref 180-60.005
- 1 coolant system

OPTION

1 hinged steady rest, 3 jaws, for Ø 30 – 120 mm ref 180-70.200, CHF 2,500.-- + VAT

Subject to error or omission, the technical data is provided without obligation.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.