Parmak birleştirme hattı

DIMTER DKV III Speed max. 80 m/min

DKV III Throughfeed Press with Brake Unit
Completely Overhauled
Available with either original hydraulic motors or converted to servo motors
Options:
- Chain threading device
- Traversing crosscut saw

Function:
Designed for pressing finger joints without stops (in continuous feed mode).
The upper and lower plate chains provide the feed force.
Downstream brake plates transfer the required longitudinal pressing force to the wood via friction.

Advantages:
- High performance despite relatively slow feed
- Absolutely no vertical misalignment of finger joints

Technology:
Heavy-duty 2" plate chain, pneumatically liftable/lowerable
Brake elements floating
Pressing force measurement via contact manometer
Bwsdev T Aqyspfx Afmeh
Height adjustment electric

Maximum pressing force adjustable and dependent on feed speed and wood cross-section,
4500 daN at 32 m/min
2200 daN at 70 m/min

Feed speed adjustable: 10–70 m/min
Drive power:
Infeed unit adjustment 1 kW
Brake adjustment 1 kW
Hydraulic motors 45 kW

Technical data:
Wood width: 90 – 180 mm
Wood thickness: 20 – 80 mm
Thickness-to-width ratio: 6:10

Wood cross-section for 15/16.5 mm finger joints: max. 90 cm²

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.