CNC torna-freze merkezi

DMG CTX Alpha 500

Description:

The machine is in good technical condition, with the possibility of testing after prior arrangement. Control system – Siemens. Including filtration system. Bed tilt: 45°. Bed material: cast iron. Number of guideways: 3 (optionally 4 with Y-axis).

WORKING AREA (V1–V4):
- Swing over bed: 19.69''
- Swing over cross slide: 11.42''
- Maximum turning diameter: 7.87''
Ncjdpfxsx Apkzs Acuel
- Distance between centers: 30.71''
- Maximum turning length: 19.69'' / 15.82'' / 20''
- Max cantilevered workpiece weight (unsupported): 35 lb
- Max center of gravity distance for unsupported workpiece: 165'' from spindle face
- Max workpiece weight between centers: 100 lb
- X-axis travel: 7.48''
- Y-axis travel (opt.): 3.14'' (+/- 1.57'')
- Z1-axis travel: [specify value]
- Z3-axis travel: [specify value]
- Spindle axis height above floor: 20.67'' / 21.65'' / 39.26'' (38.77''+1.18'')

MAIN SPINDLE:
- Spindle nose (flat face): type FL 140h5
- Chuck diameter: 6.69'' (opt. 8.26'')
- Bar capacity: 2.01''
- Spindle bore diameter: 2.87''
- Guide bush diameter: 2.05''
- Front bearing inner diameter: 3.94''
- Spindle bearing lubrication: grease
- Power, max. 100/40% duty cycle: 20.82/36.20 hp
- Speed range, 100% duty cycle: 6,000 rpm
- Speed range, 40% duty cycle: 6,000 rpm
- Nominal speed: 1,500 rpm
- Max. torque, 100/40% duty cycle: 93.72/125.46 ft*lb
- Voltage type, range: AC/1
- Motor type: ISM52

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.