5 Eksenli BAZ / Lazer / 3D / HSK-A63

DMG DMU 60 Evo

Durumu: iyi (kullanılmış), Üretim yılı: 2013, çalışma saatleri: 59.000 h, Fonksiyonellik: tamamen fonksiyonel, Universal Machining Centre DMU 60 eVo Travel (X/Y/Z): 600 / 500 / 500 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Speed range (standard): 20 – 14,000 rpm Motor spindle (power): 18.9 / 14 kW (40/100% duty cycle) Tool holder (standard): SK40 according to DIN 69871 NC swivel rotary table: available Clamping surface (table): 600 × 500 mm Swivel range B-axis: -5° to +110° C-axis: 360° Table load capacity: 400 kg Direct measuring systems: available (direct measuring systems / direct position measuring system) Table cooling: incl. table cooling (mentioned in conjunction with direct measuring systems) Spindle speed (option): 20 – 18,000 rpm (for tool holder HSK-A63 according to DIN 69893) Spindle and tool magazine modification: deviating from standard Spindle speed (max., additional data sheet screenshot): 24,000 rpm Tool magazine (standard): Chain magazine 30 positions, double gripper Tool magazine (option): Tool magazine 60 positions, chain magazine with double gripper (deviating from standard) Control (3D control): Heidenhain iTNC 530 HSCI User interface: SmarT.NC Operator panel: DMG ERGOline® Control Monitor: 19" monitor (mentioned with ERGOline Control) Heat exchanger: Heat exchanger for spindle and table Active cooler: Active cooler for electrical cabinet Njdpfxoyl A Dne Agfsku Full enclosure: available Signal/indicator light: four-color / 4-color (also mentioned in automation) Probe: Infrared probe, Heidenhain TS 649 DMG 3D quickSET toolkit preparation: available 3D quickSET software option: included (per machine) 5-axis machine configurations: only in conjunction with probe option Handling system preparation: PH 150-8 by DMG Automation (preparation mentioned) Chip conveyor: scraper belt chip conveyor with cleaned gap screen Internal coolant supply (ICS): available Paper band filter: 40 bar / 23 l/min / 600 l tank Rotating viewing window: incl. rotating viewing window Seal air: available Linear measurement systems: available Bed flushing: available Rinsing gun for chip removal: available Blow air through spindle center: selectable via M-function Compressed air quality: maintained air with low oil content Safety package for power failure: available Surge protector: available Undervoltage monitoring: with rapid braking control Operating mode: 4 Process monitoring: in production Documentation: Documentation-1 German Screen languages: German/English DMG / MORI SEIKI Messenger (promotional offer): Connection of the first machine (SIE 840D; HDH iTNC530; HDH MillPlus iT) DMG Netservice – client: “Green light for your machine”; installation on external PC Automation PH 150-8 with handling system and pallet magazine Automation design: system in automation design, matching the machine Rotary storage: with 8-fold pallet mounts Servo axes: 2 servo axes (X-axis, magazine table) Z-axis: pneumatic Gripper: gripper arm/fork Basic programming: basic system programming IPC: IPC with touch panel Job manager: DMG AUTOMATION Job manager Operator guidance: graphics-supported operator guidance Signal light: 4-color PH 150-8 integration kit: for DMU 50/70, DMU 40/60/80 eVo linear UPC P chuck: Erowa (UPC P chuck, Erowa) UPC pallets: 320 × 320 mm, incl. clamping pins and pallet coupling, Erowa

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2013, çalışma saatleri: 8.185 h, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, kontrolör üreticisi: HEIDENHAIN, kontrolör modeli: iTNC 530, maksimum mil hızı: 18.000 dev/dak, eksen sayısı: 5, Bu 5 eksenli DMG DMU 60 evo Linear 2013 yılında üretilmiştir ve 600/500/500 mm hareket aralığına, 18.000 rpm'ye kadar iş mili hızına ve 60 pozisyonlu bir takım magazinine sahiptir. Heidenhain iTNC 530 kontrol, 40 bar dahili soğutma sıvısı ve hurda bantlı talaş konveyörü içerir. Karmaşık işleme görevleri için idealdir. Bu makine hakkında daha fazla bilgi için bize ulaşın. • Alet magazini: 60 pozisyon • Hızlı travers: 80 m/dak • Dinamik paket • Dahili soğutma sıvısı: 40 bar • Dönen görüntüleme penceresi • Yıkama tabancalı yatak yıkama sistemi • Çalışma saatleri: 14,471 h • İş mili saatleri: 8,185 h Njdpfxsx D Dyae Agfoku Ek ekipman • Hurda bantlı talaş konveyörü • Kağıt bant filtre, 600 litre • Yağ ve emülsiyon buharı ayırıcı • Heidenhain TS 649 dokunmatik prob • 3D quickSET araç seti Technical Specification Taper Size HSK 63

Durumu: mükemmel (kullanılmış), Üretim yılı: 2014, çalışma saatleri: 66.600 h, Fonksiyonellik: tamamen fonksiyonel, Donanım: devir hızı sonsuz değişken, dokümantasyon / kılavuz, talaş konveyörü, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel paths: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool interface: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table including table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, including rotating inspection window, sealing air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Blow air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero-point clamping system - Enabling/disabling handling system via switch on machine control panel - Additional rinsing in the working area included - Machine preparation for job management included - Operator panel arrangement on the left included - Power supply to the machine table including 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Includes extension of the rotary union to 4 channels Power-on hours: approx. 66,600 h Nkedpsxgnz Tjfx Agfou Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine will be available approx. from Oct./Nov. 2025. The ball screws and linear guides on the X and Z axes have been replaced. Accessories, depicted tools and clamping devices are only included if specified in the additional information. Subject to technical changes, errors and prior sale!

Durumu: kullanılmış, Üretim yılı: 2012, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, Travel: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B-axis swivel range -5° to +110° C-axis 360° Load capacity 400 kg, direct measuring systems including table cooling Dynamics package: linear drives in X / Y axis Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Active cooler for main spindle, linear drive, and table Control: Siemens 840D SL Operate Spindle: 20 - 24,000 rpm HSK-A63 according to DIN 69893 • Tool magazine: Chain-type magazine with 60 positions • Tool length measurement and breakage control Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (ICS), paper filter 40 bar 231 l/min, 600 l tank including rotating inspection window, linear system purge air, bed flushing • Blowing air through spindle center selectable via M-function, filtered air with low oil content • Electronic handwheel Nkedpfx Ageyc Tthofou • Spray gun for chip rinsing • Enhanced chip flushing • Laminated safety glass windows for work area door and side panel • Operation mode 4 • High speed settings • Measuring probe Blum HSK-A63 • Preparation for 3D QuickSet • Optional oil mist extractor • New spindle at 25,800 spindle hours

Durumu: kullanılmış, Üretim yılı: 2014, X-Ekseni hareketi: 600 mm Nkedpfx Aoycxinogfeu Y-Ekseni hareketi: 500 mm Z-Ekseni hareketi: 500 mm Toplam güç ihtiyacı: --- kW Makine ağırlığı yaklaşık: 9,6 t Alan ihtiyacı yaklaşık: --- m DMG MORI DMU 60 EVO (2014) X - 600 mm Y - 500 mm Z - 500 mm Heidenhain iTNC530, TS649 probu ile İş mili devri: 14.000 dev/dak Takım magazini 60 adet / Takım tutucu HSK63 Bant filtre sistemi ile IKZ 40 BAR

Durumu: mükemmel (kullanılmış), Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 10.000 kg, PREMIUMANNONS – DMG MORI DMU 60 eVo (2017) | 5-axlig | TNC 640 | 120 verktygsplatser | Automationsredo | 40 bar Översikt Här erbjuds ett högspecificerat DMG MORI DMU 60 eVo 5-axligt bearbetningscenter, tillverkat i Tyskland, med en kraftfull konfiguration för krävande produktion. Maskinen är förberedd för automation och passar utmärkt för obemannad drift samt framtida integrering av palett-/robotsystem. Viktiga fördelar • Årsmodell: 2017 • Styrsystem: Heidenhain TNC 640 (ERGOline®-styrning, 19” skärm) • 5-axligt NC-sväng-/rotationsbord (B-axel -5° till +110°, C-axel 360°) • 120-positions verktygsmagasin • Höghastighetsspindel upp till 18 000 rpm, SK40 BIG-PLUS • Automationsredo + utökad M65-gränssnitt • Geometriskt protokoll från DMG MORI tillgängligt Utrustning & tillval (maskinens utförande) Styrning / Programvara / Drift • Heidenhain TNC 640, ERGOline®-styrning, 19” display • Driftläge 4 – processövervakning under produktion • Elektroniskt handratt 5-axligt bord / Mätning • NC-sväng-/rotationsbord, 600 × 500 mm • B-axel -5° till +110°, C-axel 360° • Max belastning: 400 kg • Direktmätsystem (rotationsaxlar) • Renishaw OMP60 optisk IR-mätprobe Spindel / Verktyg / Magasin • Spindelgränssnitt: SK40 BIG-PLUS 18 000–20 000 rpm, 35 kW (40 % ED) / 25 kW (100 % ED) • Verktygsmagasin: 120 platser (kedjemagasin med dubbelgripare) Nkedpfjygky Tjx Agfsu • Verktygsbrottsdetektering TRS2 (kontaktlös – lämplig även för små diametrar) Kylning / Spånhantering / Kapsling • Invändig kylmedelstillförsel (IKZ) 40 bar (pappersbandfilter, tank 600 l) • Spåntransportör • Utökad spånsköljning (extra rengöring av arbetsområdet) • Spåntvättpistol • Spindelcentrerad luftblåsning (styrbar via M-funktion, konditionerad luft med låg oljehalt) • Roterande säkerhetsfönster (roterande observationsruta) • Olje- och emulsionsdimavskiljare (mekanisk) • Automationsförberedd • Utökad M65-gränssnitt Anslutning / Service • DMG MORI Messenger (installationskit för maskinuppkoppling) • DMG MORI Netservice-klient (fjärrdiagnostik via extern PC)

Durumu: mükemmel (kullanılmış), Üretim yılı: 2018, Tablo boyutu 600 x 500 mm çap, tablo yükü 400 kg, Nedpfx Agswnpzasfeku XYZ 600 x 500 x 500 mm hareket mesafesi, B ekseni -5/+110 derece, C ekseni 0,001 derece Hızlı besleme hızları 80 m/dak, 120 istasyonlu takım değiştirici, mil konikliği HSK 63 mil hızı 20.000 dev/dak, Siemens 840D eRGOline kontrolü Talaş konveyörü. Mil Soğutma Sıvısı

Durumu: mükemmel (kullanılmış), Üretim yılı: 2013, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, DMG-Mori DMU 60 Evo Linear Control: Heidenhain ITNC 530 HSCI NC swivel rotary table: 600 mm x 500 mm B-axis swivel range: -5° to +110° C-axis: 360°, incl. table cooling Spindle speed: 20 - 24,000 rpm, HSK 63 A Tool magazine with 120 stations Infrared probe: Renishaw OMP 60 Dynamic package Laser tool measurement ICS with 40/80 bar and paper band filter (980 l), chip conveyor Electronic handwheel, 3D Quickset Nkedpfoxvhtnjx Agfsu ATC, programmable coolant nozzles via M-function Operating mode 4 Tropic package

Durumu: mükemmel (kullanılmış), Üretim yılı: 2014, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, Donanım: devir hızı sonsuz değişken, talaş konveyörü, DMG-MORI DMU 60 EVO linear, 2014 model year Travel X/Y/Z: 600 mm x 500 mm x 500 mm Motor spindle SK40 with 18,000 rpm NC swivel rotary table, B and C axes Tool magazine with 60 positions Heat exchanger for spindle and table Dynamic package Control unit: Siemens 840 D SL with Shop-Mill Infrared probe Heidenhain TS 649 Laser tool measurement Blum Scraper belt conveyor, high-pressure coolant with paper band filter and 80 bar Oil mist/emulsion separator Programmable coolant nozzles Electronic handwheel, Mode 4 Turning-milling cycle Nsdpfx Aoxvhrwogfeku

Durumu: iyi (kullanılmış), Üretim yılı: 2014, çalışma saatleri: 21.000 h, Fonksiyonellik: tamamen fonksiyonel, DMG MORI DMU 60 Evo 5 Eksenli Eşzamanlı İşleme Merkezi (2014) Üretici: DMG Mori Tip: DMU 60 Evo 5 Eksenli Eşzamanlı Üretim yılı: 2014 Nsdpfowp Ic Eex Agfoku Durum: iyi, kullanılmış, 2024'te yeni mil Çalışma saatleri: 37.063 saat Mil saatleri: 21.313 saat Kontrol: Heidenhain ITNC 530 Durum: kullanılmış, kullanıma hazır Hareket x/y/z 600/500/500 mm Hızlı hareket 80 m/dak Hız 20-14.000 rpm Takım magazini 30 Takım tutucu SK40 NC döner döner tablalar 600x500 mm Bant filtre sistemli dahili soğutma sıvısı beslemesi 40 bar Ölçüm probu TS649 Belgeleme