CNC torna tezgahı

DN Solutions PUMA2600 SLYB II

For sale: turning center with sub-spindle and Y-axis. Machine is in perfect condition, purchased new in mid-2023, and is still in operation. It has logged just under 8,000 hours and is machining parts significantly below its technical capacity. Maintained exclusively by the authorized distributor. Adapted for robotic integration: equipped with autodoor and output signals for communication. Comes with a parts conveyor and oil mist filter. NOTE: The offer does not include the robot – sale and implementation support for a robot are available upon separate quotation.

TECHNICAL DATA as per manufacturer's specification:

1) Capacity
Swing over bed: 680 mm
Swing over cross-slide: 630 mm
Max turning diameter: 376 mm
Recommended turning diameter: 315 mm
Max turning length: 1245 mm
Max load (incl. chuck):
In chuck: 500 kg (with support: 1000 kg)
Bar capacity (spindle bore): 102 mm

2) Main Spindle
Chuck size: 315 mm
Spindle head: A2#11 ASA
Spindle bearing diameter (front): 160 mm
Spindle bore: 115 mm
Chuck through hole: 103 mm
Spindle drive motor power (cont./30 min): 26/22/18.5 kW (S3 25% / S6 60% / S1 Cont.)
Spindle speed range: 2 – 800 rpm
Max spindle torque: 1123 Nm (15 min S3 15%)
Nodpfx Ajx Rqkued Hskw
Power transmission: belt

3) Sub-Spindle
Chuck: 175 mm (optionally 210 mm)
Spindle head: A2#5 ASA
Spindle bore (diameter): 62 mm
Sub-spindle cylinder through hole: 50 mm (H8)
Sub-spindle drive motor power (cont./30 min): 7.5/5.5 kW (30 min / S1 Cont.)
Spindle speed range: 4,500 rpm
Max spindle torque (30 min): 85 Nm
Power transmission: belt

4) Travels
X-axis: 260 mm
Z-axis: 1350 mm
Y-axis: 105 (±52.5) mm
B-axis: 1350 mm
C-axis: 1,2 360 (in increments of 0.001 degree)
Rapid traverse X: 30 m/min
Rapid traverse Z: 30 m/min
Rapid traverse Y: 10 m/min
Rapid traverse B: 30 m/min
C-axis: 200 rpm

5) Bed and Saddle
Slant bed, angle: 30°
Bedway width (Z-axis): 437 mm
Saddle way width (X, Y-axis): 321 / 325 mm
Sub-spindle travel: 335 mm

6) Tooling System
Tool holders: BMT 65P
Number of tools: 12
Tool dimensions: 25 x 25 mm
Max drill diameter: 50/32 mm (main spindle/sub-spindle)
Driven tool power: 7.5/1.5 kW (5 min/Cont.)
Driven tool speed: 5,000 rpm
Driven tool torque: 95.5 Nm
Driven tool collet (ER32): Φ3–Φ20mm (optional)
Turret index positions: 1 position
Indexing time: 0.15 s (1.2 s for full station)
Max driven tool drilling diameter: Φ20 mm
Threading: M20 x P2.5

7) Hydraulic System
Tank capacity: 20 l
Flow rate (60/50 Hz): 25 / 20.8 l/min
Pressure: 2.2 kW x 5.0 MPa

8) Coolant
Tank capacity: 250 l
Flow rate: 30 l/min
Pressure: 0.7 kW x 0.15 / 0.1 MPa (60/50Hz)

9) Machine Precision
Positioning accuracy:
X-axis: 0.01 mm
Z-axis: 0.02 mm
Y-axis: 0.02 mm
C-axis: 0.0167 degrees
Repeatability:
X-axis: ±0.002 mm
Z-axis: ±0.003 mm
Y-axis: ±0.003 mm
C-axis: ±0.006 degrees

For questions or additional information, please send a message or call.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.