Yüksek hızlı radyal matkap makinesi

DONAU Donaumeric 440

Drilling capacity in steel (diameter): 40 mm
Throat depth: 1050 mm
Speed: 15 - 2800 rpm
Feed range: 0.075 - 0.45 mm/min
Dimensions: 2450 x 1300 x 2300 mm
Weight: 1500 kg

Equipment:

• Machine in top condition
• Serviced and overhauled in 2026 by factory service

Machine specifications:
• Worktable 1800 x 600 mm with 4 T-slots
Ksdpfxjy Nd T He Ac Esdp
• Arm travel: 1050 mm
• Drilling spindle: SK 40 with tool clamping device
• Infinitely variable speed programming
• Infinitely variable quill feed via three-phase servomotor
• 2 T-slots, 18 mm, on rear machine base
• 2 T-slots, 18 mm, on left machine base
• Thread cutting device
• Centralized lubrication
• Coolant system
• Machine lamp
• CE marking
• Safety guard
• USB interface

Dimensions and travels:
Tool holder: SK 40
Column diameter: 195 mm
Table size: 1800 x 600 mm
Number of T-slots: 4
T-slot spacing: 125 mm
Quill travel (Z axis): 200 mm
Column travel (W axis): 410 mm
Distance spindle nose to table (min): 70 mm, (max): 680 mm
Distance spindle nose to floor (min): 970 mm, (max): 1580 mm
Drilling radius: 540 - 1590 mm
Work table height: 900 mm

Machining values:
Drilling performance, solid material:
St 60 ? 40
GG 22 ? 50
Thread cutting:
St 60 M36
GG 22 M42

Main spindle drive:
AC motor, frequency-controlled, 5.5 kW at 100% duty cycle
Speed range: 15 - 2800 rpm
Max. torque: 250 Nm
Constant torque from 15 – 2000 rpm

Feed drives:
X-axis – AC servo motor: 0.25 kW
Y-axis – AC servo motor: 0.25 kW
Z-axis – AC servo motor: 4.5 kW
W-axis – AC servo motor: 2.5 kW
Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min
Rapid traverse speed (W): 3 m/min
Infinitely variable feed rates: 5 – 2000 mm/min

Precision:
Positioning accuracy X, Y axis over 1200 mm: ± 0.075 mm

Electrical data:
Operating voltage / frequency: 400 V / 50 Hz
Control voltage: 24 V
Hydraulic unit for clamping: 0.75 kW
Total connected load: 13.0 kVA

Weight Danumeric 440 (without packaging), with table 1800 x 600 mm: 2800 kg

CNC Control:
Axes: 3 (X, Y, Z)
Processor: 32-bit CPU
Screen: TFT flat panel, backlit, easy to read from all angles, 215 x 160 mm
Position display: Cartesian or polar; measurements: absolute or incremental; units: mm/inch or degrees
Interpolation: 2 axes (X, Y)

Technology database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions
Tool management: Max. 500 tools
Subprogram technology: Yes

Standard software options: Conversational programming, 38 workpiece zero-point shifts, rotate and mirror, teach-in for X, Y, Z, program restart with selectable re-entry options
Zero-point determination: cycles for determining zero points by manual probing of workpiece for:
- Freely clamped rectangular workpieces
- Freely clamped round workpieces
- Alignment of cast and flame-cut parts
- Angle orientation detection on round parts by probing reference edges or faces
Test graphics: Graphic display of drilling patterns

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.