Elumatec SBZ 122/73, eluCad dahil

elumatec AG SBZ 122/73

Machine information:

The machine comes from a metal fabrication company specializing in the production of aluminum windows, doors, and façades. It was purchased in 2018 to relieve several 5-axis machines, specifically for aluminum front door manufacturing. Due to company restructuring, this machine was no longer utilized and became available.

The machine was thoroughly cleaned, inspected, and serviced at the Weyand company facilities. All worn parts have been replaced.

Programming can be carried out either directly on the machine (eluCam) or via the included office software eluCad. Also included is the software option package for data import of ECW, NCW, and V6 files, e.g. for LogiKal or Wictop systems.

Machine description:

- For efficient machining of aluminum, plastic, and steel profiles
- Continuously adjustable A-axis from -120 to +120 degrees
- Linear guides for clamp movement
- Improved machining results through intelligent control technology
- Fast positioning of the processing unit with up to 120 m/min thanks to dynamic servo drives
- Thread cutting without compensating chuck
- Automatic clamp detection and positioning
- Automatic tool changer
- 4-axis control
- No reference run for main axes required thanks to absolute encoder systems
Bwodpfxjyr H Abe Almsl
- Collision avoidance through automatic clamp detection and positioning
- Power-torque milling motor with closed-loop speed control for rapid spindle acceleration and deceleration
- Certified drive-integrated safety functions

- Low power consumption through intelligent control technology. Energy recovery via DC link coupling between axis drives with feedback and buffering of regenerative braking energy

- Green-Line cooling unit for control cabinet with reduced energy consumption

- Windows operating system
- 15" flat screen, USB ports and network connection
- Easy and convenient programming with eluCam at the operator terminal, even during running operations
- Remote maintenance via TCP/IP if internet connection is available

Equipment:
- Enclosure for operator protection
- Four horizontal pneumatic clamping devices
- Left-hand material stop
- Minimum quantity lubrication
- Hand-held control device
- Depth gauge

Technical data:
- Max. machining length without end-face machining: 4,050 mm
- X-axis travel: 4,176 mm, Vmax. 120 m/min
- Y-axis travel: 1,040 mm, Vmax. 60 m/min
- Z-axis travel: 540 mm, Vmax. 30 m/min
- Machining directions: 3+2 (top, rear, front)
- Positioning accuracy: +/- 0.1 mm
- Milling spindle speed max.: 20,000 rpm
- Milling spindle power: 7 kW, S1 (water-cooled)
- Tool holder: HSK-F63
- Automatic tool change
- Twelve tool positions in automatic magazine
- Max. disc cutter diameter: 120 mm
- Max. tool length (from taper): 150 mm
- Automatic clamp movement
- Basic clamps (with circular guide)
- eluCam software

- Compressed air connection: >7 bar
- Electrical connection: 400 V, 50 Hz, 22 A
- Air consumption per minute: approx. 185 l (during spraying)

Accessories for the machine (used):
- Full enclosure SBZ122/7x (rear panel + roof)
- Complete HSK-F63 d16 L=155 holder for disc cutter
- Disc cutter D=92x6.0mm Z=14 d=16, carbide teeth
- Right-hand stop SBZ 122170171173 with 2nd clamping circuit, for processing over-length parts
- Various used tool holders and cutters
- ESTA swarf extraction unit

eluCad:
- License for eluCad connectivity
- eluCad data import package for ECW, NCW, and V6 files

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.