Çubuk işleme merkezi

Elumatec SBZ 150

elumatec SBZ150 Profile Machining Center 6.0m

5-axis control. Efficient processing of aluminum and steel profiles
Working length: 6,000 mm

Description:
Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter with 50 mm diameter, angular head or special milling cutter with max. 100 mm diameter); Six-sided machining; Underside machining with angular head (option);
Rapid positioning (up to 60 m/min) of the machining unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning;
Dual-circuit clamping system with two pneumatically pivoting stops; Standard with automatic central lubrication system;
Stable machine bed for 6,000 mm working length;
Continuous support table;
Clamping system with integrated six-row roller recirculating units and linear guides.
5-axis industrial PC control, including
3 axes as path control; Highly dynamic three-phase AC servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable;
With color monitor and floppy disk drive;
Storage capacity of over 200,000 sets;
3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc.
Integrated network card 10/100 MBit, RJ45 connection (network hookup to be provided by customer's administrator)
Analog modem (customer must provide analog phone line)
Iodpfxew A Rv Is Ac Eetp

Technical Data:
Travel range X-axis: max. 6,240 mm
Max. travel speed: 60 m/min
Travel range Y-axis: 1,000 mm
Max. travel speed: 30 m/min
Travel range Z-axis: 635 mm
Max. travel speed: 30 m/min.
Swivel angle A-axis: 0-90°, freely programmable
Swivel angle C-axis: 0-355°, freely programmable
For further details on the milling area, see Drawing No. 150 05 17 08
Max. machining length for end face machining left + right: 6,000 mm (with tool length 150 mm)
Positioning accuracy:
X-axis +/- 0.1 mm / 1 m length
Y-axis +/- 0.1 mm
Z-axis +/- 0.1 mm

Milling Spindle:
Speed [rpm]: up to 100-22,000
Power [kW]: 15
Tool holder: HSK-F 63
Milling cutter diameter: max. 100 mm
Saw blade diameter: 400 mm
Tool length: max. 150 mm from nominal taper size.

Included Accessories:
Automatic tool changer (without tool holders)
Dual-circuit clamping system with 2 pneumatically pivoting material stops
Automatic clamp detection and positioning
8 horizontal pneumatic material clamping units
Tool preset gauge
Front light barrier
Saw blade DM400 with holder
Angle milling head

Important:
The profile machining center is equipped as standard with front light barrier safety. For any required side or rear safety, it is the customer's responsibility or please request our offer for safety fencing.

Incl.
Angle milling head for underside machining

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.