Kullanılmış Elumatec Sbz 150 satın al (6)

Üretim yılı: 2003, Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles, 7.3m Due to a change in our production to a tube laser system, we are selling our fully functional Elumatec SBZ 150. The last service was carried out by Elumatec in March 2026; since then, the machine has not been in use. Potential buyers are welcome to visit at any time. We are happy to demonstrate and have the machine tested on-site. Lrodpfxoy Dvq He Aiqjk Technical data: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end-face processing: 7,300 mm - Max. machining length with end-face processing: 6,980 mm - Tool changer with 10 positions, as well as a saw blade holder - 8 material clamps - Tool interface: HSK63 - Spindle power: 15 kW / 22,000 rpm - Double-layer processing - Minimum quantity lubrication - Central lubrication - Saw blade diameter: 400 mm The machine is available immediately. Space requirements: please see the attached layout. Transport instructions are also attached; should you have any questions, please do not hesitate to contact us. Dismantling, loading, and transport should, for ease of reassembly, preferably be organised by the buyer. Various auxiliary tools can be provided upon prior agreement, subject to availability. All details and dimensions have been provided to the best of our knowledge; however, we do not guarantee completeness or accuracy. The sale is as viewed, without warranty, right of return, or similar provisions. Subject to prior sale.

Üretim yılı: 2005, Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, elumatec SBZ150 Profile Machining Center 6.0m 5-axis control. Efficient processing of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter with 50 mm diameter, angular head or special milling cutter with max. 100 mm diameter); Six-sided machining; Underside machining with angular head (option); Rapid positioning (up to 60 m/min) of the machining unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Lrsdpfx Aisw A Rv Ieqsk Dual-circuit clamping system with two pneumatically pivoting stops; Standard with automatic central lubrication system; Stable machine bed for 6,000 mm working length; Continuous support table; Clamping system with integrated six-row roller recirculating units and linear guides. 5-axis industrial PC control, including 3 axes as path control; Highly dynamic three-phase AC servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color monitor and floppy disk drive; Storage capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ45 connection (network hookup to be provided by customer's administrator) Analog modem (customer must provide analog phone line) Technical Data: Travel range X-axis: max. 6,240 mm Max. travel speed: 60 m/min Travel range Y-axis: 1,000 mm Max. travel speed: 30 m/min Travel range Z-axis: 635 mm Max. travel speed: 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on the milling area, see Drawing No. 150 05 17 08 Max. machining length for end face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling Spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper size. Included Accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically pivoting material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with holder Angle milling head Important: The profile machining center is equipped as standard with front light barrier safety. For any required side or rear safety, it is the customer's responsibility or please request our offer for safety fencing. Incl. Angle milling head for underside machining

Üretim yılı: 2004, Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 9.500 mm, Y ekseni hareket mesafesi: 1.000 mm, Z ekseni hareket mesafesi: 630 mm, maksimum mil hızı: 24.000 dev/dak, makine/araç numarası: 031809, TECHNICAL DETAILS Travel X-axis: 9,500 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110° freely programmable in 0.1° increments Swivel angle C-axis: ±182° freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum milling cutter diameter: 100 mm Maximum disc cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Lredpfoycul Sox Aiqjk Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with spray EQUIPMENT Machining processes: milling, drilling, tapping, thread milling, broaching, and sawing with stationary profile bar 6-sided machining: front optional, possible from below Profile bar protection: machining with stationary profile bar Robust, low-wear direct drives on all axes Axes: 5-axis control for spatial machining Screen: 15-inch color monitor Interfaces: USB ports, network connection 2-layer machining for pendulum operation Supplied tools (HSK holders) Two circular saws for aluminum Note: Documentation for the dismantling of the machine is enclosed.

Üretim yılı: 2001, Durumu: kullanılmış, Resimler ileride - makine elden geçiriliyor Teknik veriler: - Travers yolu X ekseni: 7300mm - Travers yolu Y ekseni: 1000 mm - Travers yolu Z ekseni: 650 mm - Dönme açısı A ekseni: 0-90° serbestçe programlanabilir - Dönme açısı C ekseni: 0-355° serbestçe programlanabilir - Maks. Uç yüzey işleme olmadan işleme uzunluğu: 7300mm Ledpfxot Ea Tfj Aiqerk - Maks. Uç yüzey işleme ile işleme uzunluğu: 6980mm - 10 yer ve testere bıçağı tutuculu takım değiştirici - 9 malzeme kelepçesi - SK30 takım tutucu - 2 katmanlı işleme

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 1500050285, X ekseni hareket mesafesi: 7.800 mm, Y ekseni hareket mesafesi: 1.000 mm, Z ekseni hareket mesafesi: 630 mm, maksimum mil hızı: 24.000 dev/dak, takım magazinindeki yuva sayısı: 14, Teklif verme, 23.12.2025 tarihinde zamanında teslim almayı zorunlu kılar! TEKNİK DETAYLAR X Ekseninde İşleme Mesafesi: 7.800 mm Y Ekseninde İşleme Mesafesi: 1.000 mm Z Ekseninde İşleme Mesafesi: 630 mm X Ekseninde Hızlı Hareket: 70 m/dak Y Ekseninde Hızlı Hareket: 40 m/dak Ledpexx Uf Nefx Aiqsrk Z Ekseninde Hızlı Hareket: 40 m/dak Parça Uzunluğu (maks.): 7.300 mm Maksimum Mil Devir Hızı: 24.000 dev/dak Mil Motoru Gücü: 15.000 W Mil Sayısı: 1 Takım Magazin Yuvası Sayısı: 14 Takım Çapı: 100 mm MAKİNE DETAYLARI Giriş Voltajı: 400 V Giriş Akım Tipi: Alternatif Akım (AC) DONANIM Dokümantasyon/Kullanım Kılavuzu Dokuz standart takım, beş özel takım ve bir testere bıçağı ile donatılabilen magazin On adet sıkıştırma cihazı Pendel işleme için iki ayrı çalışma alanı 15" renkli ekran Disket sürücüsü DOS işletim sistemi

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 1999, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 1500050123, dönüş hızı (maks.): 18.000 dev/dak, çalışma uzunluğu: 12.000 mm, Asgari fiyat yok – en yüksek teklife garantili satış! TEKNİK DETAYLAR Lrjdpfxoxnz Ive Aiqek Maks. devir sayısı: 18.000 dev/dak İşleme uzunluğu: 12 m Pnömatik pensler: 20 adet MAKİNE DETAYLARI Elektrik verileri Gerilim: 400 V Faz: 3 ~ Frekans: 50 Hz Akım çekişi: 76 A Çalışma basıncı: yakl. 8 bar DONANIM Otomatik takım değiştirme Açı aparatı