İşleme merkezi / Geçişli merkez Elumatec SBZ 628 XXL

Elumatec SBZ 628 XXL

The SBZ 628 series offers maximum flexibility for machining and cutting aluminum profiles. It is used both in metal construction and in industry. Its advantages, such as production reliability, speed, cost-effectiveness, and impressive versatility, make this flexible bar machining center a perfect all-rounder. Up to eight milling units, which can be freely positioned on the profile cross-section, in combination with innovations like the combined clamping system, traveling clamp, and swiveling gripper, enable fully automatic machining of a wide variety of profile types—such as those for windows, doors, and facades.

SBZ 628 XXL: Pass-through System for Windows, Doors, and Facades

- Up to eight spindles for milling or drilling
- Various mitre cutting strategies from 22.5° to 157.5° (pivoting)
- Additional saw unit from 45° to 135° (tilting)
- Combined notching cuts
- Quick-change systems for clamping rollers and plates for atypical profiles
- Mode for manual loading and clamping of unstable profiles.

Machine Equipment

- Loading magazine on the left for fully automatic production operation
- Milling spindles infinitely positionable 360° to the profile bar, as well as 360° infinitely adjustable cut angles for processing profiles in different clamping situations
- Spacious soundproof cabin and easy-to-access operation and maintenance elements facilitate working
- Machined profiles are gently placed on the unloading magazine

Max. profile cross-section (W x H): 320 x 160 / 160 x 320 mm
Min. profile cross-section: 30 x 10 mm
Raw bar length: 7,600 mm
Finished part length: 350 – 7,600 mm

Feed Magazine
Shortest raw bar length: 1,500 mm
Number of swings: 5
Support positions: 10 (for widths over 120 mm: 3-5)

Infeed
Servo-driven linear
Gripper adjustment: electric Y/Z
Gripper rotation: standard
Offcut processing: fully automatic

Machining Station
Axes: 5
Milling spindles: 8 (pre-controllable)

Saw
Axes: 3 + 3
Codpfx Aaoxtdwwsteri
Saw blades (diameter): 2 (550 mm)
Saw angles: 22.5°–157.5° (pivoting), 45°–135° (tilting)
Notching cuts: standard (top and rear)

Outfeed Conveyor
Lifting station: yes
Number of swings: 8
Outfeed conveyor width: 4,000 mm

The system is in good condition, will remain fully assembled until the end of November, is immediately available, and will be delivered free on truck.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.