CNC dikey torna tezgahı

EMAG VLC 400

Technical Details
Maximum workpiece diameter: 400 mm
Maximum workpiece length: 300 mm
CNC control: SIEMENS 840Dsl
Swing diameter: 520 mm
Chuck diameter: 500 mm
Travel axes (X / Y / Z): 995 / ±30 / 580 mm
Additional Information
Total operating hours: 1848h

1.2.2 TURRET BASE UNIT AND Y-AXIS SLIDE UNIT
The Y-axis slide unit is mounted laterally to the machine base frame. A highly responsive, maintenance-free, position-controlled servo motor is used for axis drive. The slide is driven via a high-precision ball screw. The Y-axis is equipped with a linear measurement system. Position deviation: 2 µm.
TURRET BASE UNIT
Shortest indexing times due to direct drive, cooled for consistent accuracy.
MAIN SPINDLE 37.7 KW

1.2.3 HP TURRET DRIVE UNIT FOR DRIVEN TOOLS (C442)
With internal coolant supply to the tool.*
Max. speed: 6,000 rpm
Dedpfx Acsx D U Alowscr
Nominal speed: 3,200 rpm
Torque at 100% duty cycle: 54 Nm / 18.1 kW
Torque at 40% duty cycle: 83.6 Nm / 28.0 kW
Torque at 10% duty cycle: 100 Nm / 33.5 kW

1.2.4 TOOL HOLDER UNIT FOR DRIVEN TOOLS, 12x BMT75
For BMT75 tool holders

1.2.6 CIRCULATING WORKPIECE TRANSPORT SYSTEM, O VERSION
Drag frame system for 10 workpieces
Max. workpiece height (incl. pallet): 300 mm
Max. workpiece weight: 60 kg

1.2.7 SET (10 pcs.) DRAG FRAMES FOR O-BAND
For workpiece diameter: 150 - 400 mm

1.2.8 BLOW-OFF FOR WORKPIECE AND CLAMPING DEVICE (PICK-UP)

1.2.10 COOLANT SUPPLY 15 bar
Coolant pump delivery rate: approx. 80 l/min at 15 bar
COOLING UNIT (6.5 kW, water – air)
A chiller (with dual-circuit technology) regulates machine thermal management, keeping the spindle drive, control cabinet, and turret at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW

1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE
Filtration fineness: 100 µm, with electric and mechanical contamination indicator

1.2.12 CHIP CONVEYOR, HINGED BELT TYPE – REAR DISCHARGE
Discharge height: 1100 mm. / With integrated coolant tank, capacity approx. 500 l.

1.2.13 EMULSION MIST EXTRACTION
Extraction capacity: approx. 800 m³/h

1.2.14 RINSING GUN

1.2.16 WORKPIECE MEASUREMENT
With measuring probe, fully protected against chips and coolant outside the work area.

1.2.17 MEASURING PROBE BLOW-OFF

1.2.19 ENGRAVING SOFTWARE PACKAGE

1.2.20 INVENTORY MONITORING – SISTER TOOL MANAGEMENT

1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU – EUROPE
(SIEMENS 840Dsl, FANUC 31i/32i)

1.2.23 3-COLOR SIGNAL LAMP

1.3.2 AXIAL DRILLING AND MILLING HEAD – BMT75 CC

1.3.3 ANGLE DRILLING AND MILLING HEAD 90° – BMT75 CC (i=1:1)

1.3.4 SET OF TOOLS FOR OP10 + OP20

1.3.7 HYDRAULIC POWER CHUCK CYLINDER SIZE 150 – WITH SINGLE MEDIA PASSAGE
Coolant is supplied to the workpiece through the main spindle and the chuck.

1.3.10 3-JAW POWER CHUCK KNCS-N 500-155 QUICK CHANGE
n max. = 2200 rpm (reference speed according to DIN 6386)
– Set of hard base jaws
– Set of soft top jaws

1.3.11 COMPONENTS FOR KNCS-N 500-155
Comprising:
– Chuck flange DIN 55026 A11
– Drawbar adapter with through-hole and shut-off valve for central air or coolant supply
– Mounting screws

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.