çift gönye testere

emmegi Classic Magic

Emmegi Classic Magic 500 5 Meter

Electronic double mitre saw with automatic feed of the movable cutting head, powered by a brushless motor with numerical control system. Pneumatic control of angle adjustment at three fixed positions: 90°, 45°, and 22°30' (external), or with a mechanical system for manual setting of intermediate angles. Hydro-pneumatic feed of the saw blades. Swiveling heads: Head rotation along the horizontal axis is performed by pneumatic cylinders, allowing for angles from 90° to 22°30' (external); intermediate angles can be set using manually adjustable special stops. The mobile units feature integrated pneumatic drop-down safety covers for the machining area.

Pneumatic Intermediate Support
The pneumatic intermediate support is extremely useful when cutting light profiles of considerable length. In this case, the pneumatic support automatically provides optimal profile support.

Additional Clamp for Profile Support on Roller Conveyors
After each cut, the remaining short profile section tends to fall onto the roller conveyor, with a risk of touching the saw blade edge while the cutting phase is still ongoing. This movement can damage both the workpiece and the freshly cut piece. The additional vice installed on the roller conveyor prevents this problem by holding the profile securely throughout the cutting process.

Year of manufacture: 2019, like new! The saw has seen very little use; even the protective film is still on some parts!
Unfortunately, since the saw does not have a cut counter, it is impossible to say exactly how many cuts it has performed. However, it is immediately apparent during inspection that the saw is truly in mint condition with very little previous use. It was used by its previous owner solely for training purposes.

Njdpfxjw Svxlj Agfswc
Backlit LCD display
Ready for industrial label printer connection
USB port
Single cut operation
Memory for 99 profile correction values and automatic calculation of section length for mitre cuts
Memory for 20 cut lists entered via the keyboard (each with 50 items)
Memory for 10 cut lists (each with 100 items) uploaded from an external PC via RS232 serial interface

MACHINE FEATURES
Position detection of the movable unit via direct measuring system with magnetic tape
2 carbide-tipped saw blades, diameter 500 mm
Pneumatic full safety guards over the cutting area
2 pneumatic horizontal clamps with low-pressure safety device
Profile support roller conveyor
Lubrication system: mist spray unit or minimal quantity pulse spray unit
Cuts with Ø 500 mm saw blades in mitre range from 22°30’ (external) up to 90°
Manual profile support
Preparation for automatic start of MG4 chip extraction unit
Two standard profile inserts
Metric measuring scale
Label printer incl. label peeling function
Oversize cutting
Shortcut
Cross cut
Macro
Automatic cut
Software package pro

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.