Sac metal çapak alma makinesi

ERNST / Lissmac ATLAS EBR

DEBURRING MACHINE
MANUFACTURER: ERNST / LISSMAC
MODEL: ATLAS EBR
YEAR OF MANUFACTURE: 2013

Condition: Used
Operating hours: 2,300 hours
Working width: 1,500 mm
Max. pass-through: 1,520 mm
Workpiece thickness: 1–100 mm
Feed rate: 0.5–4.0 m/min, stepless
Transport belt: Rubber
Working height: 1,000 mm
Max. part weight: 160 kg/m²
Deburring roller: 420 mm diameter
50 oscillating strokes per minute
Drive motor: 15 kW
Abrasive size: 1,540 mm x 1,540 mm
ATLAS Brush Module – SPIN
2 rotating brush units, 300 mm x 260 mm
Csdoxuu Dkepfx Aatjhd
Vacuum system for small parts: 200 mm wide, 80 x 80 mm

Infeed table (LxWxHx work width x sheet thickness):
2704 x 385 x 1650 x 0.8 – 100 mm
Deburring module: 2704 x 580 x 1650 x 1500 x 0.8 – 100 mm
Brushing module: 2704 x 870 x 1650 x 1500 x 0.8 – 100 mm
Outfeed belt cleaning:
2704 x 290 x 1650 x 1500 x 0.8 – 100 mm
Deburring module
Power Electric Compressed air Extraction m³/h Weight
16 32 6/80 bar 2500/25 400 kg
Brushing module
12 24 6/80 2500/725 1600 kg
Rotor module
20 40 6/10 4500/25 1800 kg
Outfeed module
1 2 - - 400 kg

Operating voltage: 400 V / 50 Hz
Special voltage: 480 V / 60 Hz
Control voltage: 24 Volt
Compressed air: 6 bar, dry and oil-free
Feed rate: 0.5–4 m/min stepless
1.0–8 m/min stepless (option)
Working height: 1,000 mm
The external filter is not included in the sale. Working width 1,500 mm, thickness up to 100 mm. The vacuum table runs the full width of the machine. The first unit is a grinding roller (foam rubber roller covered with abrasive paper, pneumatically tensioned), which can optionally oscillate and levels the burr. The second module consists of two steel wire brush rollers to round/knock down the burrs. Then follows a rotor module (rotating multi-brush head) for fine rounding.

EC Declaration of Conformity
The dry dust extractor is not included, but we can offer a suitable system immediately (OPTION).
Operating manual included.

The machine is sold without an infeed roller table!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.