Çalışma platformlu yarı römork

ES-GE 3-Achs Megatrailer, hydr. Heckabsenkung

You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.

Excerpt from the equipment list. Full specification on request.

Chassis:
* Welded construction from high-quality steel profiles with punched cross members, suitable for high ground or point loads, featuring a heavy-duty outer frame
* Rear loading floor as a steel welded construction, equipped with two welded-in outer driving rails made from 5-hole steel plate (hole pattern system Lohr/Rolfo), hydraulically lowerable over a length of approx. 2,250 mm by approx. 350 mm
* Rear of vehicle incorporates a hydraulically extendable loading table (approx. 1,500 mm) as a steel welded structure with 5-hole steel plate (hole pattern system Lohr/Rolfo) cover, lamp mount, and 2 ramp compartments with ramp supports
* Rear section operated and controlled via an electric-hydraulic power unit, mounted in a stainless steel box on the left side of the chassis, controlled by radio remote control
* Power supply via the towing vehicle’s battery (NATO socket on the front wall, no connecting cable to the tractor)

Kingpin:
* 2-inch kingpin, replaceable from below

Underrun Protection:
* According to EU standards, fixed mounted

Landing Legs:
* 2 x 12 t landing gears with 2-speed gearbox

Axles:
* 3 x 9 t air suspension axle units
* Make: SAF with disc brakes approx. 370 x 45 mm
* ABS
* 10-hole wheel connection, centered, ET120
* Total air suspension stroke approx. 310 mm (raising approx. 220 mm, lowering approx. 90 mm)
* Air suspension control via hand lever with stop function

Lift Axle:
* 1st and 3rd axles liftable automatically, additionally switchable via controls on the chassis frame or via PIN 12 of the lighting socket

Tyres:
* 6x, 445/45R19.5, on 14.00x19.5 rims, 10-hole ET120 fitted

Mudguards:
* According to EU standards, 1/4 PVC mudguards
* 1st axle front and rear, 2nd and 3rd axle rear

Brake System:
* Make: Wabco
* Dual-line brake system according to EU standards, with EBS and automatic load sensing
* Spring actuators serving as parking brakes on 2 axles
* Interchange-proof coupling heads fixed to the front cross member, without connecting line to the tractor

Lighting System:
* According to EU standards, 24 Volt,
* Multi-chamber rear lights
* License plate lights
* LED side marker lamps
* LED position lamp (white) front and LED lane marker lights on the rear
* 15-pin socket as well as 2x 7-pin sockets fixed on the front cross member, no connecting lines to the tractor

Load Securing:
* 9 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t
* 8 pairs of folding lashing rings evenly distributed, lashing capacity approx. 2.5 t
* 2 pairs of folding lashing rings at vehicle rear, lashing capacity approx. 2.5 t
* Drilled holes in outer frame every approx. 500 mm for tie-down straps

Stake Pockets:
* 16 detachable stakes approx. 100/40 mm, usable length approx. 800 mm

Stake Pocket Recesses:
* Each side recessed with 8 stake pockets in the outer frame
* 4 rows of stake pockets transverse to the loading platform

Floor:
* Approx. 28 mm Z-hardwood floor embedded in the outer frame

Front Wall:
* Enclosed front wall
* Storage depot for 16 detachable stakes approx. 100/40 mm
* Front wall bolted to head frame

Equipment:
* 2 wheel chocks with brackets
* 2x PVC toolboxes, approx. 600/400/500 mm
* Bracket for revolving beacon at rear incl. lamp
* 2 LED reversing lights (at rear)
* 2 aluminium loading ramps, approx. 1,550 x
Credpfx Aowt Iylja Ish

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.