Çalışma platformlu yarı römork

ES-GE 3-Achs-Ballastauflieger

Durumu: yeni, toplam ağırlık: 45.000 kg, azami yük ağırlığı: 39.850 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment specification. Full specification available on request. Chassis: * Welded construction made from high-grade steel profiles with punched profile cross members * Designed for high point loads. Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide * Mounting bracket at front for customer-side installation of a support device, approx. 90 x 90 x 4 mm Coupling gear: * 2-inch kingpin (also suitable for 3.5) Ibsdpfx Abowx Dbpj Noc Underride guard: * According to EC standards, bolted version Side underrun protection: * According to EC standards Landing legs: * 24 t landing legs, single-sided operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle assemblies, brand of our choice, disc brakes approx. 430 x 45 mm * ABS * Centrally aligned wheel connection, 10 holes with ET 120 * Total air suspension lift approx. 200 mm, comprising lift approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent function, with RTR function * Switch for second driving height (+ approx. 50 mm) on the lift/lower device bracket * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start-up aid via push button in the cab (15-pin socket PIN12). Push button in the cab not included in scope of delivery Brake system: Brand of our choice * Dual-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Non-interchangeable coupling heads fixed to the front cross member, without connecting line to the truck Tyres: * 6x, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), ET 120 * Basic version of tyre pressure monitoring, connected to EBS CAN bus system * Tyre pressure display in cab (pre-installation by truck manufacturer) Mudguards: * According to EC standards, PVC mudguards (half-shells) over all axles * Mud flaps with anti-spray Load securing: * 8 pairs of hook plates welded into outer frame (lashing capacity approx. 3 t) * 6 pairs of lashing rings on the side in the outer frame, evenly distributed (lashing capacity approx. 10 t) * 13 pairs of lashing eyes (U-rings) in the outer frame (tested lashing capacity approx. 2.5 t per lashing point) Stanchion pockets/stanchions: * 5 pairs of stanchion pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stanchion pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stanchions made of galvanized square tube, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: * Bolted front wall, approx. 1,200 mm high, clad with approx. 5.5 m sheet metal Stanchion magazine: * Inside at the front wall, magazine for plug-in stanchions Floor: * Approx. 28 mm hardwood floor recessed in outer frame, with galvanized omega-steel profiles Lighting system: * According to EC standards, 24 Volt with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate illumination * 1x 15-pin and 2x 7-pin connectors on front cross member Equipment: * Wheel chock with double holders * Warning sign according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for rotating beacon at rear (incl. rotating