Çalışma platformlu römork

ES-GE Tandem-Anhänger Bordwände, CV, Rungen

You can find our entire stock of vehicles, available immediately or at short notice, on our website.

Excerpt from the equipment. Full specifications available upon request.

Chassis
* Steel welded construction consisting of welded longitudinal beams and inserted Z cross-members
* Closely spaced cross-members for high floor load capacity
* Ramp storage between longitudinal beams behind the axle assembly
* Two insertion compartments below the loading floor for one ramp each, with locking plate in the rear head frame

Front support
* Support winch with single-side operation

Drawbar
* Height-adjustable rigid drawbar with bolted towing eye approx. 40 mm according to DIN
* Height adjustable by approx. +/- 150 mm

Rear support
* Two adjustable drop-down supports

Running gear
* 2 x 7 t air suspension axle aggregates, SAF brand
* Drum brake approx. 300 x 150 mm
* 10-hole centrally mounted wheel connection for single tires
* Total air suspension travel approx. 180 mm, of which raising approx. 150 mm and lowering approx. 30 mm
* Control via hand lever with ratchet function

Tyres
* 4 x 285/70 R 19.5 - brand at our discretion
* On steel rims 8.25 x 19.5, brand at our discretion

Splash protection
* PVC splash guards in front of and behind the axles
* In accordance with EU regulations, with rear mud flaps

Cargo securing
* Securing rail for lashing straps in the outer frame every approx. 200 mm, pull force approx. 2.5 t
* 6 pairs of folding lashing rings evenly distributed, pull force approx. 8,000 daN
* Stake pockets for plug-in stanchions 80/50
* 3 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets transversely across the loading area, evenly distributed

Brake system
* Air brake system according to EU standards with EBS and coupling heads (red/yellow) on the coupling plate at the drawbar
* For connection to the towing vehicle: double coiled hoses with one red/yellow coupling head and one Duomatic coupling each
* Spring-loaded parking brake acting on one axle

Floor
* Approx. 28 mm Z-hardwood floor recessed into the outer frame
* Sheet metal cover in the wheel arch area
* Floor load capacity for forklift traffic up to approx. 5 t

Container locks:
* Container locks for 1 x 20 ft. container according to ISO 1496, EN 284 or EN 452 1
* Additional locks for 1 x 10 ft. container in the front according to ISO 1496, EN 284 or EN 452

Lighting
* Lighting system according to EU standards, 24 volts
* Multi-chamber tail lights, license plate lights, side marker lights and lane marker lights at the rear
* Connection plate at the drawbar including connection cable with 15-pin and 2 x 7-pin connectors

Accessories included
* 1 removable rotating beacon at the rear with continuous light registration
* Additional: 2 LED reversing lights at the rear on the lamp bracket, activated via reverse gear, with switch
Dcjdpfx Abexc Axxsvon
* Welded-on forklift bumpers on the sides and rear
* 1 x stainless steel toolbox each on left and right behind the axles
* 6 x 25-side panels (3 per side) and front/rear wall made of anodized aluminum hollow profiles, approx. 600 mm high
* Side panels foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm)
* Side panel/stanchion storage magazine in front at the bulkhead
* 1 additional mounting plate incl. parking sockets for air / electrics / EBS

Paintwork
* Chassis hot-dip galvanized
* Side panels RAL 9010 Pure White
* Hubs KTL Black
* Underride guard RAL 9010 White
* Rims RAL 9006 Sil

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.