Alçak şasi dorse

FAYMONVILLE MAX Trailer 3+5 Tiefbett (Baggerbett)

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Excerpt from the equipment specification. Complete equipment details available on request.

Gooseneck
* Hydraulically lift/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4.

3-Axle Compact Front Bogie
* Hook mounts at front and rear, length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm

Excavator Deck
* Telescopic excavator deck BB-A with drive-over bridge hooks at the front and pin-eye coupling at the rear
* Base width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm

5-Axle Rear Bogie
* Mechanical pin-eye coupling for mounting a lowbed at the front, end crossmember at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* 3-axle pendle axle

Front Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on front bogie: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J pendle axle

5-Axle Rear Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on rear bogie: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J

Paintwork
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Final coating with 2 coats of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with RAL System 841GL. Rims in silver-grey

Including Accessories
* Steel front wall, approx. 400 mm high
* Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish
* 3.5 kingpin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connectors on gooseneck
* BEKA-MAX central lubrication for one 3-axle bogie
* One 7-pin socket left and right at rear of the front bogie for warning panels
* Thread insert option (ø approx. 40 mm) every approx. 500 mm on the outer top chord of the excavator deck's outer tube for lashing rings (LC 16,000 daN)
* Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* The steel mattresses can be inserted in 2 positions to provide a lowered loading area. Please refer to the respective load diagram for permissible payload depending on width extension
* Steel mattresses with rubber flooring, approx. 12 mm thick
* One 7-pin socket left and right, front and rear on rear bogie for warning panels
* BEKA-MAX central lubrication for one 5-axle bogie
* Socket on rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right
Caedpfeuvbdtsx Acwea
*

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.