Alçak şasi dorse

FAYMONVILLE Megamax Tiefbett 2x10 t, Bolzen-Laschen-Kupplung

You can find our complete range of immediately and short-term available vehicles on our website.

Fpsdpfx Adjv Sw E Ajmeb
Excerpt from the equipment. Full equipment details available on request.

Gooseneck
* Gooseneck in SNT design for optimized deck length
* Length approx. 3,750 mm; gooseneck hydraulically liftable/lowerable and detachable
* Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2

Tanker deck
* Low bed designed as extendable tanker deck in SUPER LOW design
* Length approx. 6,850 mm
* with mechanical locking
* Supply lines are protected in extendable beams and automatically adjust to the respective low bed length

Rear running gear
* In short version with closed outer frame and checker plate cover
* Running gear with excavator trough, this is closed in the rear section to house air tanks

Axles
* BPW axles and suspension, all axles hydro-mechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve

Tyres
* GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F)

Braking system
* Make: WABCO. EBS-E according to EU regulations, WITHOUT connection cable to the tractor unit

Paintwork
* 6-coat treatment
* Complete steel structure shot-blasted after welding
* 1 layer zinc-based primer
* 1 layer adhesion primer. Final coating with 2 layers of 2K (acrylic) single-color paint, followed by cavity sealing with special wax

Trailer color
* RAL 3002 Carmine Red
* Rim color: Silver-grey
* Sidewall color: Natural Aluminum

Accessories included
* Plug-in steel front wall, approx. 400 mm high
* 3 kW electro-hydraulic unit for hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit
* Mounting adapter for 1 spare wheel in front of the gooseneck’s front wall
* Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN)
* 2-inch king pin
* Hydraulic spreader beam for supporting the gooseneck on the tractor or a dolly
* Air connection with air gun on the gooseneck
* 1 pair of steel ramps with climbing strips and mounting bolts to bridge the low bed’s mounting hooks
* 1 lashing ring each left and right on the front cross member (LC 10,000 daN)
* On the outer beams of the loading area, provisions for removable load floor
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the inner beams of the loading area
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the outer beams of the loading area (LC 10,000 daN)
* Cutouts in the upper chord of the outer beams above the lashing rings
* Mechanical bolt-tab coupling from the low bed to the running gear, for deck replacement or installation of extension beams. With electro-pneumatic-hydraulic couplers
* Outer beams of the low bed coated with anti-slip sand layer
* 2nd driving height for upper driving position, max. ± 50 mm from normal driving position, without installation of controls from the tractor unit
* 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN)
* Chamfered front and rear a

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.