Alçak şasi dorse

FAYMONVILLE Multimax Satteltieflader (2+2) - nachlaufgelenkt

Durumu: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Chjdpfx Aexc Axrod Nod Excerpt from the equipment. Complete equipment list available upon request. Gooseneck * Gooseneck in SNT design for optimized load floor length, approx. 3,700 mm length * Rear bevel approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except for hydraulic winches) * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat-mounted lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood flooring over the gooseneck * 2-inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stake pockets recessed into the gooseneck for plug-in stakes approx. 100 x 50 mm (inside on chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm in length with rear bevel approx. 500 mm x 10° * Recess in the platform and extending into the bevel for accommodating the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood floor approx. 50 mm thick on the platform, interrupted between the axles * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube * Platform locking with conically welded locking profiles at approx. 250 mm intervals * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, fold-out lashing rings in the external frame of the platform (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between the 1st and 2nd axles * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also usable as widening boards * Hardwood covering on the platform's bevel * Painted sand coating on the platform's outer frame and on the platform's tread plates Chassis * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle steered with trailing arm * 3rd axle with electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with starting aid * 2 axle-load gauges mounted on the left side including axle-load diagram Tires * 235/75 R 17.5 3PMSF twin tires * TPMS tire pressure monitoring system per ECE R 141 Paintwork * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M: one pair of two-piece steel ramps approx. 4,350 mm long and 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Each ramp can be hydraulically moved approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform's bevel * Ramp with hardwood covering Brake system WABCO EBS-E in accordance with EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED