CNC işleme merkezi

FIRST MCV 300

Technical Data:

TABLE
Table surface: 700 x 350 mm
Table height above floor: 835 mm
T-slots: 16 mm x 63.5 mm / 4 slots
Maximum workpiece weight: 350 kg

Travel Paths:
X-axis: 610 mm
Y-axis: 355 mm
Z-axis: 460 mm
Distance from spindle center to column face: 415 mm
Distance spindle nose / table: min. 70 mm / max. 530 mm

SPINDLE
Gbedpfozcazxsx Ai Don
Spindle taper: SK 40 / DIN 69871 (drawbar: DIN 69872)
Infinitely variable spindle speeds: 10,000 rpm
Spindle drive motor Siemens: 7.5 / 11.0 kW

AXIS FEED DRIVES, Digital Feed Motors, Direct Drives
All 3 feed motors are directly mounted. Drive without timing belts!
Ball screw manufacturer: HiWiN

X-Axis
Feed motor: Siemens
Ball screw: Ø 32 x 10; C5

Y-Axis
Feed motor: Siemens
Ball screw: Ø 32 x 10; C5

Z-Axis
Feed motor: Siemens
Ball screw: Ø 32 x 10; C5

FEED RATES:
Rapid traverse: 20 m/min for X and Y axes, 18 m/min for Z axis
Feed rates: X - Y: 1-10 m/min

ACCURACY
Positioning (within 300 mm): +/- 0.005 mm
Repeatability: +/- 0.004 mm

TOOL CHANGER
Tool holder: DIN 69871 with drawbar DIN 69872
Standard changer system: disc-type tool changer without arm
Capacity: 10 tools
Tool change time: max. approx. 20 seconds
Maximum tool weight: 7.0 kg
Maximum tool diameter: 93 (120) mm
Maximum tool length: 300 mm

AIR SUPPLY
Required pressure: 6.5 bar
Air consumption: 300 l/min

Standard accessories:
- CNC control SIEMENS 828 D with "SHOPMILL" operator interface
- Wide selection of milling and drilling cycles
- Machining cycle for contour pockets/contour bosses with islands, etc.
- Graphic functions
- Tool management
- User CF card slot on control panel front
- RS 232 C interface
- USB interface on control panel front
- RCS-Commander: front-side ETHERNET interface for notebook PC
- 100 Mbit/sec TCP/IP ETHERNET interface for company network integration
- Portable electronic handwheel
- Rigid tapping (thread cutting without compensating chuck)
- Spindle orientation
- Color display (LCD) 10.4"
- Manual operation on all 3 axes
- Semi-automatic with manual feed control
- Automatic with cycle function, CNC operation without CNC knowledge required
- ISO programming
- Linking of cycle programs and ISO programs
- Large memory for created programs
- Full enclosure (CE)
- Heat exchanger for the electrical cabinet
- Automatic tool clamping
- Automatic tool changer with 10 tools
- Spindle air blast
- Coolant system incl. oil separator
- Automatic central lubrication
- Work light
- Electronic handwheel for all 3 axes
- CE compliance, EMC filter
- 24 months full warranty Siemens "RSV"
- Two-tone paint: white RAL 7035, black RAL 7021
- Increase of spindle speed to 10,000 rpm
- Chip conveyor with hinged belt design
- Coolant supply through the milling spindle (internal cooling) with 20 bar high-pressure pump = 55 l/min, separate tank
- Automatic tool changer without arm with 16 tools
- Prepared for 4th axis

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.