Brandalı açık yarı römork

FLIEGL Fliegl SZS 270 Mega Plateau Auflieger

Attention: The images are archival photos! The vehicle may currently be in use.

Weights and Dimensions:
Gross weight: 27,000 kg
Payload approx.: 22,200 kg
Axle load: 16,000 kg
Stated fifth wheel load: 11,000 kg
Unladen weight approx.: 4,800 kg +/- manufacturing tolerance

Overall length approx.: 13,850 mm
Overall width max.: 2,550 mm
Overall height approx.: 2,245 mm
Platform length approx.: 13,650 mm
Platform width approx.: 2,480 mm
Coupling height approx.: 950 mm
King pin mounting dimension approx.: 1,680 mm
Front corner measurement approx.: 2,040 mm

Chassis – Semi-Trailer for Freight Forwarding
Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin
13 pairs of lashing rings integrated into the outer frame, each rated at 2.5 t
Outer frame with load-lock profile for securing straps
24 t two-speed landing gear, single-sided operation, with straight lower section, without load compensation
Wheel chocks with holders
Aluminium side underrun protection
Steel underrun guard
Quarter circle mudguards
Document box on the front wall, left side (slightly angled)
Hnjdpfxoy Sk Rqo Acdjl

Axles & Suspension
BPW disc brake axles
Air suspension

Braking System
2-line compressed air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, without connecting line
EBS electronic brake system with EBS socket at the front, without connection cable
Please note: The trailer must only be towed by tractors that ensure the effectiveness of the ABS!
With raise & lower valve
Vehicle driving stability system

Wheels and Tires
385/55 R19.5”, brand according to manufacturer's choice
Steel rims, factory silver

Electrics
24 Volt, multi-chamber lights (3 sets of old Hella lamps still at the factory – install if possible), yellow LED side lights mounted as far inward as possible
2 white position lights at the front, with 12 mm round iron welded across as protection
2 white/red track marker lights at the rear
2 x 7-pin non-interchangeable sockets at the front, without connection cable

Floor
Phenolic resin-coated plywood, approx. 30 mm thick, with cross joints provided with omega inserts, mounted on longitudinal subframes for high point load capacity, suitable for forklift axle load up to max. 7,100 kg
Note: Floor warping due to weather conditions possible!

Front Wall & Corner Posts
Approx. 1,200 mm high, corner posts steel, high-volume design

Registration / Plates
Country of registration: Germany
With Dekra inspection and certificate
24/7 service hotline
Prepared for single-row license plate holder
Warning sign in accordance with ECE - 70
Outline marking with reflective strips as per ECE R 048, white at the sides and red at the rear

Paintwork
Frame: RAL 3002 carmine red
Support feet: black coated
Front wall: RAL 3002 carmine red

Attention: The images are archival photos! The vehicle may currently be in use.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.