Yarı römork

GOLDHOFER STHP 8 (3+5)/GG 219 to/Pendelachsen/ausziehbar

Durumu: kullanılmış, azami yük ağırlığı: 175.620 kg, toplam ağırlık: 219.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2002, Donanım: ABS, STHP 8 (3 + 5) 8 units hydraulic BWP pendulum axle assemblies with radio remote control. Permissible total weight: 219,000 kg (technically possible) Payload: 175,620 kg (technically possible) Hydraulically suspended, 8-axle steerable Goldhofer lowbed heavy-duty trailer Type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator lowbed up to 5 meters in length, with 4 wheel recesses and ABS, technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st module: Hydraulic universal gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, with drive-over loading bridges. Unladen weight: approx. 5,900 kg Permissible fifth wheel load at the front: 35,000 kg Length: approx. 4.10 m Fifth wheel height: approx. 1.30 m King pin: 3.5" pin Removable aluminium side walls Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty running gear module Initial registration: 14.11.2001 As single module, technically permissible total weight: 108,000 kg, technically permissible axle load: 36,000 kg at 5 km/h. Unladen weight: 10,350 kg As single module, technically permissible payload up to 97,650 kg at 5 km/h. 8-fold hydraulic pendulum axles, 24 wheels with 215/75/R17.5 tyres Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into the chassis: hydromechanical 2-circuit all-wheel forced steering with maximum axle steering angle of 60°, with integrated hydraulic oil tank Front and rear optimized bolt/lug coupling for longitudinal combinations Single-tire pendulum axle assemblies with total 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technically possible axle load 34 t at 5 km/h 3rd module: Extendable lowbed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions: approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height: 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with access module in head area Construction height in wheel recess area: approx. 150 mm Load capacity up to 80 t in the lowbed and 175.6 t in the complete STHP8 (3+5) module possible. Unladen weight: 11,900 kg Hydraulic pin/lug coupling with claw coupling adapter, front and rear 4th module: Goldhofer THP/ET5 5-axle heavy-duty running gear module Initial registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technically permissible payload up to 100,800 kg. Single-tire hydraulic pendulum axle assemblies with 4 wheels per axle line – 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different towing combinations are possible! Payloads vary depending on the towing configuration. A current manufacturer’s certificate from Goldhofer is available for the special lowbed combination. Blsdpfxoxcdf He Ad Nsp The lowbed can be tested at our facility. Price NET plus 19% VAT. All information provided without guarantee. Subject to errors a

Durumu: kullanılmış, azami yük ağırlığı: 175.620 kg, toplam ağırlık: 219.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2002, Donanım: ABS, STHP 8 (3 + 5) 8 units hydraulic BWP pendulum axle assemblies with radio remote control. Permissible total weight: 219,000 kg (technically possible) Payload: 175,620 kg (technically possible) Hydraulically suspended, 8-axle steerable Goldhofer lowbed heavy-duty trailer Type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator lowbed up to 5 meters in length, with 4 wheel recesses and ABS, technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st module: Hydraulic universal gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, with drive-over loading bridges. Unladen weight: approx. 5,900 kg Permissible fifth wheel load at the front: 35,000 kg Length: approx. 4.10 m Fifth wheel height: approx. 1.30 m King pin: 3.5" pin Removable aluminium side walls Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty running gear module Initial registration: 14.11.2001 As single module, technically permissible total weight: 108,000 kg, technically permissible axle load: 36,000 kg at 5 km/h. Bjdpfx Aoxcdg Dsd Nolp Unladen weight: 10,350 kg As single module, technically permissible payload up to 97,650 kg at 5 km/h. 8-fold hydraulic pendulum axles, 24 wheels with 215/75/R17.5 tyres Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into the chassis: hydromechanical 2-circuit all-wheel forced steering with maximum axle steering angle of 60°, with integrated hydraulic oil tank Front and rear optimized bolt/lug coupling for longitudinal combinations Single-tire pendulum axle assemblies with total 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technically possible axle load 34 t at 5 km/h 3rd module: Extendable lowbed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions: approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height: 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with access module in head area Construction height in wheel recess area: approx. 150 mm Load capacity up to 80 t in the lowbed and 175.6 t in the complete STHP8 (3+5) module possible. Unladen weight: 11,900 kg Hydraulic pin/lug coupling with claw coupling adapter, front and rear 4th module: Goldhofer THP/ET5 5-axle heavy-duty running gear module Initial registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technically permissible payload up to 100,800 kg. Single-tire hydraulic pendulum axle assemblies with 4 wheels per axle line – 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different towing combinations are possible! Payloads vary depending on the towing configuration. A current manufacturer’s certificate from Goldhofer is available for the special lowbed combination. The lowbed can be tested at our facility. Price NET plus 19% VAT. All information provided without guarantee. Subject to errors a

Durumu: kullanılmış, azami yük ağırlığı: 175.620 kg, toplam ağırlık: 219.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2002, Donanım: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with radio remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator low-bed up to 5 meters, with 4 wheel recesses with ABS, technical payload up to 175,620 kg possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: hydraulic universal gooseneck type STH / ST Year of construction: 2002 Can be combined with heavy-duty module bogies, with drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth-wheel load at front: 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Bledpfsxcdgqox Ad Njp Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14/11/2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg possible at 5 km/h. Unladen weight: 10,350 kg Technical payload as a single module up to 97,650 kg at 5 km/h possible. 8 hydraulic pendle axles, 24x wheels with 215/75/R17.5 tyres Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated hydromechanical 2-circuit all-wheel forced steering with a maximum steering angle of 60° for the axle units and integrated hydraulic oil tank Front and rear optimized pin-eye couplings for longitudinal combinations Single-tire pendle axle units, total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering on all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h possible 3rd module: Extendable low-bed heavy-duty module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, loading height 0.40 m Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with ramp module in the head section Build height in the wheel recess area approx. 150 mm Load up to 80 t in the low-bed and up to 175.6 t in complete STHP8 (3+5) module possible Unladen weight 11,900 kg Front and rear hydraulic pin-eye coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04/01/2002 Technical gross weight: 115,000 kg, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tire hydraulic pendle axle units with 4 wheels per axle line, 20x with 285/70 R 19.5 tyres Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Note: Up to 3 different tractor/trailer combinations possible with the 4 heavy-duty modules! Payloads vary depending on the tractor combination used. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed trailer can be demonstrated at our premises. Net price plus 19% VAT. All information subject to change/errors and prior sale. Internal vehicle number: 2285 Complete advert also available in English.

Durumu: kullanılmış, azami yük ağırlığı: 175.620 kg, toplam ağırlık: 219.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2002, Donanım: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with radio remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator low-bed up to 5 meters, with 4 wheel recesses with ABS, technical payload up to 175,620 kg possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: hydraulic universal gooseneck type STH / ST Year of construction: 2002 Can be combined with heavy-duty module bogies, with drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth-wheel load at front: 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically adjustable Bledpfx Aoxcdfged Njp 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14/11/2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg possible at 5 km/h. Unladen weight: 10,350 kg Technical payload as a single module up to 97,650 kg at 5 km/h possible. 8 hydraulic pendle axles, 24x wheels with 215/75/R17.5 tyres Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated hydromechanical 2-circuit all-wheel forced steering with a maximum steering angle of 60° for the axle units and integrated hydraulic oil tank Front and rear optimized pin-eye couplings for longitudinal combinations Single-tire pendle axle units, total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering on all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h possible 3rd module: Extendable low-bed heavy-duty module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, loading height 0.40 m Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with ramp module in the head section Build height in the wheel recess area approx. 150 mm Load up to 80 t in the low-bed and up to 175.6 t in complete STHP8 (3+5) module possible Unladen weight 11,900 kg Front and rear hydraulic pin-eye coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04/01/2002 Technical gross weight: 115,000 kg, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tire hydraulic pendle axle units with 4 wheels per axle line, 20x with 285/70 R 19.5 tyres Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Note: Up to 3 different tractor/trailer combinations possible with the 4 heavy-duty modules! Payloads vary depending on the tractor combination used. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed trailer can be demonstrated at our premises. Net price plus 19% VAT. All information subject to change/errors and prior sale. Internal vehicle number: 2285 Complete advert also available in English.

Durumu: kullanılmış, azami yük ağırlığı: 175.620 kg, toplam ağırlık: 219.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2002, Donanım: ABS, STHP 8 (3 + 5) 8 units hydraulic BWP pendulum axle assemblies with radio remote control. Permissible total weight: 219,000 kg (technically possible) Payload: 175,620 kg (technically possible) Hydraulically suspended, 8-axle steerable Goldhofer lowbed heavy-duty trailer Type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator lowbed up to 5 meters in length, with 4 wheel recesses and ABS, technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st module: Hydraulic universal gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, with drive-over loading bridges. Unladen weight: approx. 5,900 kg Permissible fifth wheel load at the front: 35,000 kg Length: approx. 4.10 m Fifth wheel height: approx. 1.30 m King pin: 3.5" pin Removable aluminium side walls Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty running gear module Initial registration: 14.11.2001 As single module, technically permissible total weight: 108,000 kg, technically permissible axle load: 36,000 kg at 5 km/h. Unladen weight: 10,350 kg As single module, technically permissible payload up to 97,650 kg at 5 km/h. 8-fold hydraulic pendulum axles, 24 wheels with 215/75/R17.5 tyres Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into the chassis: hydromechanical 2-circuit all-wheel forced steering with maximum axle steering angle of 60°, with integrated hydraulic oil tank Front and rear optimized bolt/lug coupling for longitudinal combinations Single-tire pendulum axle assemblies with total 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technically possible axle load 34 t at 5 km/h 3rd module: Extendable lowbed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions: approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height: 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with access module in head area Construction height in wheel recess area: approx. 150 mm Load capacity up to 80 t in the lowbed and 175.6 t in the complete STHP8 (3+5) module possible. Unladen weight: 11,900 kg Hydraulic pin/lug coupling with claw coupling adapter, front and rear 4th module: Goldhofer THP/ET5 5-axle heavy-duty running gear module Bsdpoxcdfaefx Ad Nelp Initial registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technically permissible payload up to 100,800 kg. Single-tire hydraulic pendulum axle assemblies with 4 wheels per axle line – 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different towing combinations are possible! Payloads vary depending on the towing configuration. A current manufacturer’s certificate from Goldhofer is available for the special lowbed combination. The lowbed can be tested at our facility. Price NET plus 19% VAT. All information provided without guarantee. Subject to errors a