Kenar bantlama makinesi

Hebrock AKV 3005 DK -F airtronic

with jointing milling unit including DIA tools, jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station radius R 2.5 mm

Technical description:

- Hot-melt glue application to the workpiece for edging material up to 3 mm
- 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit
- Maintenance-free, coated glue pot
- HF end-trimming station (16,000 rpm) for front and rear edge excess
- HF milling station (16,000 rpm) with replaceable insert tool (combined version) and fine adjustment accessible from the operator side
- Free spaces for additional processing units (Hebrock system)
- Feed speed approx. 10 m/min
- Adjustable cutting depth for trimming saw
- Signal lamp for sequential workpiece feed
- Robust chain drive
- Ergonomically positioned operator panel
- Double roller top pressure beam
- Aggregate viewing windows accessible from the rear and operator side
- PLC control system including touchscreen

Technical Data:
- Feed speed 10 m/min
- Panel thickness 8 – 40 mm
- Weight: depending on equipment approx. 1400 kg
- Dimensions (L x W x H): 5000 x 1445 x 1600 mm

Airtronic for machines up to 8 mm edge thickness, 1 pc

Technical Data:
- Edge thickness 1.2 mm – 3.0 mm possible
Ledpfx Asyfp N Dsa Ierh
- Maximum panel thickness 25 mm
- Feed speed 7–10 m/min depending on edge material
- Ready for operation in 3 min
- Air consumption approx. 800 l/min for the complete machine
- Power supply max. 32 A / 16 kW for complete machine; higher power connection required for machines with groove saw
- Extraction as before
- PLC control mandatory

Upgrade to 8 mm edge thickness, 1 pc, up to max. 40 mm workpiece thickness

Including:
- Pneumatic saw adjustment
- Separate pneumatic milling adjustment (1 pc) controllable from the operator panel (straight/radius)
- Buffing station (1 pc)
- Corner rounding cutter (1 pc) incl. combined tooling and pneumatic setting for chamfer/radius, max. workpiece thickness 40 mm
- Minimum workpiece length 300 mm
- Radius R 2.0 mm
- Radius scraper blade (1 pc) incl. pneumatic lift device, radius R 2.0 mm
- Flat scraper blade (1 pc) with pneumatic activation
- Glue pot quick-change system in preparation (1 pc), without second glue pot, including capability for processing PU adhesives with the machine, without adhesive outlet device downward
- Special cleaning system PU adhesive run-off downwards (1 pc)

60 mm panel thickness for machine with jointing unit (1 pc)
- Maximum workpiece thickness with jointing unit: 60 mm
- Jointing thickness at 40 mm – 60 mm workpiece thickness up to 2 mm

Special infeed fence for overlaid panels: 1 pc, 16 mm and 19 mm thickness, max. excess overlay 8 mm

Separate extraction for jointing unit: 1 pc, directly on jointing unit, vertical upwards, d=80 mm for optimal suction, strongly recommended from model AKV 3005 DK-F onward

Ball bearing for corner rounding cutter 24.1 mm (1 pc)
Ball bearing for corner rounding cutter 24.2 mm (1 pc)

Nesting for combined milling unit (1 pc)
- For processing workpieces with cup hinge borings, possible only on workpiece underside
Nesting for radius scraper blade unit (1 pc)
- For processing workpieces with cup hinge borings, possible only on workpiece underside

Separating agent spray device (1 pc)
Cleaning agent spray device (1 pc): for easier removal of glue residues
Antistatic spray device (1 pc): mandatory for airtronic; antistatic coolant is sprayed on the inside edges of the excess before the combined milling sta

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.