çok amaçlı yüzey taşlama makinesi

HEESEMANN MFA 6

Durumu: kullanılmış, Üretim yılı: 2001, Abrasive belt length 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: cross-belt design 1st unit: cross-belt with sanding shoe 1st unit: electronically segmented sanding shoe Abrasive belt width 1st unit: 150 x 4800 mm Drive 1st unit: kW Hsdpfx Adoxzi S Nspsni 2nd unit: longitudinal roller 2nd unit: steel calibrating roller Abrasive belt length 2nd unit: 2150 mm Abrasive belt width 2nd unit: 1350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit 3rd roller design: electronic segmented pressure beam SDS system Sanding shoe 3rd unit: electronically segmented, 32 mm width Abrasive belt length 3rd unit: 2150 mm Abrasive belt width 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor belt: Yes Feed speed, fixed: stepless, 5 - 15 m/min Control: touchscreen control Elect./pneumatic belt oscillation: electric Infeed height: variable (lower table adjustable) Table lift: electro-motoric Table height display: digital Working height or feed table height: 880 mm Location: Nattheim

Durumu: iyi (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: tamamen fonksiyonel, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Wear-resistant brake unit, automatic length adjustment Dust extraction system regulated in accordance with workpiece detection, reverse belt direction, automatic abrasive grain compensation via computer Belt speeds: 1.0 – 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 – 18 m/s Drive: 15 kW Includes stepless sanding speed adjustment via electronic frequency inverter, with double purge hole configuration for dust extraction. Wear-resistant brake unit, automatic length adjustment for varying abrasive belt edge lengths, dust extraction system controlled according to workpiece (can be disabled), reverse belt direction. Hnodpfxjx Rdn Tj Adpji 2 pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable pressure of individual pressure elements for single or multi-workpiece feed. Spacing: 32 mm. Compensation for workpiece tolerances up to 2 mm by maintenance-free pressure magnets. Working width as well as the start and end of sanding for the pressure beam are set electronically. Pressure elements are activated by electro-lifting magnets, which continuously adjust the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees a consistently even contact pressure according to pad coverage on the workpiece. The risk of sanding through on edges is virtually eliminated due to this dynamic and continuous pressure force regulation.

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 2007.10.191, taşlama genişliği: 1.350 mm, taşlama bandı uzunluğu: 4.800 mm, iş parçası yüksekliği (maks.): 150 mm, taşlama bant genişliği: 1.400 mm, Automatic Grinding Machine + Dedusting Unit TECHNICAL DETAILS Grinding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 – 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency inverter 7.5 kW Feed speed: 3 – 15 m/min Workpiece vacuum clamping unit drive: 7.5 kW Sanding units: 3 x cross, 1 x longitudinal, 1 x brush Cross and Longitudinal Sanding Units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt for cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed (longitudinal): 1.8 – 16 m/s Drive power (longitudinal): 15 kW Pressure lamella belt (longitudinal): 1,900 x 1,380 mm Brush Unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air Requirements Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Air requirement, brushing unit: 18.0 m³/min Air requirement, conveyor belt cleaning: 13.5 m³/min Air exhaust, workpiece vacuum clamping unit: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main Machine Dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dedusting Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air velocity: 20 m/s Air requirement: 30.5 m³/min Conveyor bed drive: 1.1 kW / frequency inverter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Hnodpeyg Exqefx Adpoi Height adjustment drive: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dedusting machine EA 8 - Workpiece vacuum clamping unit - Multiple cross and longitudinal sanding units - Brush unit

Durumu: kullanılmış, Üretim yılı: 2006, 2 bantlı alt ayırıcı RR 1300 2 alt silindir Hnjdpoycxwfofx Adpei 2 bantlı üst ayırıcı RR 1300 2 üst silindir

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2006, Fonksiyonellik: tamamen fonksiyonel, toplam genişlik: 2.200 mm, toplam yükseklik: 2.400 mm, toplam uzunluk: 2.500 mm, çalışma genişliği: 1.300 mm, toplam ağırlık: 7.500 kg, çalışma yüksekliği: 900 mm, masa yüksekliği: 900 mm, güç: 59 kW (80,22 bg), yükseklik ayar tipi: elektrikli, taşlama bant hızı: 1.400 mm/s, giriş akımı türü: trifaze, konveyör bant hızı: 20 mm/s, taşlama bandı uzunluğu: 2.640 mm, basınçlı hava bağlantısı: 6 bar, masa yüksekliği ayarı: 120 mm, ekstraksiyon meme çapı: 200 mm, besleme motoru gücü: 4.000 W, Üretim hattı için alt kalibre zımpara makinesi, çalışma genişliği: 1300 mm, donanım: 1 çalışma grubu: çelik silindir, motor: 37 kW; 1 çalışma grubu: silindir, motor: 22 kW; toz temizleme fırçası. Hodpfx Aswy Nndodponi