Universal test makinesi / Çekme test makinesi

Hegewald & Peschke Inspekt Table Blur 5

Universal Testing Machine Inspekt Table Blue 5kN

Rjdsyyu I Njpfx Ac Esr
Mechanical Construction:

2 backlash-free ball screws, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm
1 test area up to nominal load:
Test area width: 420 mm
Max. test stroke without testing tools, adapters, and KMZ: 1025 mm

Travel Speeds:

Testing speed 0.0015 – 1000 mm/min at full load
Return speed 1000 mm/min

Force Measurement:

Measurement range: within 0.8 – 100% of nominal load, Class 1 (optionally Class 0.5)
(+/- 1 % of the displayed value, as per DIN EN ISO 7500-1)
Force measurement resolution: +/-180,000 digits with 20ms integration time

The machine is supplied with a factory test certificate. If factory or DKD calibration at the installation site is required by the customer, this must be quoted separately.

Crosshead Travel Measurement:

Incremental square-wave input with encoder monitoring, storage of crosshead position
Crosshead travel resolution: 1 µm

Dimensions (WxDxH) / Weights:

Load frame: 685 mm x 550 mm x 1420 mm / 100 kg - Controller mounted on the load frame

Standard Functions:

Force, displacement, and strain control
Overload protection, automatic force calibration,
Specimen fracture detector, return function,
Setup operation via control panel with display (force, displacement)

Data Processing:

USB 2.0 interface or LAN,

Data transfer rate to PC: 50 Hz (standard), optionally higher data acquisition frequency via special software module
Internal data processing rate: 2 ms
Optional: up to 2 free slots for expansion cards (1-channel analog or 2-channel digital cards) for additional sensors available


115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% humidity
Required options for operation: load cell, grips, PC (current standard, OS 8-10-11, testing software)


Load Cell 5000 N
Measurement range: 5–5000 N tension and compression, with nominal 2 mV/V
Output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%,
with 1.5 m connection cable, incl. calibration certificate.
Incl. Extensometer MFX 200

The MFX 200-B extensometer, due to its robust design and high measuring accuracy, is suitable for nearly all specimens starting from an initial gauge length of 10 mm. All strains can be recorded, from the elastic modulus up to specimen fracture. It can be used without restriction in both the lower and upper test areas. In combination with the MFQ-A, r-value and n-value measurement in sheet metals is also possible. Two different measuring systems are available, which differ in the measuring signal and further technical data (see technical documentation).

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.