Kısaltma ve Uzunluk Taşlama Makinesi LY300

Herzog LY300

Koşul: ikinci el, Üretim yılı: 2003, Fonksiyonellik: tamamen fonksiyonel, toplam genişlik: 360 mm, toplam uzunluk: 820 mm, toplam yükseklik: 500 mm, giriş akımı türü: Klima, iş parçası çapı (maks.): 25 mm, toplam ağırlık: 92 kg, giriş voltajı: 400 V, This LY300 cross and longitudinal grinding machine is used but has only been operated sporadically. The condition is very good; only paint damage and a scratched machine cover indicate the machine's age. From a safety perspective, the machine is equipped with a cover switch that automatically shuts down the machine as soon as the cover is opened. A restart interlock prevents unintentional start-up. For the machining of short workpieces, the clamping handle (included) can be used with this machine. We can also offer additional consumables such as cut-off and cup wheels. Application: Bar-shaped workpieces can be cut to length and ground flat in a single operation. Ideally suited for the production of ejector pins. The machine features two parallel grinding spindles: one for cut-off operations and one for face grinding to final dimensions. The desired workpiece length can be set to an accuracy of 0.01 mm using the integrated scale. Workpiece length without clamping handle: 54 - 300 mm Workpiece diameter: Ø1-25 mm Workpiece length with clamping handle (included accessory): 12.5 - 60 mm Workpiece diameter: Ø1-10 mm Ejector pins with cylindrical head: max. size 6 Max. workpiece oversize before machining: 195 mm Length tolerance: +/-0.01 mm Squareness: +/-0.01 mm Weight: 92 kg Dimensions without scale (W x D x H): 430 x 360 x 500 mm Dimensions with scale (W x D x H): 820 x 360 x 500 mm Height with open cover: 950 mm Cut-off wheel, non-woven: SGA60P6BR1, Ø180x1xØ31.75 mm Cup wheel: PA46, Ø100x50x10xØ20 mm Nsdpfsxwp A Hsx Aiqsla Location: Austria / Vienna Included accessories: • 1 pc. cut-off wheel SGA60P6BR1 with flange, mounted • 1 pc. cup wheel PA46 with flange, mounted • 1 pc. dressing diamond, mounted • 2 pcs. Y-face spanner wrenches • 1 pc. pin spanner 6 mm • 1 pc. scale 300 mm • 1 pc. micrometer screw with scale sleeve • 1 pc. lever • 1 pc. operating manual, German Operating procedure: Open the prism clamp: move the lever in the center to the right and insert the workpiece Close the prism clamp: move the lever to the left Cutting: move the lever up to the left Face grinding: move the lever down to the left Open the prism clamp: move the lever to the center and to the right; remove the finished workpiece. The grinding wheel can be adjusted and dressed at any time without changing the pre-set dimension.

Koşul: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, garanti süresi: 6 aylar, toplam genişlik: 360 mm, toplam uzunluk: 1.020 mm, toplam yükseklik: 500 mm, giriş akımı türü: Klima, iş parçası çapı (maks.): 25 mm, toplam ağırlık: 92 kg, giriş voltajı: 400 V, Clamping, separating, and face grinding in a single action This machine features two parallel grinding spindles: one for parting and one for precision face grinding to final dimensions. The required workpiece length can be precisely set to 0.01 mm accuracy using the scale. Prism clamp open: Move the central lever to the right and insert the workpiece Prism clamp close: Move the lever to the left Separation: Move the left lever upwards Finishing: Move the left lever downwards Prism clamp open: Move the lever to the center and right to remove the finished workpiece. The grinding wheel can be adjusted and dressed at any time without affecting the preset dimension. Equipped with motor protection, cover switch, and restart protection Operation without clamping handle: The machine is supplied with two stop rulers (300 & 600 mm): Maximum finished workpiece length: 300 mm or 600 mm Minimum finished workpiece length: 54 mm Workpiece diameter: Ø1–25 mm Operation with clamping handle (not included in accessories): Maximum finished workpiece length: 60 mm Minimum finished workpiece length: 12.5 mm Workpiece diameter: Ø1–10 mm Ejector with cylindrical head: max. size 6 Maximum raw workpiece length before machining: 195 mm Length tolerance: +/-0.01 mm Squareness: +/-0.01 mm Weight: 92 kg Dimensions without scale (W×D×H): 430×360×500 mm Dimensions with scale (W×D×H): 1020×360×500 mm Height with open cover: 950 mm Cutting disc, fabricless: SGA60P6BR1, Ø180×1×Ø31.75 mm Cup wheel: PA46, Ø100×50×10×Ø20 mm Location: Austria / Vienna Nljdpfxjid Iymo Aiqja Condition: New, ex-stock machine, 6 months guarantee. Supplied with the following accessories: • 1 pc. cutting disc SGA60P6BR1 with flange, pre-mounted • 1 pc. cup wheel PA46 with flange, pre-mounted • 1 pc. dressing diamond, pre-mounted • 1 pc. belt, pre-mounted • 2 pcs. Y-front face spanners • 1 pc. each hex key 3 mm, 5 mm, 3/16'' • 1 pc. pin key 6 mm • 1 pc. scale 300 mm • 1 pc. scale 600 mm • 1 pc. micrometer screw with scale sleeve • 1 pc. cleaning brush • 1 pc. lever • 1 pc. user manual, German • 1 pc. wooden transport box