Ölçüm mikroskobu, çok sensörlü ölçüm makinesi

Hexagon Metrology Optiv 442 // PCDMIS (ex works)

Durum: mükemmel (kullanılmış), Üretim yılı: 2022, çalışma saatleri: 7.800 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Puma 2600, arabada tur dönme çapı: 630 mm, torna boyu: 1.245 mm, torna çapı: 376 mm, iş mili deliği: 102 mm, maksimum mil hızı: 2.800 dev/dak, mil motoru gücü: 26 W, giriş akımı türü: trifaze, kontrolör üreticisi: FANUC, milling sayısı: 2, iş mili çalışma saatleri: 7.800 h, takım magazinindeki yuva sayısı: 12, Donanım: talaş konveyörü, For sale: turning center with sub-spindle and Y-axis. Machine is in perfect condition, purchased new in mid-2023, and is still in operation. It has logged just under 8,000 hours and is machining parts significantly below its technical capacity. Maintained exclusively by the authorized distributor. Adapted for robotic integration: equipped with autodoor and output signals for communication. Comes with a parts conveyor and oil mist filter. NOTE: The offer does not include the robot – sale and implementation support for a robot are available upon separate quotation. TECHNICAL DATA as per manufacturer's specification: 1) Capacity Swing over bed: 680 mm Swing over cross-slide: 630 mm Max turning diameter: 376 mm Recommended turning diameter: 315 mm Max turning length: 1245 mm Max load (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity (spindle bore): 102 mm 2) Main Spindle Chuck size: 315 mm Spindle head: A2#11 ASA Spindle bearing diameter (front): 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle drive motor power (cont./30 min): 26/22/18.5 kW (S3 25% / S6 60% / S1 Cont.) Spindle speed range: 2 – 800 rpm Max spindle torque: 1123 Nm (15 min S3 15%) Power transmission: belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle head: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder through hole: 50 mm (H8) Pedpfex Rqkujx Aqqsgu Sub-spindle drive motor power (cont./30 min): 7.5/5.5 kW (30 min / S1 Cont.) Spindle speed range: 4,500 rpm Max spindle torque (30 min): 85 Nm Power transmission: belt 4) Travels X-axis: 260 mm Z-axis: 1350 mm Y-axis: 105 (±52.5) mm B-axis: 1350 mm C-axis: 1,2 360 (in increments of 0.001 degree) Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 10 m/min Rapid traverse B: 30 m/min C-axis: 200 rpm 5) Bed and Saddle Slant bed, angle: 30° Bedway width (Z-axis): 437 mm Saddle way width (X, Y-axis): 321 / 325 mm Sub-spindle travel: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool dimensions: 25 x 25 mm Max drill diameter: 50/32 mm (main spindle/sub-spindle) Driven tool power: 7.5/1.5 kW (5 min/Cont.) Driven tool speed: 5,000 rpm Driven tool torque: 95.5 Nm Driven tool collet (ER32): Φ3–Φ20mm (optional) Turret index positions: 1 position Indexing time: 0.15 s (1.2 s for full station) Max driven tool drilling diameter: Φ20 mm Threading: M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Pressure: 0.7 kW x 0.15 / 0.1 MPa (60/50Hz) 9) Machine Precision Positioning accuracy: X-axis: 0.01 mm Z-axis: 0.02 mm Y-axis: 0.02 mm C-axis: 0.0167 degrees Repeatability: X-axis: ±0.002 mm Z-axis: ±0.003 mm Y-axis: ±0.003 mm C-axis: ±0.006 degrees For questions or additional information, please send a message or call.