Hidrolik portal doğrultma presi

Hidrobrasil 200 T Portal-Richtpresse

Main cylinder press capacity: 200 t
- Maximum working pressure: 285 bar
- Cylinder stroke: 1500 mm
- Clear width / clear height: 1500 mm
- Distance between columns: 2050 mm
- Maximum lateral movement of the cylinder: 1450 mm
- Maximum longitudinal movement of the frame: 2800 mm
- Table plate dimensions: 4000 x 2000 mm
- Hydraulic power unit capacity: 5.5 kW
- Approach speed: 20 mm/s
- Working speed: 2 mm/s
Nljdoxrb Nbjpfx Afzjh
- Hydraulic oil not included in delivery
- Hydraulic power units are mounted on top of the press
- Hydraulic block and valves by Rexroth
- Air filter brand: FILTREC
- Oil filter brand: FILTREC
- Air and water (cooler) cooling system for the hydraulics
- Stroke cylinder integrated into the worktable

Rod diameter: 25 mm
- Stroke: 80 mm
- Control via cylinder controller or via the hydraulic unit when using manual lever control
- 10 stroke cylinders to be installed
- Digital control with position measurement via encoder and pressure measurement with data output
- Siemens KTP 900 9'' touchscreen display for programming (up to 99 programs):
- Maximum up/down stroke of cylinder
- Pressure holding time under the table
- Decompression time
- Working pressure adjustment
- Piece counter
- Pre-stop up/down stroke with 0.1 mm accuracy
- Alarm management
- Frame-mounted display for real-time process data
- Wireless control with dual-button for simultaneous operation
- Control cabinet with Siemens CPU
- Hydraulic unit with solenoid valves (replaces hanging control panel)
- Air/oil heat exchanger with decompression valve

5. ELECTRICAL INSTALLATION AND SAFETY
- The PLC system is from SIEMENS (S7-1200 series)
- Siemens brand LCD touchscreen (9’’), MTP900, fitted in the control cabinet
- Electrical components from SIEMENS, ALLEN BRADLEY, and PHOENIX
- System pressure of the pressure cylinder can be set via LCD touchscreen
- Modes (semi-automatic and automatic), power, vertical stroke and dwell time of the upper cylinder are programmable
- 99 recipes can be stored, and all above values can be programmed per recipe
- Activation via wireless control
- Includes double button for slow or fast movement, emergency stop and maneuvering confirmation
- Touch-sensitive safety edge on the lower side of the portal columns for operator safety
- Control cabinet is mounted on the sidewall of the gantry
- Rotary lock for cylinder
- Oil temperature is displayed on the LCD touchscreen
- Hydraulic oil overtemperature warning on LCD touchscreen
- Filter contamination status displayed on the LCD touchscreen
- System errors are displayed on the LCD touchscreen
- Pressing status information is displayed on the LCD touchscreen
- When the oil temperature reaches 45°C, the air cooler starts cooling the oil. If the temperature reaches 65°C, the machine operation is stopped until it cools down to working temperature
- User manual included
- The system fulfills all essential safety and health requirements in accordance with CE regulations.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.