Pick-up panelvan

isuzu M21 TEMT Single Steinmetzpritsche Ladekran Funk

Isuzu M21 T E MT Single (Track width 1.4m!) Steinmetz aluminum flatbed with loader crane. This vehicle is available for rent with a purchase option.
Fpjdpfx Aceyt Rttswjd

Chassis: Isuzu 21 T E MT Single
- Gross vehicle weight: 3,500 kg, payload (finished vehicle with loader crane and aluminum flatbed) approx. 650 kg
- 6-speed manual transmission
- Trailer coupling, ball head type, 3,500 kg with factory-installed electrical kit
- BI-LED lighting
- Electric parking brake
- Air conditioning
- Carplay radio
- Rearview mirrors with reversing camera
- Multifunction steering wheel
- Factory-installed PTO (power take-off)
- Tires: 205/75/R16C

Safety Pack 1:
- ABS: Anti-lock Braking System with BAS
- ASR: Traction control for rear axle
- EVSC: Electronic Stability Control
- LDWS: Lane Departure Warning System
- MOIS: Moving Object Detection
- DWS: Distance Warning System
- MAM: Emergency Braking in front of an obstacle
- FVSN: Forward Area Detection
- DDAW: Driver Drowsiness Detection
- TSR: Traffic Sign Recognition
- TPMS: Tire Pressure Monitoring System
- AEBS: Autonomous Emergency Braking System
- RM: Reversing Camera with Monitor
- AEBS: Autonomous Emergency Braking System for pedestrians and cyclists

Aluminum Flatbed:
- Internal dimensions: 2,720 mm (L) x 1,820 mm (W) x 400 mm (H)
- Floor panel: 18 mm
- Floor frame with airline rails all around
- Airline rails in the front wall
- Side walls: anodized aluminum, with folding step, easily removable
- Tool/storage box
- Work lights
- Other flatbed dimensions available on request

Loader Crane: with 3x hydraulic extensions
(Country of manufacture: Italy)
- Lifting capacity (manufacturer's spec): Max. 995 kg; 3.2 m = 815 kg, 4.40 m = 575 kg, 5.60 m = 400 kg, 6.80 m = 300 kg, 8.05 m = 220 kg
- CE compliant (EN 12999)
- Slewing range: 370° (slewing range limited to 190°)
- All hydraulic cylinders are double acting
- Piston rods hard-chromed
- Pressure relief and load-holding valves
- Emergency stop
- Control block with 5 control valves
- Separate hydraulic tank (33 l) with filter, mounted on crane base
- Outriggers extendable on both sides, special support, support width 3.10m
- Hydraulic supports pivotable 30° and 180°, CE, incl. M.O.L.
- Load hook and fastening clamps
- 12V vehicle voltage
- Electrical modules for Danfoss S800 control block, 4 functions
- Danfoss S800 control block, 5 functions including high-pressure filter
- Special support, support width 3.10 m, 1 pc
- Extra charge for shortened support legs: minus 80 mm
- Mechanical arm extension N: lift 1.30 m (7.0k)
- Stainless steel bolts and pipe clamps
- Dinitrol treatment (cavity protection)
- Zinc primer
- Switch for work lamps near the control block, factory-installed
- LED work lamp on articulated arm, factory-installed
- LED for 2 outriggers

Optional: Spade holder, 90° rope, ladder rack/transport rack on front/rear wall, additional tool/storage boxes available.

Subject to errors and prior sale. ... Air conditioning, climate control, VAT deductible, ABS, electronic immobilizer, central locking with remote control, tow bar, power steering, spare wheel, cab: close-range, crane, new vehicle, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, available for rental, particulate emissions sticker: 4 - green.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.