Çalışma platformlu yarı römork

KÖGEL Multi Chassis. Rungen

Equipment extract

Chassis
10110.122 Regular ladder-type frame in lightweight steel construction with through-bolted cross members.
10115.010 With pre-cambered chassis frame.
10300.108 Coupling plate approx. 8 mm thick, with 2-inch kingpin in accordance with DIN 74080 / ISO 337.

Undercarriage
I 17160.010 Axle lifting mechanism on axle 1
I 17165.103 Fully automatic, load-dependent axle lift control.
18330.700 Manufacturer of your choice Kögel – three-axle unit, with disc brakes Ø approx. 430 mm, offset approx. 120 mm. Air suspension with approx. 180 mm travel.

Vehicle Tyres
L 20520.010 Wheels with internal sensors according to UN ECE R141.
I 20540.028 6x 385/65 R 22.5 UNIROYAL TH 50 tyres
20865.005 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET120).

Chassis Attachments
20110.010 Landing gears (manufacturer of your choice from Kögel), mechanical with compensating foot, lift capacity approx. 24 t. Single-sided operation, right-hand side in driving direction.
I 21070.117 Splash protection system (spray suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 385/65 R22.5 tyres, consisting of 1 pair quarter-circle mudguards in front of the axles, 1 pair straight mudguards with spray flaps between 1st and 2nd axle, and 1 pair quarter-circle mudguards with spray flaps behind the axles.
22070.013 Side underrun protection in accordance with ECE R73.
I 25620.101 2 waterproof plastic toolboxes, interior dimensions approx. 545 x 400 x 400 mm. Installed at the rear, 1x left and 1x right.
26110.015 Rear right extendable access ladder.
27510.010 Tall, rigid rear underrun protection made of steel in accordance with ECE R58.
I 71800.020 1 pair each of extendable warning boards for oversized cargo, retroreflective red/white, with LED lighting, spiral cable and plug connection. Mounted at front and rear of vehicle.

Brake / Air Suspension System
32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic interface via ISO 7638 plug connection.
32125.010 EBS system (manufacturer of your choice from Kögel)
33420.040 Air suspension system including 1 raise/lower valve, installed on the left behind the axle unit in the direction of travel. Ride height adjusts automatically.
34320.001 2 fail-safe coupling heads at front, ISO 1728
34410.010 Air tanks for brake system and air supply, made of steel (EN 286-2).
Dcjdsxu S Sxepfx Aatep

Floor
40510.120 Floor panels approx. 30 mm thick
I 40513.020 Floor sealed all around
I 40542.023 Stake pockets for square tube posts approx. 80 x 80 mm, arrangement as per drawing J9: 8 stake pocket rails (18 stake pockets per rail: 4 each outside + 10 in the center)

Front Wall
I 40532.220 Accommodation for max. 14 square tube plug-in posts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside front wall
I 41710.201 Front wall approx. 2,000 mm high with steel volume corner posts, with profiled steel sheet, bolted/riveted to frame. 2 pairs of lashing points (permitted lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640.

Side Wall
43540.380 VarioFix steel slotted external frame
I 43560.253 24 pairs of lashing brackets in external frame (in accordance with EN 12640), permitted tensile force approx. 5,000 kg per ring.

Rear Impact Protection
42551.015 1 pair of steel

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.