Silindirik taşlama makinesi

Karstens

Durumu: kullanılmış, Üretim yılı: 1990, Taşlama çapı 360 mm Taşlama uzunluğu 1000 mm Punta yüksekliği 180 mm Puntalar arası maksimum iş parçası ağırlığı 250 kg Makine, Karstens yetkili servisinde revizyon sonrası çok az kullanım saatine sahiptir. Kodpfx Aasxbh Ebegolr Jetter ilerleme kontrolü Dijital gösterge İç taşlama aparatı Silindiriklik hassas ayarlı ara puntası Hidrolik ara punta mili Vb. Taşlama mili gövdesi hava yastığı ile hızlı ayar

Durumu: işlem için hazır (kullanılmış), Taşlama uzunluğu: 650mm, merkez yüksekliği: 150mm, taşlama taşı boyutları: 400x80x127mm, Mk 4 yuvalı kovan çapı: 50mm, ağırlık: 2.9t, kayış filtresi, elektrik devre şemaları ve hidrolik şemalar dahil, yerinde inceleme mümkündür. Klodpfxop T Uphs Aagjr

Durumu: mükemmel (kullanılmış), Üretim yılı: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. The machine has extremely low operating hours. As we specialize in Karstens cylindrical grinding machines, we can provide complete service (electrical and mechanical) for the machine after purchase. Technical data: Distance between centers: 1000 mm Center height: 180 mm Workpiece weight: 70 kg between centers, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MT4, speed continuously variable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MT4, quill stroke 45 mm Tailstock rest next to Z-axis table Quill force: 200-600 N Table swivel: 12.5 degrees Bfo0atkpzs Adjustable stroke feed spindle: 80 mm Rapid traverse stroke: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Net machine weight: 3500 kg Increment feed drive via DC motor Air-cushioned rapid adjustment of the grinding spindle head for quick and secure positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operation, feed movement controlled by rotary switch: Ksdpfxoh Rit Ee Aagslr Rapid approach, rapid return, grinding mode, feed stop, mym-feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding positions Workpiece spindle head with continuously variable drive for rotating and locking spindle. Feed control for longitudinal and plunge grinding, inputs for retraction, feed rates, infeed amounts, dwell times, clearance strokes Digital display for X-axis by Heidenhain Paper band filter unit can be offered upon request. Comparable to Weiss/ EMAG/ GP cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Maximum load, cantilevered: 1000 N (100 kg) Maximum load between centres: 3000 N (300 kg) Z-axis Table swivel angle: 10° Table drive, hydraulic: 0-4 m/min X-axis Cross-slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment travel (air cushion): 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed operation: Plunge / Longitudinal grinding 4 preselectable feed rates mm/min/Ø: 0.01–48 4 preselectable infeed increments mm: 0.001–0.1 Spark-out during shoulder grinding: s: 0–99 (0–99 strokes) Jog infeed mm/Ø: 0.001 Grinding spindle head Universal, swiveling: 0–180° Grinding wheel, external (D x width x bore): 500 x 100 x 127 or 203.2 mm Grinding wheel, face (option) D: 250 x 32 x 76.2 mm Grinding wheel, internal (option) D: 2–250 mm Drive power, external/face: 5.5 kW (7.5 kW) Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear, external: 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mount: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mount: MK 4/24 mm Spindle nose for chuck mounting: MK 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swiveling on the rotary part: 0–90° Tailstock: Quill taper/quill diameter: MK 4 / 75 mm Quill stroke: 45 mm Quill force: 100–800 N / 250–1400 N adjustable Quill operation: manual (foot switch) Fine adjustment of quill: ±40 μm Connection values: Total connected load: 6.5–10 kW Grinding spindle head: 5.5 (7.5) kW Kljdpfx Aotqf Rzoager Workpiece spindle head: 0.55 (1.1) kW Coolant purification: 0.75–2.2 kW Guideway lubrication pump: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 liters Pneumatics: 6 bar Comparable to Weiss / EMAG / GP cylindrical grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Durumu: yeni, Her türlü Karstens/GP konvansiyonel veya CNC silindirik taşlama makineniz için, arka puntadan iş parçası iş mili bloğuna, taşlama mili bloğundan bilyalı vidalar, cam cetveller, taşlama taşı flanşları, tahrik motorları, eksen tahrikleri (BOSCH SIEMENS), körükler, rulmanlar, K11/K21 otomatik ilerleme kontrol üniteleri (yeni ve kullanılmış), Z ekseni yönlendirme blokları değişimli olmak üzere her türlü yedek parça temini sunuyoruz. Ayrıca Weiss, EMAG, GP-silindirik taşlama makineleri, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller ve Fortuna gibi markalar için de yedek parça tedariği sağlanmaktadır. Ksdporaibvefx Aagslr

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2026, Karstens K11 1000 Full Equipment The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been inspected and is in excellent condition. As we specialize in Karstens cylindrical grinding machines, we can offer you comprehensive service (electrical and mechanical) for the machine after your purchase. Technical specifications: • Center distance: 1000 mm • Center height: 180 mm • Workpiece weight: 100 kg between centers (unsupported), 250 kg between centers (supported) • Grinding wheel diameter: 400 mm • Workpiece spindle: MK 4, stepless speed adjustment 30-450 rpm, swivel range 0 - 90° • Tailstock: MK4, quill stroke 45 mm, fine adjustment with micrometer • Quill force: 200-600 N, hydraulically operated via foot pedal • Table swivel: 10 degrees • Infeed spindle travel: 80 mm • Rapid traverse: 50 mm • Coarse adjustment (air cushion): 280 mm • External grinding spindle motor: 4 kW • Internal grinding spindle motor: 2.2 kW • Workpiece spindle motor: 0.55 kW • Net machine weight: 3,800 kg The infeed is driven by a DC motor. Air-cushion supported rapid adjustment of the grinding spindle head enables quick and safe positioning at the grinding point. Separate drives for external and internal grinding spindles. Fully automatic work cycle: infeed movement controlled via cam switch: rapid approach, rapid return, grinding operation, infeed stop, micron-level infeed. Automatic longitudinal grinding cycle. Central coolant supply for all grinding zones. Workpiece spindle head with steplessly adjustable drive for both live and lockable spindle operation. Infeed control for longitudinal and plunge grinding, programmable for return, infeed amounts, feeds, spark-out times, and idle strokes. Kljdpfx Ajh Riwdoagsr Digital readouts for grinding spindle (B axis), workpiece spindle, X-axis, Z-axis by HEIDENHAIN. Paper band filtration unit, approx. 250 L capacity. Comparable to Weiss / EMAG / GP cylindrical grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2026, Karstens K11 650 The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been inspected and is in excellent condition. As we specialize in Karstens cylindrical grinding machines, we can offer you comprehensive service (electrical and mechanical) for the machine after purchase. Technical data: - Distance between centers: 650 mm - Center height: 180 mm Kljdpfeh Rixxex Aager - Workpiece weight: 100 kg (between centers), 250 kg (between centers) - Grinding wheel diameter: 400 mm - Workpiece spindle: MT4, infinitely variable speed control 30-450 rpm, swivel range 0 - 90° - Tailstock: MT4, quill stroke 45 mm, micrometric adjustment - Quill force: 200-600 N, hydraulically operated by foot pedal - Table swivel: 10 degrees - Infeed spindle travel: 80 mm - Rapid traverse: 50 mm - Coarse adjustment air cushion: 280 mm - External grinding spindle motor: 4 kW - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 0.55 kW - Machine weight: net 3800 kg - Infeed drive via DC motor - Air-cushion-supported rapid positioning of the grinding headstock for fast and safe setup to grinding position - Separate drives for external and internal grinding spindles - Fully automatic working cycle, infeed via cam switch: rapid advance, rapid retraction, grinding mode, infeed stop, "mym" infeed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece headstock with infinitely variable drive for rotating and lockable spindle - Infeed control for plunge and traverse grinding, programmable for retraction, infeed amounts, feed rates, spark-out times, and air grinding - Paper belt filter unit approx. 250 L Comparable to Weiss/EMAG/GP cylindrical grinders/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2026, Centre height: 181 mm Centre width: 650 mm Maximum grindable workpiece diameter: 360 mm Maximum load between centers (unsupported): 1000 N (100 kg) Maximum load between centers: 3000 N (300 kg) Z-axis Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis Feed spindle travel: 80 mm Rapid traverse (hydraulic): 50 mm Kljdpfjtqf Sqox Aagor Coarse adjustment, air cushion: 280 mm Feed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 pre-selectable speeds (mm/min/Ø): 0.01-48 4 pre-selectable feed increments (mm): 0.001-0.1 Spark-out during shoulder grinding (s): 0-99 0-99 strokes Creep feed (tip infeed) (mm/Ø): 0.001 Grinding spindle head universal, swiveling: 0–180° Grinding wheel, external: D x width x bore (mm): 500 x 100 x 127 or 203.2 Grinding wheel, surface (option) D (mm): 250 x 32 x 76.2 Grinding wheel, internal (option) D (mm): (2–250) Drive power: external, surface (kW): 5.5 (7.5) Drive power, internal (kW): 2.2 Peripheral speed, external (m/s): 35 (50) Grinding wheel wear, external (mm/Ø): 160 Guard width (mm): 100 Grinding spindle diameter (mm): 60 Internal spindle mounting (mm): 80 (100) Workpiece spindle head: Stepless drive control: Mk 4 1/min: 30–270/50–450 Workpiece spindle lockable Spindle mounting (mm): MK 4/24 Spindle nose for flange mounting: MK 4 mm, cylindrical Ø63H6 x 6 Workpiece spindle head swiveling on turning part: 0–90° Tailstock: Quill mounting / quill diameter (mm): MK 4750 Quill stroke (mm): 45 Quill force (N): 100–800/250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total connected load: 6.5 – 10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant cleaning: 0.75 – 2.2 kW Lubrication pump guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 liters Pneumatics: 6 bar Comparable to Weiss / EMAG / GP cylindrical grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2026, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: - Distance between centers: 750 mm - Center height: 180 mm (250 mm optional) - Workpiece weight: 100 kg (between centers), 250 kg (between centers) - Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) - Workpiece spindle: MK 4, infinitely variable speed control 30–450 rpm, swiveling range 0–90° - Tailstock: MK4, quill stroke 45 mm, cylindrical correction - Quill force: 200–600 N manual (up to 2500 N available, adjustable as an option) - Table swivel: 12.5° - Traverse of infeed spindle: 80 mm - Rapid traverse: 50 mm - Coarse adjustment (air cushion): 280 mm - External grinding spindle motor: 4 kW (5.5 kW optional) - Infinitely variable speed adjustment of grinding wheel via potentiometer - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 1.1 kW - Hydraulic motor: 1.5 kW - Lubrication motor: 0.1 kW Klodpfx Ajiv Audeagsr - Hydraulic tank: 80 liters - Machine weight: net 3500 kg - Infeed drive via DC motor - Air-cushioned rapid adjustment of the grinding spindle stock for fast and safe positioning of the grinding location - Separate drive for spindles for both external and internal grinding - Fully automatic operating sequence, infeed movement via rose switch: rapid approach, rapid return, grinding operation, infeed stop, micron infeed - Automatic longitudinal grinding cycle - Central coolant supply to all grinding stations - Workpiece headstock with infinitely variable drive for rotating and clamping spindle - Digital infeed control with Siemens panel and Siemens PLC for longitudinal and plunge grinding, programmable for retraction, infeed amounts, feed rates, spark-out times, idle strokes, compatible with the old Karstens infeed control, with color Siemens touch panel - Scale on X and Z axes by HEIDENHAIN Comparable to: Weiss / EMAG / GP cylindrical grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2026, Karstens K11 1000 Premium Retrofit Universal Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: - Centre distance: 1100 mm - Centre height: 180 mm / (250 mm optional) - Workpiece weight: 100 kg between centers, 300 kg supported - Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) - Workpiece spindle: Morse taper 4 (MK 4), infinitely variable speed 30-450 rpm, swiveling range 0 - 90° - Tailstock: MK4, quill stroke 45 mm - Quill force: 200-600 N manual, (up to 2500 N adjustable, optional) - Table swivel angle: 10 degrees - Cross-slide travel: 80 mm - Rapid traverse: 50 mm - Coarse air cushion adjustment: 280 mm - External grinding spindle motor: 4 kW / (5.5 kW optional) - Continuously variable grinding wheel speed control via potentiometer - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 1.1 kW - Hydraulic motor: 1.5 kW - Lubrication motor: 0.1 kW - Hydraulic tank: 80 liters - Machine weight: net 3800 kg - Cross-feed driven by DC motor - Air-cushion supported rapid positioning of the grinding spindle stock for fast and precise approach to the grinding position. - Separate drives for external and internal grinding spindles. - Fully automatic operation sequence, in-feed movement via rotary cam switch: rapid approach, rapid retraction, grinding mode, in-feed stop, mym(feeding). - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece headstock with infinitely variable drive for both rotating and clamping modes. Kedpfx Aaoh Rimmogslr - New digital in-feed control with Siemens panel and Siemens PLC for longitudinal and plunge grinding, input for retraction, in-feed amounts, feed rates, spark-out times, idle strokes; compatible with old Karstens in-feed control, equipped with color Siemens touch panel - Comparable to Weiss/EMAG/GP-Cylindrical Grinding Machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Specifications: Centre distance: 1,100 mm Centre height: 180 mm / (250 mm optional) Kedpeiv Au Eefx Aagelr Workpiece weight: 100 kg (between centres), 300 kg (supported between centres) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed 30-450 rpm, swivelling range 0 - 90° Tailstock: MT4, quill stroke 45 mm Quill force: 200-600 N manual (up to 2,500 N adjustable, optional) Table swivel: 10 degrees Cross slide travel: 80 mm Rapid traverse distance: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Machine weight: net 3,800 kg Infeed drive via DC motor Air cushion assisted rapid adjustment of the grinding spindle headstock for fast and safe positioning to the grinding location. Separate drives for external and internal grinding spindles. Fully automatic operation, infeed movement controlled by rotary selector switch: rapid approach, rapid retraction, grinding cycle, infeed stop, micron infeed. Automatic longitudinal grinding cycle. Central coolant supply for all grinding positions. Workpiece spindle headstock with infinitely variable drive for both rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for longitudinal and plunge grinding, input for retraction, infeed amounts, feeds, spark-out times, idle strokes, compatible with old Karstens infeed control, with colour Siemens touch panel, scales in X and Z axis by HEIDENHAIN. Comparable to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller / Fortuna