2014 Komori LA 437 67 M

Komori LA 437 67 M

Installed in 2015

Approx. 97 million impressions

Format: 94 x 64 cm (37 x 25 inches)

Available: End of November 2025

Technical specifications:

PQC-S control console with touchscreen

KOMORI KHS-AI system for makeready optimization

KOMORI Smart Feedback for density adjustment and waste sheet reduction

Automatic washing and ink pre-setting

KOMORI PSP automatic size and substrate thickness setting

AMR (Automatic Make Ready) for preset job changeovers

Quick start function for production

Remote control of register and transfer cylinder adjustment

Automatic sheet size adjustment

Pneumatic side lay fingers

Mechanical and ultrasonic double-sheet detection at the feeder

S-APC: semi-automatic plate changing (no plate bending required)

KOMORI DSC high-performance sheet guiding with exclusively double-diameter impression and transfer cylinders

KOMORImatic dampening unit

technotrans alpha.c dampening solution supply

Antistatic blower at feeder head

Side air blower (feeder)

2-zone suction belt feed table

Delivery pile with sheet jogger/smoother

Sheet brake with infinitely variable speed adjustment

Air bars over the delivery pile

Antistatic bar above the delivery pile

Adjustable fans for precise sheet travel and pile formation

Weko AP160 powder sprayer

KOMORI PDC LII, online density measurement

KOMORI PCC CIP3/4 data conversion software

Max. sheet size: 640 × 940 mm

Min. sheet size: 297 × 420 mm

Max. print size: 620 × 930 mm

Plate size: 700 × 945 mm (thickness: 0.30 mm)

Blanket size: 800 × 955 mm (with bars)

Substrate thickness: 0.04 – 0.6 mm

Gripper margin: 10 mm

Plate clamp margin: 45 mm

Max. printing speed: 13,000 sheets/hour

Pile height, feeder: 800 mm

Pile height, delivery: 900 mm (*depending on paper, ink, and operating conditions)

Length: approx. 8,169 mm

Width: approx. 3,320 mm (without peripheral equipment)

Cedpfsxb U Ayjx Ad Nehd
Power consumption: approx. 53 kW / 50 Hz (without peripheral equipment)

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.