KomTec Universal GPM montaj masası, ahşap iskelet yapı içinKomTec
KomTec Universal GPM montaj masası, ahşap iskelet yapı için
KomTec
Durumu
Kullanılmış
Konum
Almanya 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine üreticisi:
- KomTec
- Durumu:
- kullanılmış
Fiyat ve Konum
- Konum:
- D - Nordrhein-Westfalen

Ara
Teklif detayları
- Listeleme kimliği:
- A194-62561
- Referans no.:
- 3311204
- Son güncelleme tarihi:
- 04.12.2025
Açıklama
Condition: NEW
with pneumatic clamping system.
The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction.
- Heavy, base construction of the machine frame for a flat working surface.
- Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder approximately 420 kg / 4,200 N at 10 bar operating pressure. Clamping can be done in two groups, 5 units and 4 units, so that two elements can be clamped/processed simultaneously.
- Working surface paneling with wooden boards wherever technically possible. (Optionally, a perforated steel plate is available, as shown in the photo.)
- Stop system at the bottom with 9 plug-in bolts and 7 plug-in bolts on the side for precise elements.
- Tilting mechanism of the assembly station via 3 hydraulic cylinders for element weights up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station.
- The electrical control cabinet is also protected and installed under the assembly station.
- Operation of the functions is carried out via a control pendant.
- At both ends of the station, a compressed air connection and socket outlet are installed, and on the long side of the station, there are 2 sockets and 2 compressed air connections for connecting hand tools.
- The stations are built in a modular system, so that they can be expanded, either immediately or at a later date, with a receiver station to create a complete turning station. A turning station can be seen in picture 3.
- Further options: assembly table without tilting function, perforated steel plates, other working dimensions on request.
Working area:
- Maximum element size (W x H): 12,000 x 3,800 mm
Itodpjwv Tqbofx Ahwsr
- Minimum element size (W x H): 1,000 x 100 mm
- Cylinder stroke of clamping cylinders: 320 mm
- Stop/plug-in bolt height: 120 mm
- Working height: approx. 700 mm
- Color: RAL 7035 light grey
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
with pneumatic clamping system.
The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction.
- Heavy, base construction of the machine frame for a flat working surface.
- Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder approximately 420 kg / 4,200 N at 10 bar operating pressure. Clamping can be done in two groups, 5 units and 4 units, so that two elements can be clamped/processed simultaneously.
- Working surface paneling with wooden boards wherever technically possible. (Optionally, a perforated steel plate is available, as shown in the photo.)
- Stop system at the bottom with 9 plug-in bolts and 7 plug-in bolts on the side for precise elements.
- Tilting mechanism of the assembly station via 3 hydraulic cylinders for element weights up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station.
- The electrical control cabinet is also protected and installed under the assembly station.
- Operation of the functions is carried out via a control pendant.
- At both ends of the station, a compressed air connection and socket outlet are installed, and on the long side of the station, there are 2 sockets and 2 compressed air connections for connecting hand tools.
- The stations are built in a modular system, so that they can be expanded, either immediately or at a later date, with a receiver station to create a complete turning station. A turning station can be seen in picture 3.
- Further options: assembly table without tilting function, perforated steel plates, other working dimensions on request.
Working area:
- Maximum element size (W x H): 12,000 x 3,800 mm
Itodpjwv Tqbofx Ahwsr
- Minimum element size (W x H): 1,000 x 100 mm
- Cylinder stroke of clamping cylinders: 320 mm
- Stop/plug-in bolt height: 120 mm
- Working height: approx. 700 mm
- Color: RAL 7035 light grey
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2002
İstek gönder
Telefon & Faks
+49 5235 ... ilanlar
Bu ilanlar da ilginizi çekebilir.
Küçük ilan
Nevers
2.738 km
WEINMANN
WEINMANN
WEINMANN
Küçük ilan
Zielona Góra
2.093 km
Doğrama maki̇nesi̇
BOOSTONER-02
BOOSTONER-02
Küçük ilan
Stadthagen
2.490 km
Marangozluk makinesi
RandekTruss System NT
RandekTruss System NT
Küçük ilan
Cadolzburg
2.254 km
Kasa kamyoneti
IVECODaily 35S18HA8 Koffer LBW+ACC+LED+NAVI Mod.25
IVECODaily 35S18HA8 Koffer LBW+ACC+LED+NAVI Mod.25
İlanınız başarıyla silindi
Bir hata oluştu













































