Oda tipi kurutucu

Lauber Längsstromtrochner Typ 2 S6

We are offering this very well-maintained Lauber longitudinal flow dryer, type 2 S6 chamber dryer, year of manufacture 2022.

Model/Plant No.: 2 S-6 / 44217
Rated voltage: 3-phase AC 400/230 V 50 Hz
Motor fan rated power: 1.1 or 0.75 kW
Motor fan rated current: 7.1 A
Rated power of electric heater: 7.5 kW
Total rated power: approx. 15 kW
Total rated current: 25 A
Circuit protection (slow-blow fuse): 25 A
Control voltage: 24 V DC
Circuit diagram number: SP361 RV
Year of manufacture: 2022

Technical specifications:
A double-shell thermal insulation of the timber dryer ensures excellent insulation.
The interior cladding side panels are made from 1.5 mm thick, seawater-resistant special aluminium and are tightly welded.
The exterior cladding consists of stucco-profiled and stucco-smooth sheets.
The thermally insulated floor is designed as a tightly welded stainless steel tray, offering long-term resistance to aggressive wood extractives.
The timber dryer is installed on a load-bearing, level surface. A special continuous foundation is not required!
The easily accessible front door opens wide and is fitted with an all-round rubber seal to ensure user-friendly operation and high steam tightness.
An aluminium stacking trolley enables lateral loading and unloading. Interior and removable exterior rails allow for convenient and space-saving loading.
Efficient and even longitudinal ventilation of the wood stack is provided by a high-performance radial fan mounted at the front, output 0.55 kW.
The timber dryer is heated by electric heating elements with a total output of 6.0 kW.
Excess moisture is evacuated via servo-controlled air inlet and exhaust dampers, each 100 mm in diameter.
Chamber climate humidification is provided as needed via cold water spray.
140 straight stacking battens made of aluminium are included in the scope of supply.
Fpsdoy Hdmnjpfx Almjg

The standard PLC control system manages the drying process fully automatically and offers user-friendly operation via a 7" colour touchscreen. You only need to enter three parameters:
1. Wood species
2. Wood thickness
3. Desired final moisture content

The control system optimizes the drying curve based on these inputs, so your timber is available in the desired quality within a short period.

Standard control equipment includes:
- 3 wood moisture measurement points, incl. penetration electrodes and measuring cables
- 1 wood equilibrium moisture measurement point
- 1 air temperature measurement point

We deliver the Lauber timber dryer ready for operation!
Comprehensive operating instructions, drying recommendations, and set-up/loading guidelines are included.

Original price: EUR 31,120 plus VAT
Original lead time: 15 months
The dryer has been used for approx. 30 drying cycles and is in very good condition.

If you have any questions or need further information, please feel free to send us a message or call us.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.