Kullanılmış Erhardt & Spiess Es 175 satın al (9.117)

Koşul: ikinci el, Üretici: Tennant Company (ABD) Ncjdpfewf E Drex Ahgot Model: M20 Tip: Endüstriyel Fırçalama-Süpürme Makinesi (kombinasyon makinesi) Güç kaynağı: Dizel, LPG veya Akü (versiyona bağlı olarak) Temizleme Genişliği: - Ana fırçalar: ~1020 mm (40 inç) - Yan fırçalarla: 1400 mm'ye kadar (55 inç) Çözelti Tankı Kapasitesi: 303 litre Geri Kazanım Tankı Kapasitesi: 360 litre Çalışma Hızı: ~8 km/s Yaklaşık Ağırlık (boş): ~2.177 kg Yaklaşık Boyutlar: - Uzunluk: ~2460 mm - Genişlik: ~1220 mm - Yükseklik: ~1430 mm

Koşul: ikinci el, Üretim yılı: 2007, Uzatılabilir üst yapı: Evet Daha fazla bilgi için Theo Lelie ile iletişime geçin. Nodpoyrtm Hofx Ahgjct

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, ES-300 ASTD KESME MAKİNESİ SABİT KÖPRÜLÜ MERMER, GRANİT VE SERAMİK KESME MAKİNESİ MOD. ES-300 A, X VE Z EKSENLERİNİN OTOMATİK HAREKETİ, VOLANLI ARKA DAYAMA VE 2 SERBEST MAKARA İLE. Ncsdpsy Dch Esfx Ahgjt

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2007, toplam uzunluk: 13.400 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 205/65R17.5, dingil mesafesi: 9.800 mm, renk: beyaz, Üretim yılı: 2007, Donanım: ABS, SAF axle. 2 x trailing steer axles. Extendable. Lifting roof. Sliding roof. Loading platform length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. = Further Information = Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30% Rear axle 2: Twin tires; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30% Rear axle 3: Twin tires; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30% Rear axle 4: Twin tires; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40% Weights Ncsdpey N Aw Rofx Ahget Unladen weight: 9,940 kg Payload: 37,660 kg Gross vehicle weight: 47,600 kg Identification Type number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We speak Russian. We always strive to provide correct information, however, no rights can be derived from the published texts.

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 08/2000, yükleme alanı uzunluğu: 18.100 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 18.100 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 900 mm, renk: diğer, Üretim yılı: 2000, Donanım: vinç, Structure Year of manufacture: 2009 Crane Number of hydraulic extensions: 5 Remote control: ✓ Rotator: ✓ Boom reach: 15 m Lifting capacity: 5,700 kg = Additional Information = Axle configuration Rear axle 1: Twin tires; Max. axle load: 9,000 kg; Steered Rear axle 2: Twin tires; Max. axle load: 9,000 kg; Steered Rear axle 3: Twin tires; Max. axle load: 9,000 kg; Steered Weights Curb weight: 9,950 kg Payload: 29,050 kg Gross vehicle weight: 39,000 kg Functional Crane: PALFINGER 17502, year: 2009, mounted behind the cab Body manufacturer: PALFINGER 17502 Loading platform height: 90 cm Maintenance, history, and condition APK (Technical Inspection): valid until 09.2026 Technical condition: very good Visual condition: very good Identification Registration number: OR-33-ND = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the given information. Office Phone: MOB: Nederlands - English - Deutsch - Français - Español - Italiano (Available on WhatsApp and Viber). MOB: Nederlands (Available on WhatsApp and Viber). When you pay by bank transfer, the funds must be transferred to our bank account below. Always verify the payment details as listed on our website. If you have received different information, please contact us. If you have doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO Ncjdpfoyx Iv Rsx Ahgjt EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Koşul: ikinci el, Üretim yılı: 2010, güç: 15 kW (20,39 bg), giriş voltajı: 380 V, presleme kuvveti: 175 t, strok boyu: 280 mm, işletme hızı: 9 mm/s, geri hız: 80 mm/s, masa genişliği: 90 mm, masa yüksekliği: 900 mm, boğaz derinliği: 400 mm, tabla uzunluğu: 3.100 mm, koç mili mesafe tablosu: 429 mm, kolonlar arası açıklık: 2.550 mm, yağ tankı kapasitesi: 185 l, toplam uzunluk: 5.000 mm, toplam genişlik: 2.170 mm, toplam yükseklik: 2.800 mm, toplam ağırlık: 9.600 kg, We offer this used Blecken CNC HAPPE SE 3100 X175 straightening press, year of manufacture 2010. Technical Data: Blecken CNC HAP 3100-175 Hydraulic Press Brake Model: Blecken CNC HAP 3100-175 with Delem ER70 CNC control Axes: 4 axes (Y1, Y2, X, R) Capacity and Performance • Power: 175 t • Bending length: 3,100 mm • Approach speed: 100 mm/s • Bending speed: 9 mm/s • Return speed: 80 mm/s Dimensions and Strokes • Distance between uprights: 2,550 mm • Cylinder stroke: 280 mm • Table / ram opening: 429 mm • Throat depth: 400 mm • X-axis stroke: 500 mm • X-axis speed: 500 mm/s • R-axis stroke: 200 mm • Working height (table): 900 mm • Table width: approx. 90 mm Nsdpfey Rw H Asx Ahgect General Specifications • Motor power: 15 kW • Oil tank capacity: 185 l • Control: CNC Delem ER70 • Noise level: ≤ 70 dBA • Voltage: 380 V Physical Dimensions and Weight • Total length: 5,000 mm • Total height: 2,800 mm • Total width: 2,170 mm • Weight: 9,600 kg If you have any questions or need further information, please do not hesitate to send us a message or call us.

Koşul: yeni, azami yük ağırlığı: 15.825 kg, toplam ağırlık: 20.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.550 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete range of vehicles, including those available for immediate or short-term delivery, can be found on our website. This is an excerpt from the equipment features. Full equipment details available on request. Chassis: * Steel welded construction with welded longitudinal beams and punched Z-cross members, narrow cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly, two insertion pockets for drive-on ramps under the loading floor, closure plate in the rear head frame Underrun Protection: * In accordance with EU regulations Front Landing Legs: * Single-sided operated landing legs Rear Support: * Two adjustable drop-down supports Axles: * 2 x 10 t air suspension axle unit, SAF make, drum brakes approx. 300 x 200 mm, wheel connection with center mounting for twin tyres, ABS, total air suspension lift approx. 200 mm, lift approx. 140 mm, lower approx. 60 mm, controlled by manual lever with detent function Tyres: * 8-fold, 235/75R 17.5 - make at our discretion, mounted on steel rims 6.75 x 17.5, with offset Splash Protection: * PVC splash guards in front of and behind the axles in accordance with EU regulations Load Securing: * Drill holes for lashing straps every approx. 150 mm on the outer frame, lashing capacity approx. 2.5 t (lashing straps can be hooked in even with drop sides closed, chamfered outer frame) * 6 pairs of folding lashing rings, evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 plug-in stakes: 3 pairs of stake pockets evenly distributed on the outer frame Brake System: * Pneumatic brake system in accordance with EU with EBS * Two coiled connecting lines to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake on one axle Floor: * Approx. 28 mm Z-hardwood floor flush-fitted in the outer frame Front Wall: * Detachable 25 mm drop side Lighting System: * Lighting system in accordance with EU regulations, 24 Volt, multi-chamber rear lights, license plate lights, side marker and outline lights at the rear, terminal box on the left of the drawbar including connection cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable beacon at the rear * Delivery includes an additional 40 mm towing device (GVW max. 13,500 kg) Paintwork: * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technological standards * Superstructure parts cleaned, primed, and hot-dip galvanized Chassis: * Hot-dip galvanized + RAL 3002 carmine red * Drop sides: RAL 3002 carmine red * Kinnegrip stakes: RAL 3002 carmine red * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Mounted parts: galvanized / KTL black Contour Marking: * In accordance with EU, yellow on sides and rear Including Special Equipment: * Rear extension by approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking at approx. 200 mm intervals * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 plug-in stakes made of galvanized tubular steel, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20' container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 Ncodpfxey Auhbs Ahgot * 1 pair of aluminum loading ramps, load capa

Koşul: yeni, azami yük ağırlığı: 32.155 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Selection of features. Full specification on request. Chassis: * Welded structure made of high-quality steel profiles with punched profile cross members. Designed for high point loads. Coupling system: * Fifth wheel plate with 2-inch kingpin. Underrun protection: * In accordance with EC regulations, bolted design. Side underrun protection: * In accordance with EC regulations. Landing legs: * 2 x 12 t landing legs with compensating foot and single side operation (right side in direction of travel). Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, centered wheel hub ET120, ABS, total air suspension travel approx. 180 mm (lifting approx. 110 mm, lowering approx. 70 mm) * Air suspension controlled via manual control valve with stop function. Steering: * Last axle forced-steered via rod linkage. Axle lift: * First axle liftable, with fully automatic load-dependent lift control. Brake system: * Two-line pneumatic brake system according to EC with EBS and RSS, automatic load-sensing control, spring-loaded cylinders for parking brake, anti-interchange couplings mounted fixed to front cross member, no connecting line to tractor unit. * Manufacturer: Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in cab (prepared by vehicle manufacturer). Mudguards: * In accordance with EC regulations, 1/4 PVC mudguards front and rear of axle units. Load securing: * 9 pairs of foldable lashing rings, evenly distributed (traction force approx. 8.0 t) * 8 pairs of foldable lashing rings, evenly distributed (traction force approx. 2.5 t) * External frame features a lashing point approx. every 500 mm for tension belts (lashing can be applied with side walls closed; outer frame with chamfered design). Stake pockets: * 10 pairs of stake pockets evenly distributed in outer frame * 4 rows of transverse stake pockets across the loading area * Plug-in stanchions: 20 pcs, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front bulkhead. Front bulkhead: * Reinforced fixed steel construction, interior paneled with approx. 9 mm phenolic plywood (height approx. 1,250 mm) Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame. Sideboards: * 4 x 25 side panels and rear wall made from anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions. Nedpjy Auhzefx Ahgoct * Sideboard and stanchion magazine: under chassis * Insertion rails on left and right for sideboards and stanchions Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber lights, LED side marker lamps, LED front position lamps (white), LED rear outline lamps, license plate lamps * 1 x 15-pole and 2 x 7-pole socket connections on front cross member. Equipment: * Two wheel chocks with holders * Warning boards according to ECE 70 * Work light mounted on light bar (switches on via reverse gear) * Holder for beacon at rear incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Painting: * Chassis and front bulkhead cleaned by sandblasting, primed and finished in a single color * Chassis: hot-dip galvanized + RAL color of choice * Front bulkhead: RAL color of choice * Sideboards: anodized aluminum * Front bulkhead stanchions: hot-dip galv

Koşul: yeni, azami yük ağırlığı: 16.180 kg, toplam ağırlık: 20.500 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specifications. Full specifications available upon request. Chassis: * Steel welded construction made from welded longitudinal beams and inserted Z-crossmembers, closely spaced crossmembers for high floor load capacity * Ramp storage: Two insertion pockets for each one loading ramp located between the longitudinal beams behind the axle assembly below the loading floor, with cover plate in the rear end frame Underrun protection: * According to EU regulations Landing legs: * Front: Landing legs operable from one side * Rear support: Two adjustable drop-down legs Axles: * 2 x 10 t air suspension axle assembly, SAF brand, drum brakes approx. 300 x 200 mm, center-location for twin tyres, ABS, total air suspension travel approx. 200 mm (comprising approx. 140 mm lift and 60 mm lowering), control via lever with detent function Tyres: * 8-fold, 235/75 R17.5 – make at our discretion, mounted on 6.75x17.5 rims with offset Mudguards: * PVC, fitted in front of and behind the axles according to EU specifications Load securing: * Perimeter frame with tie-down points approx. every 150 mm for lashing straps, tensile strength approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t each * Stake pockets for removable stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed Braking system: * Pneumatic braking system in accordance with EU requirements with EBS * Two spirals for connection to the tractor unit, with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Lighting: * Lighting system according to EU standard, 24 Volt, multi-chamber tail lights, license plate lights, side marker lights and lane marker lights at the rear, connector plate on the left at the towing bar, incl. connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with brackets * Detachable rotating beacon at the rear * 40 mm towing device supplied (max. GVW 13,500 kg) * Rear extension approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking at approx. every 200 mm * Mechanically adjustable fixed drawbar, 6 x approx. 100 mm increments, with bolted 50 mm towing eye according to DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe removable stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Extendable container locks for 1 x 20', extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and hot-dip galvanized to the latest industry standards * Superstructure parts cleaned, primed, and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL 9011 graphite black * Outer frame: Hot-dip galvanized + RAL 9010 pure white Ncodpfx Asy Auf Tjhgst * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Mounted parts: galvanized / KTL black

Koşul: ikinci el, makine/araç numarası: W09BLH3556EE32123, Üretim yılı: 2006, Daha fazla bilgi için Theo Lelie ile iletişime geçin. Nedsy Dgkqopfx Ahgoct

Koşul: yeni, azami yük ağırlığı: 39.070 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Chassis: * Welded structure made of high-quality steel profiles with through cross-members. Designed for high point loads * Outer frame as UNP profile * Wear plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also suitable for 3.5-inch mounting) Underrun protection: * According to EU regulations, bolted version Side impact protection: * According to EU regulations Landing gear: * 24 t landing legs with single-sided operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheel bolts with ET 120, total air suspension lift approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary slide valve with stop function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on the lift/lowering unit bracket * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start assist via push button in driver's cab (15-pin socket PIN12). The cab push button is not included in delivery Brake system: * Two-line compressed air brake system according to EU standard with EBS and RSS, automatic load-dependent adjustment, spring-loaded cylinders as parking brake, anti-swap coupling heads firmly mounted on front cross-member, no connecting line to the tractor unit, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on rim 11.75 x 22.5 (brand of our choice), ET 120 * Basic tyre pressure monitoring system, connected to the EBS CAN-bus system * Tyre pressure display in the driver’s cab (pre-installed by chassis manufacturer) Mudguards: * According to EU regulations, PVC mudguards (half-shells) over all axles * Mud flaps with anti-spray design Load securing: * 8 pairs of hook plates welded into the outer frame (pulling force approx. 3 t) * 6 pairs of lashing rings in the outer frame, evenly distributed (pulling force approx. 10 t) Stanchion pockets / stanchions: * 5 pairs of stanchion pockets recessed into the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stanchion pockets recessed into the floor, approx. 90 x 90 x 4 mm * 10 removable stanchions made of galvanized square tube, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Front wall bolted, approx. 1,200 mm high, sheet metal clad Stanchion magazine: * Magazine for removable stanchions inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized Omega steel profiles Lighting system: * According to EU regulations, 24 Volt with multi-chamber lights, LED side marker lights, white LED position lights front, LED outline marker lights rear, license plate lights * 1 x 15-pin and 2 x 7-pin socket at the front cross-member Equipment: * Warning plate according to ECE 70 * 2 x LED work lights at the lamp carrier (activated by reverse gear) * Bracket for rotating beacon at the rear (including rotating beacon) Nsdpfx Aheyz E T Sjgsct * 1 folding and extendable rear access ladder (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via switch on the c

Koşul: yeni, basınç: 135 bükme uzunluğu: 4000 sütun genişliği: 3300 gün ışığı: 430 strok uzunluğu (maks.): 200 sütun boğaz derinliği: 400 ölçüm (UxGxY): 4800x1900x2700 ağırlık yaklaşık: 10.000 Nodpfxsf Am Rhe Ahgsct

Koşul: yeni, basınç: 175 bükme uzunluğu: 3200 sütun genişliği: 2700 gün ışığı: 430 strok uzunluğu (maks.): 200 sütun boğaz derinliği: 400 ölçüm (UxGxY): 4200x1900x2700 ağırlık yaklaşık: 10.000 Njdpfsd Akllex Ahgect

Koşul: onarım gereklidir (kullanılmış), Üretim yılı: 2000, Satılık Paal konveyör KES1750 Konveyör, yenileme ve kurulum düşünceleriyle satın alındı, ancak planlar değişti. Bu büyük ve çok verimli bir besleyicidir. Mevcut yeni besleyicilerle karşılaştırıldığında bu, yenileme ve kurulum için iyi bir temeldir. Genişlik 1800cm Çalışma genişliği 1750 Ncsdpfx Asnvdk Ajhgst Besleme bölümünün uzunluğu 8000cm Yükselen bölümün uzunluğu 9000cm Balya makinesinin girişine kadar olan yükseklik 4195cm Ağırlık yaklaşık 12 ton Yenileme için koşullar Fiyat 11 900,- EUR Anlaşmaya göre tamamen yenilendikten sonra satma imkanı tahmini + 17 950 EUR net

Koşul: yeni gibi (sergi parçası), Bu, GN 1/1 için toplam 16 yuvaya sahip sağlam yapılı paslanmaz çelik bir tezgahtır. 2004 üretim yılına ait iki Rational SCC/CM(P) kombi buharlı pişiriciyi takmak için tezgah üzerinde mandallar vardır. Tezgahta ayrıca kombi buharlı pişiricilerin besleme hatları için iki besleme geçişi vardır. Masa en iyi durumdadır. Belirtilen fiyat net artı %19 KDV'dir. IKINCI EL EKIPMAN HIZMETIMIZ SIZIN IÇIN: -Uygun fiyatlarla yüksek kaliteli markalı ekipman. -Profesyonel revizyon / muayene ve profesyonel temizlik -test edilmiş ve tamamen işlevsel - veya para iadesi -Sevkiyat veya kendi kendine toplama esnek olarak seçilebilir -Yetkin danışmanlık - satın alma öncesi ve sonrası -kullanım talimatları, bağlantı şemaları ve yedek parçaların sağlanması -DGUV V3 mühürüne göre test Teknik veriler: -dış boyutlar GxDxY: 1750x880x920mm Yüksekliği ayarlanabilir ayaklar GN 1/1 için -16 yuva -sabitleme için mandallar dahil 2 Rasyonel SCC/CM(P) -2 Kombi buharlayıcılardan gelen besleme hatları için açıklıklar Durum: Kullanılmış, tamamen işlevsel VERSAND / NAKLİYE: -Anlaşmaya göre teslim veya teslim alma. -Talep üzerine dünya çapında nakliye / Talep üzerine dünya çapında nakliye -Adalara veya dağ istasyonlarına yalnızca anlaşmayla sevkiyat Nedpen Hvymjfx Ahgect Herhangi bir sorunuz mu var, tavsiye mi istiyorsunuz veya yerinde bir şeye bakmak mı istiyorsunuz? Çalışma saatlerimiz içinde bize telefonla ulaşabilirsiniz: Pazartesi-Cuma 09:00 - 13:00 ve 14:00 - 17:00. Satış, yalnızca genel hüküm ve koşullarımıza (GTC) tabidir.

Koşul: ikinci el, Üretim yılı: 1977, Taşıma kapasitesi 2 t Kaldırma yüksekliği 5000 mm Açıklık 5000 mm 6 metre erişimli yan vinç Raylı sistem uzunluğu yaklaşık: 60 metre Teknik veriler üretici veya işletmeci tarafından verilmiş olup, bizim için bağlayıcı değildir. Ara satış hakkımız saklıdır; yalnızca genel ticaret ve satış şartlarımız geçerlidir. Hakkımızda depoda 400'den fazla kendi makinemiz Ncsdpfeyutvtox Ahget 15.000 m²'nin üzerinde depolama alanı, 70 t vinç kaldırma kapasitesi atölyeniz için 10.000'den fazla aksesuar ürünü Makine, üretim hattı veya işletmenizi satmak istiyorsanız, lütfen bizimle iletişime geçin. Daha fazla teklifi web sitemizde bulabilirsiniz. Randevu ile yerinde inceleme mümkündür. Ziyaretinizi bekliyoruz. Markus Hirsch Ekibi

Koşul: iyi (kullanılmış), Teslimat kapsamı şunları içerir: 01x kakma raf ızgarası, kullanılmış Malzeme rengi: sıcak daldırma galvaniz Toplam derinlik: 1.175 mm (destek çubuğu yönü) Net açıklık: 1,097 mm Toplam genişlik: 890 mm (çapraz çubuk yönü) Destek çubuğu çapı: 50/1.80 mm Çerçeve yüksekliği: 50 mm Çapraz çubuk desteği: 40 mm Ağ genişliği: 90 x 60 mm Ağırlık: yaklaşık 14,11 kg | adet. Dahili tanımlama: GR-17 Açıklama: - Izgaralar hasar, çizik ve ezik gösterebilir, Ncsdpjnh Rb Nsfx Ahget Kaynaklar. - Yerleştirilen raf ızgaraları şu şekilde kullanım için uygundur 40 mm çapraz çubuk desteği, raflar uygundur 1.200 mm dik derinlik. Ürün hakkında genel bilgi: Bu ürün sadece teslim alınmak üzere sunulmaktadır. Başka herhangi bir nakliye veya Bu ürünün istenen nakliyesi veya sevkiyatı ek ücretlerle ilişkilidir. bağlı olarak bizden ayrıca talep edilebilecek ek maliyetler teslimat yeri veya teslimat kapsamı.

Koşul: ikinci el, Sıkıştırma plakası, kaynak tablası, kaynak tablası, doğrultma plakası -Genişlik: 1755 mm -Uzunluk: 2410 mm -Yükseklik: 845 mm -Kısmen dişli delikli -Plaka kalınlığı: 35 mm -Destek nervürlü -Mengene ile -Taşıma ölçüleri: 1800 / 2560 / H1000 mm -Ağırlık: 2000 kg Nsdpeb Hiy Dsfx Ahgsct

Koşul: ikinci el, Sıkıştırma plakası, işaretleme plakası, ölçüm plakası, ölçüm tablası, kaynak masası, kaynak masası, doğrultma plakası -Yüzey: çok iyi -Genişlik: 500 mm -Uzunluk: 800 mm -Yükseklik: 175 mm -Plaka kalınlığı: 26 mm-ile: destek nervürleri -Ağırlık: 90 kg Ncedpodnuhisfx Ahgst

Koşul: mükemmel (kullanılmış), Vidalı silindir için hidromotor Enjeksiyon ünitesi boyutu ES3550 Hägglunds Sürücüler Tip CA50 20 2 0 0 N 004 Ncjdpofnqagsfx Ahget

Koşul: işlem için hazır (kullanılmış), Danfoss Değişken Hızlı Sürücü VLT 103 frekans invertörü 175B5037 SN: 021804G165, kullanılmış, iyi durumda, %100 işlevsel, fotoğraflara göre teslimat kapsamı Nsdotyr Acopfx Ahgect

Koşul: iyi (kullanılmış), Bağlama plakası, kaynak masası, hizalama plakası -Genişlik: 1750 mm Nedpfxob A Hu Do Ahgect -Boy: 1400 mm -Yükseklik: 840 mm -destek nervürlü -Ağırlık: yaklaşık 1000 kg

Koşul: yeni, azami yük ağırlığı: 56.570 kg, toplam ağırlık: 66.500 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle stock with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment specification. Complete equipment details available on request. Chassis: * Chassis frame construction made of welded longitudinal beams and inserted cross members * Underrun nose width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the main beams * Maximum cross member spacing 400 mm (for longitudinally laid floor) * 3.5 inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing legs: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brake Ncedpfxowx Dcte Ahgjt * 22.5 single tires * Axle spacings approx. 1,700/1,810/1,810 mm * Air suspension units, each with 10 t load capacity, lifting and lowering device with 1 rotary valve Knorr/Wabco * Mounting bracket for lifting and lowering device, bolted version Brakes: * Smartboard/TIM/Infocenter on the holder for lifting and lowering, in addition to the lifting and lowering valve, without battery (can only be operated with the towing vehicle) * Holder for lights and brakes at the front of the underrun nose, total height approx. 700 mm * Tire pressure monitoring basic version, connected to the EBS CAN bus system * With dual release valve for brake and spring accumulator * Test nipple for brake cylinder pressure on the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device installed at the rear left in driving direction * EBS brake system by Wabco, EBS diagnostics via CAN bus (EBS connector), no external diagnostic cable provided!! Tyres: * 8 x 445/65 R 22.5 – branded manufacturer of our choice * Hub centering Lubrication: * Grease nipple strips on the bogies and at the front on the steering. No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lamps on top of the front wall (rear-facing), switch on lifting/lowering control bracket * Robust front wall for platform body * Contour markings side yellow, rear yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lamps, installed in the lamp plate, switched via reverse gear * 2x LED work lamps, switched via reverse gear, 1x per side near landing gear * 2x LED reversing lights per side, 1 mounted before the 1st axle * Lighting/wiring system by manufacturer of our choice * Number plate lighting * The towing vehicle must provide adequate power for the chosen lighting (esp. reversing lights) * Position lights front, bottom, white, 1 each right and left (LED) * 24 volt lighting system with large multifunction lamp * Side marker lights (LED) flashing * 1x 15-pin and 2x 7-pin connectors at the front via multifunction box * EBS socket * 1 pair of lane departure warning lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL color of choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing legs black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD SLP lashing points per side w

Koşul: yeni, azami yük ağırlığı: 39.850 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment specification. Full specification available on request. Chassis: * Welded construction made from high-grade steel profiles with punched profile cross members * Designed for high point loads. Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide * Mounting bracket at front for customer-side installation of a support device, approx. 90 x 90 x 4 mm Coupling gear: * 2-inch kingpin (also suitable for 3.5) Underride guard: * According to EC standards, bolted version Side underrun protection: * According to EC standards Landing legs: * 24 t landing legs, single-sided operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle assemblies, brand of our choice, disc brakes approx. 430 x 45 mm * ABS Nedpfxjwx Dbpj Ahgjct * Centrally aligned wheel connection, 10 holes with ET 120 * Total air suspension lift approx. 200 mm, comprising lift approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent function, with RTR function * Switch for second driving height (+ approx. 50 mm) on the lift/lower device bracket * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start-up aid via push button in the cab (15-pin socket PIN12). Push button in the cab not included in scope of delivery Brake system: Brand of our choice * Dual-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Non-interchangeable coupling heads fixed to the front cross member, without connecting line to the truck Tyres: * 6x, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), ET 120 * Basic version of tyre pressure monitoring, connected to EBS CAN bus system * Tyre pressure display in cab (pre-installation by truck manufacturer) Mudguards: * According to EC standards, PVC mudguards (half-shells) over all axles * Mud flaps with anti-spray Load securing: * 8 pairs of hook plates welded into outer frame (lashing capacity approx. 3 t) * 6 pairs of lashing rings on the side in the outer frame, evenly distributed (lashing capacity approx. 10 t) * 13 pairs of lashing eyes (U-rings) in the outer frame (tested lashing capacity approx. 2.5 t per lashing point) Stanchion pockets/stanchions: * 5 pairs of stanchion pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stanchion pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stanchions made of galvanized square tube, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: * Bolted front wall, approx. 1,200 mm high, clad with approx. 5.5 m sheet metal Stanchion magazine: * Inside at the front wall, magazine for plug-in stanchions Floor: * Approx. 28 mm hardwood floor recessed in outer frame, with galvanized omega-steel profiles Lighting system: * According to EC standards, 24 Volt with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate illumination * 1x 15-pin and 2x 7-pin connectors on front cross member Equipment: * Wheel chock with double holders * Warning sign according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for rotating beacon at rear (incl. rotating

Koşul: yeni, azami yük ağırlığı: 34.350 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification on request. Chassis: * Welded construction from high-quality steel profiles with punched cross members, suitable for high ground or point loads, featuring a heavy-duty outer frame * Rear loading floor as a steel welded construction, equipped with two welded-in outer driving rails made from 5-hole steel plate (hole pattern system Lohr/Rolfo), hydraulically lowerable over a length of approx. 2,250 mm by approx. 350 mm * Rear of vehicle incorporates a hydraulically extendable loading table (approx. 1,500 mm) as a steel welded structure with 5-hole steel plate (hole pattern system Lohr/Rolfo) cover, lamp mount, and 2 ramp compartments with ramp supports * Rear section operated and controlled via an electric-hydraulic power unit, mounted in a stainless steel box on the left side of the chassis, controlled by radio remote control * Power supply via the towing vehicle’s battery (NATO socket on the front wall, no connecting cable to the tractor) Kingpin: * 2-inch kingpin, replaceable from below Underrun Protection: * According to EU standards, fixed mounted Landing Legs: * 2 x 12 t landing gears with 2-speed gearbox Axles: * 3 x 9 t air suspension axle units * Make: SAF with disc brakes approx. 370 x 45 mm * ABS * 10-hole wheel connection, centered, ET120 Ncjdpfx Ahswt Iyljget * Total air suspension stroke approx. 310 mm (raising approx. 220 mm, lowering approx. 90 mm) * Air suspension control via hand lever with stop function Lift Axle: * 1st and 3rd axles liftable automatically, additionally switchable via controls on the chassis frame or via PIN 12 of the lighting socket Tyres: * 6x, 445/45R19.5, on 14.00x19.5 rims, 10-hole ET120 fitted Mudguards: * According to EU standards, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Make: Wabco * Dual-line brake system according to EU standards, with EBS and automatic load sensing * Spring actuators serving as parking brakes on 2 axles * Interchange-proof coupling heads fixed to the front cross member, without connecting line to the tractor Lighting System: * According to EU standards, 24 Volt, * Multi-chamber rear lights * License plate lights * LED side marker lamps * LED position lamp (white) front and LED lane marker lights on the rear * 15-pin socket as well as 2x 7-pin sockets fixed on the front cross member, no connecting lines to the tractor Load Securing: * 9 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * 8 pairs of folding lashing rings evenly distributed, lashing capacity approx. 2.5 t * 2 pairs of folding lashing rings at vehicle rear, lashing capacity approx. 2.5 t * Drilled holes in outer frame every approx. 500 mm for tie-down straps Stake Pockets: * 16 detachable stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Recesses: * Each side recessed with 8 stake pockets in the outer frame * 4 rows of stake pockets transverse to the loading platform Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame Front Wall: * Enclosed front wall * Storage depot for 16 detachable stakes approx. 100/40 mm * Front wall bolted to head frame Equipment: * 2 wheel chocks with brackets * 2x PVC toolboxes, approx. 600/400/500 mm * Bracket for revolving beacon at rear incl. lamp * 2 LED reversing lights (at rear) * 2 aluminium loading ramps, approx. 1,550 x