Kullanılmış Krauss Maffei Krauss Maffei 500-4000 Cx satın al (18.129)

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2015, Sp12000 Bold-on püskürtme ünitesi, helezon 95 mm Nodponh Rnujfx Aktslb KONTROL - MC6 TEKNİK VERİLER KAPAMA ÜNİTESİ - Helzon 95 mm - Bağımsız kontrol - Bağımsız hidrolik

Koşul: mükemmel (kullanılmış), Üretim yılı: 2014, sıkıştırma kuvveti: 2.500 kN, Donanım: dokümantasyon / kılavuz, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Nljdpexqhfyofx Aktjb Tie bar spacing: 630x630 mm Shot weight: 471 g (PS) Shot volume: 518 cm³ Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 kN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar spacing: 630 × 630 mm 4. Max. opening stroke: 630 mm 5. Mold height (min. / max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Max. injection speed: 120 mm/s Ejector system 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Machine Equipment:_ 1. BluePower servo pump drive system (energy-efficient servo hydraulics) 2. Hydraulic core pull 1× operator side + pressure relief system 3. 8-fold water manifold with solenoid valve shut-off 4. 4-zone hot runner control (ZE 88.5404) 5. MC6 control with 19" touch TFT display 6. PV control for injection speed, holding pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. Energy-saving servo drive system BluePower LRX 150 linear robot (payload

Koşul: ikinci el, Üretim yılı: 2008, çalışma saatleri: 37.200 h, sıkıştırma kuvveti: 160 kN, silindir hacmi: 251 cm³, enjeksiyon basıncı: 2.500 bar, toplam ağırlık: 8.200 kg, vida konveyör çapı: 40 mm, Yük üssü: FCA Pegnitz Teslimat süresi: anlaşmaya göre Nljdpfx Akowd Udlstob Ödeme koşulları: Makineyi devralmadan önce %100, net

Koşul: mükemmel (kullanılmış), Üretim yılı: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety enclosure, and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Movable platen opening force: 98 kN Movable platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Tie bar spacing (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Njdpfxsxqh I Ie Aktolb Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Shot volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tons

Koşul: mükemmel (kullanılmış), Krauss Maffei enjeksiyon makineleri için hidrolik motor. MOS 6500-30-168 Nljdsx Uqv Sopfx Aktob

Koşul: mükemmel (kullanılmış), Üretim yılı: 2010, 1 adet ikinci el enjeksiyon makinesi Üretici: KRAUSS MAFFEI Model: KM500-4300CX Üretim yılı: 2010 Kapanma kuvveti: 500 ton Kolon aralığı: 900 x 900 mm Vida çapı: 90 mm Maks. enjeksiyon hacmi: 2.290 cm³ Parça ağırlığı: 1.777 g/PS Kontrol: MC5 Donanım: 2 adet çekirdek çekici Robot arayüzü 12 bölgeli sıcak yolluk kontrolü Termoregülatör arayüzü Nlodpfx Aox Tbfujktob

Koşul: mükemmel (kullanılmış), Üretim yılı: 2017, Krauss Maffei Injection Moulding Machine KM 350-3000 CX Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with color touchscreen, LED backlighting, and visualization of all running processes (ProcessDesigner). Plasticizing Unit Complete plasticizing unit for thermoplastics with abrasion-proof design, equipped with 80 mm screw diameter, check valve, and open nozzle. TECHNICAL DATA – STANDARD VERSION Clamping Unit Clamping force: 3500 kN Opening force: 221 kN Platen dimensions (H x V): 1060 x 1095 mm Nljdpsy Tp Rlefx Aktjb Tie bar spacing (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum daylight: 1300 mm Ejector stroke: 250 mm Ejector force fwd/rev: 95/49 kN Injection Unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1855 bar Injection volume: 1608 cm³ Shot weight: 1464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticizing capacity: 109.5 g/s Electrical-Hydraulic Equipment Rated pump motor power: 75 kW Installed heating capacity: 36 kW Number of barrel heating zones: 7 Dry cycle time / stroke according to Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 l Dimensions and Weight Net weight incl. control cabinet: 16.3 t Machine dimensions (L x W x H): 7.21 x 2.17 x 2.25 m

Koşul: ikinci el, Üretim yılı: 2006, çalışma saatleri: 1.609 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61008195, sıkıştırma kuvveti: 800 kN, vida çapı: 40 mm, kolonlar arası açıklık: 420 mm, silindir hacmi: 201 cm³, enjeksiyon basıncı: 2.500 bar, enjeksiyon ağırlığı: 183 g, kalıp yüksekliği (min.): 400 mm, ejektör kuvveti: 22.600 N, ejektör stroku: 150 mm, açılma hareketi: 750 mm, toplam uzunluk: 3.960 mm, toplam genişlik: 1.480 mm, toplam yükseklik: 2.020 mm, toplam ağırlık: 3.550 kg, ısıtma kapasitesi: 10,9 kW (14,82 bg), çekiş tipi: Hadraulisch, açık açıklık: 470 mm, alet ağırlığı: 1.000.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully hydraulic CX series provides a particularly compact, efficient, and flexible two-platen machine. The very compact two-platen design with a cantilevered clamp offers generous space for peripheral equipment and optimal accessibility. An efficient and intelligent energy management system with BluePower servo drive further provides a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display and multi-touch functionality CLAMPING UNIT - Clamping force: 800 kN - Maximum die opening force: 55 kN - Clearance between tie bars (h x v): 470 x 420 mm - Mounting platen (h x v): 670 x 670 mm - Mould height min. - max.: [on request] - Maximum opening stroke: 750 mm - Maximum mould opening path: 500 mm - Ejector drive: hydraulic - Ejector stroke: 150 mm - Ejector force forward/back: 23 / 10 kN Nedpfx Akoy Rlmwotslb - Ejector speed forward/back: 760 / 800 mm/s - Maximum mould weight: 1000 kg INJECTION UNIT - Screw diameter / type: 40 mm / standard (customization possible) - Effective L/D ratio: 20 - Injection pressure: 1860 bar - Shot volume: 201 cm³ - Shot weight at max. stroke for PS: 183 g - Injection speed: 100 mm/s - Injection flow: 126 cm³/s - Screw drive / speed: 295 rpm - Plasticizing rate (standard): 12.3 g/s - Nozzle contact force: 50 kN ELECTRICAL PARAMETERS - Connected load: 15.0 kW - Installed heating capacity: 10.9 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight with control cabinet: 3.55 t - Length x Width x Height: 3.96 x 1.48 x 2.02 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for the plasticizing cylinder - Open nozzle - One additional temperature control zone for nozzle heating - Air valve single (BWAP) - Pneumatic control for hot runner shut-off, single - Hydraulic core pull, single (BWAP) - Euromap interfaces for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression molding function - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2010, çalışma saatleri: 65.850 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61013689, sıkıştırma kuvveti: 2.500 kN, vida çapı: 50 mm, kolonlar arası açıklık: 630 mm, silindir hacmi: 432 cm³, enjeksiyon basıncı: 2.304 bar, enjeksiyon ağırlığı: 393 g, Donanım: dokümantasyon / kılavuz, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine trade. Of course, we are also interested in purchasing well-maintained, currently available used injection moulding machines, model year 2010 or newer. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Information and Advantages for Used Machines From July 1, 2025, used machinery can also benefit from a special annual depreciation of 30%. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as you would for a new machine. Keyword: Growth Booster (§ 7, paragraph 2 EStG-E) Currently in stock and tested at our Hanover warehouse: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control System: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Extras: - 2 x core pullers (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Accumulator for increased injection performance - Fast SK change CX Midrange - Ejection of cooled nozzle plugs - Start handling during mould movement - Start-up circuit - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve for blowing out at BWAP - 12 temperature control zones - Volt-free contact BDE - Process monitoring - Cycle storage - Trend chart – target/actual graph Nodexqhuuepfx Aktelb - PV control - Active backpressure control - Single previous owner – German origin Regular maintenance by manufacturer and previous owner Clamping Unit: Clamping force: 2500 kN / 250 tons Tie-bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Max opening stroke: 820 mm Min mould height: 330 mm Max daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max / 26.3 kN return Injection Unit: Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g (PS) Injection pressure: 2304 bar Electrical Equipment: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, software included. Available immediately from our Hanover warehouse (Germany) or free delivery within Germany against reimbursement of freight costs. The machine is offered tested and operational. The machine is our sole property. The requested machine is available immediately at our Hanover warehouse, offered tested and operational, and can be inspected under power. To inform you about our machines and our company: - We only sell machines purchased from ongoing production, stored at our Hanover warehouse. - All listed machines are inspected and tested before removal. - We do NOT sell insolvency assets and we are NOT intermediaries trading third-party property. - All machines come from successful companies where regular maintenance and servicing are standard. - All machines are available for inspection at our warehouse.

Koşul: ikinci el, Üretim yılı: 1998, çalışma saatleri: 98.806 h, sıkıştırma kuvveti: 40.000 kN, vida çapı: 130 mm, enjeksiyon ağırlığı: 8.100 g, toplam uzunluk: 4.900 mm, toplam yükseklik: 4.200 mm, toplam ağırlık: 255.000 kg, 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year of Manufacture 1998 For sale are two identical injection moulding machines by KraussMaffei, model KM 4000-19000 MC, featuring the MC3F control unit. These machines are especially suited for the production of large plastic components that require exceptionally high clamping force. The systems are fully equipped and include multiple peripheral devices for material feeding and process management. ## Technical Data * Manufacturer: KraussMaffei Nlodpsyt Hy Nefx Akteb * Model: KM 4000-19000 MC * Control system: MC3F * Year of manufacture: 1998 * Machine hours: approx. 98,806 h * Clamping force: 40,000 kN * Max. shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment * Robot interface: KUKA KRC4 * Sequential injection controller: S.I.S.E. IS-Tech * Temperature control units: GWK * Dosing and mixing system: Motan Colormetric * Belt conveyor ## Machines * Machine No. 14 * Machine No. 15 The machines can be purchased individually or as a package. Viewing by appointment.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2011, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 1.600 kN, vida çapı: 50 mm, silindir hacmi: 393 cm³, Clamping Force: 1600 kN Max. Mold Opening Force: 87 kN Moving Platen Drive Force (Opening): 45 kN Moving Platen Drive Force (Closing): 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Distance (H x V): 520 x 520 mm Mold Opening Stroke: 650 mm Min. Mold Installation Height: 300 mm Max. Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force (Forward/Return): 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Shot Volume: 393 cc Shot Weight (PS): 358 g Injection Flow: 177 cc/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electrohydraulic Equipment: Rated Pump Motor Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heater Control Zones: 5 Oil Filling: 489 ltr. Njdpey Nlb Sjfx Aktslb Dimensions and Weights: Space Requirement (approx.): 5.50 x 2.00 x 2.20 m Total Weight: 8200 kg Max. Mold Weight: 1862 kg Accessories: - Oscillation Mounts - BluePower - Servo Pump Drive Additional Equipment: - 1 x Air Valve - 8 x Hot Runner Control Zones - 2 x Core Pulls on Moving Side (BWAP) - 2 x Core Pulls on Fixed Side (FWAP) - Robot Interface as per Euromap 67

Koşul: mükemmel (kullanılmış), Üretim yılı: 2008, sıkıştırma kuvveti: 1.300 kN, vida çapı: 55 mm, silindir hacmi: 523 cm³, enjeksiyon basıncı: 1.904 bar, enjeksiyon ağırlığı: 479 g, kalıp yüksekliği (min.): 300 mm, Clamping force: 130 t Year of manufacture: 2008 Injection weight: 475.9 g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1,904 bar Injection volume: 523 cm³ Injection weight: 475.9 g Clamping force: 130 t Nedpfeynzrpsx Aktelb Platen dimensions: 745 x 745 mm Clearance between tie bars: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Maximum platen distance: 900 mm Weight: 8,000 kg Year of manufacture: 2008 Control system: MC5 Equipment: - Accumulator - Euromap 67 interface - 2 x pneumatic valve - Hydraulic core on moving platen

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2011, çalışma saatleri: 78.454 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 3.000 kN, vida çapı: 60 mm, kolonlar arası açıklık: 630 mm, silindir hacmi: 678 cm³, enjeksiyon basıncı: 2.007 bar, montaj yüksekliği: 330 mm, toplam uzunluk: 6.500 mm, toplam genişlik: 2.200 mm, toplam yükseklik: 2.300 mm, Kapatma kuvveti: 3000 kN Kolon ölçüleri y x d: 630 x 630 mm Plaka boyutu y x d: 995 x 1050 mm Minimum montaj yüksekliği: 330 mm Maksimum plaka aralığı: 1150 mm Nledoyxmz Eepfx Aktob Açılma mesafesi: 820 mm Vidalı mil çapı: 60 mm Vuruş hacmi: 678 ccm Enjeksiyon basıncı: 2007 bar Donanım Makine işleme olmadan Ekran metni Almanca CEE priz 16A Arttırılmış enjeksiyon performansı için basınç akümülatörü Hidrolik çekirdek çekici 2x Makine malzeme hunisi olmadan Seviye ayar elemanları EUROMAP 67 işleme arayüzü İşleme arayüzü Schuko priz 10A Makine boyutları UxGxY: 6,5 m x 2,2 m x 2,3 m Toplam ağırlık: 15000 KG

Koşul: mükemmel (kullanılmış), Üretim yılı: 2015, çalışma saatleri: 25.000 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61024546, sıkıştırma kuvveti: 800 kN, vida çapı: 40 mm, enjeksiyon ağırlığı: 180 g, enjeksiyon sayısı: 1, giriş akımı türü: trifaze, - MC6 kontrol sistemi - APC Nsdeya Eguopfx Aktelb

Koşul: iyi (kullanılmış), Üretim yılı: 1989, Makine Almanya'da bulunmaktadır. Nsdpfx Ajytpcyoktolb

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2010, çalışma saatleri: 54.872 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 2.500 kN, vida çapı: 55 mm, silindir hacmi: 570 cm³, enjeksiyon basıncı: 2.387 bar, toplam uzunluk: 6.500 mm, toplam genişlik: 2.200 mm, toplam yükseklik: 2.300 mm, toplam ağırlık: 15.000 kg, Kilit kuvveti: 2500 kN Kol ölçüsü h x v: 630 x 630 mm Plaka boyutu h x v: 995 x 1050 mm Minimum montaj yüksekliği: 330 mm Maksimum plaka aralığı: 1150 mm Açılma mesafesi: 820 mm Vida çapı: 55 mm Strok hacmi: 570 ccm Enjeksiyon basıncı: 2387 bar Donanım 2x sıcak yolluk için sıcaklık kontrol ünitesi Ekran metni Almanca Nodpfx Aeyv Elwjktslb CEE priz 16A Artırılmış enjeksiyon gücü için basınç akümülatörü + itici veya çekirdek çekme paralel Hidrolik çekirdek çekme 1x Hava valfi 4x Makine malzeme hunisi ile Makine su bataryası ile Makine handlingsiz Hizalama elemanları EUROMAP 12 arayüzü EUROMAP 67 handlings arayüzü USB arayüzü Schuko priz 10A Aşınmaya dayanıklı plastifize ünitesi Makine ölçüleri UxGxY: 6,5m x 2,2m x 2,3m Toplam ağırlık: 15000 kg

Koşul: mükemmel (kullanılmış), Üretim yılı: 2012, çalışma saatleri: 34.000 h, sıkıştırma kuvveti: 800 kN, vida çapı: 45 mm, kolonlar arası açıklık: 420 mm, silindir hacmi: 318 cm³, enjeksiyon basıncı: 2.336 bar, plaka genişliği: 670 mm, plaka yüksekliği: 670 mm, toplam ağırlık: 3.900 kg, Donanım: dokümantasyon / kılavuz, Stok No.: 503569 Üretici: KRAUSS MAFFEI Tip: KM 80-750 CX Kontrol Ünitesi: MC6 Üretim Yılı: 2012 Çalışma Saatleri: 34.000 h Kilitleme Kuvveti: 800 kN Çubuk Aralığı (YxD): 420 x 420 mm Plaka Boyutu (YxD): 670 x 670 mm Min. Kalıp Yüksekliği: 250 mm Maks. Kalıp Yüksekliği: 500 mm Maks. Plaka Aralığı: 750 mm Açılma Mesafesi: 500 mm Vida Çapı: 45 mm Vuruş Hacmi: 318 cm³ Enjeksiyon Basıncı: 2336 bar Donanım Ekran dili Almanca Nedoyvz Izopfx Aktslb Çekirdek çekme hidrolik 1x Makine handling dâhil Makine konveyör bant hariç Makine vakum taşıyıcı/karıştırıcı hariç Tesviye elemanları Handling Teknik Bilgileri Makine tipi: Entegre lineer robot Marka: Krauss Maffei Kontrol Ünitesi: LRX 100 Üretim Yılı: 2012 Taşıma Kapasitesi: 10 kg Çalışma Saatleri: 3.400 h X ekseni: 550 mm Y ekseni: 1.200 mm Z ekseni: 1.500 mm Ekran dili: Almanca Makine ölçüleri UxGxY: 4,5 m x 1,5 m x 2 m Toplam ağırlık: 3.900 kg

Koşul: mükemmel (kullanılmış), Üretim yılı: 2017, çalışma saatleri: 8.000 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61029386, sıkıştırma kuvveti: 2.000 kN, vida çapı: 70 mm, Donanım: dokümantasyon / kılavuz, KraussMaffei 200/1400 CX POL BMC enjeksiyon kalıplama makinesi çok iyi durumda satılıktır. Az çalışma saatine sahip, 2017 üretimi, 2018 yılında devreye alınmıştır. MC6 kontrol ünitesi. Detaylar için lütfen bize e-posta ile ulaşınız! Teşekkürler! Nljdjwz Iv Aopfx Aktsb

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2006, çalışma saatleri: 98.495 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 500 kN, vida çapı: 25 mm, kolonlar arası açıklık: 370 mm, silindir hacmi: 74 cm³, enjeksiyon basıncı: 2.500 bar, enjeksiyon ağırlığı: 59 g, kalıp yüksekliği (min.): 200 mm, ejektör kuvveti: 22.600 N, ejektör stroku: 100 mm, açılma hareketi: 600 mm, toplam uzunluk: 3.500 mm, toplam genişlik: 1.400 mm, toplam yükseklik: 1.910 mm, toplam ağırlık: 3.000 kg, ısıtma kapasitesi: 8,12 kW (11,04 bg), pompa gücü: 11.000 W, giriş akımı türü: trifaze, giriş frekansı: 50 Hz, giriş voltajı: 400 V, Donanım: dokümantasyon / kılavuz, We offer this used KraussMaffei 50-180 CX injection moulding machine, year 2006. KM designation: 50-180 CX International KM size designation: 180 CX/50 Year of manufacture: 2006 Machine serial number: 61009011 Machine weight: 3,000 kg Condition: ready for operation (used) Pump operating hours: 98,495 Automatic cycle operating hours: 83,046 Description: Screw diameter: 25 mm Clamping force: 500 kN Injection volume: 74 cm³ Maximum injection pressure: 2500 bar Shot weight: 59 g Minimum mould height: 200 mm Maximum opening stroke: 600 mm Maximum distance between platens: 600 mm Tie bar spacing: 370 mm Locating ring (injection side): Ø125 mm Locating ring (ejector side): Ø125 mm Ejector force forward/backward: 22.6 kN / 9.9 kN Ejector stroke: 100 mm Machine dimensions (LxWxH): 3,500 x 1,400 x 1,910 mm Machine weight: 3,000 kg Heating capacity: 8.12 kW Pump motor power: 11 kW Mains voltage: 400 V, 50 Hz standard industrial three-phase supply Equipment: documentation Nlsdoyf E Dqopfx Akteb If you have any additional questions or need more information, please send us a message or give us a call.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2006, çalışma saatleri: 102.060 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 1.000 kN, vida çapı: 35 mm, kolonlar arası açıklık: 420 mm, enjeksiyon basıncı: 2.429 bar, kalıp yüksekliği (min.): 300 mm, ejektör kuvveti: 22.600 N, ejektör stroku: 150 mm, açılma hareketi: 600 mm, toplam uzunluk: 4.240 mm, toplam genişlik: 1.510 mm, toplam yükseklik: 2.180 mm, toplam ağırlık: 7.800 kg, ısıtma kapasitesi: 10,97 kW (14,92 bg), pompa gücü: 18.500 W, giriş akımı türü: trifaze, giriş frekansı: 50 Hz, giriş voltajı: 400 V, Donanım: dokümantasyon / kılavuz, We are offering this used KraussMaffei 100-380 CX injection moulding machine, year of manufacture 2006. Plastic Injection Moulding Machine: KM 100-380 CX International size designation: KM 380 CX/100 Year of manufacture: 2006 Serial number: 61009013 Machine weight: 7,800 kg Condition: ready for operation (used) Pump operating hours: 102,060 Automatic operation hours: 87,744 Description: Screw diameter: 35 mm Clamping force: 1,000 kN Injection volume: 154 cc Max. injection pressure: 2,429 bar Shot weight: 59 cc Minimum mould height: 300 mm Max. opening stroke: 600 mm Max. daylight between platen: 900 mm Tie bar spacing: 420 mm Mould side locating ring: Ø125 mm Ejector side locating ring: Ø125 mm Ejector force forward/backward: 22.6 / 9.9 kN Ejector stroke: 150 mm Machine dimensions (LxWxH): 4,240 x 1,510 x 2,180 mm Machine weight: 7,800 kg Heating capacity: 10.97 kW Pump power: 18.5 kW Mains supply: 400V, 50Hz, standard industrial three-phase connection Nlsdpfx Aksyf E Amotob Equipment: documentation If you have additional questions or require more information, please send us a message or call us.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: - Screw diameter: 50 mm - Non-return valve, open nozzle - Nozzle radius: 10 mm - Nozzle opening: 4 mm Technical Data Clamping Unit - Clamping force: 1,600 kN - Mold opening force: 86.4 kN Nedpfxex Thzps Aktelb - Moving platen drive force: - Opening: 44.8 kN - Closing: 37.8 kN - Platen dimensions (H × V): 820 × 845 mm - Tie bar spacing (H × V): 520 × 520 mm - Mold opening stroke: 650 mm - Mold height installation: 300 mm - Platen opening stroke: 950 mm - Ejector stroke: 150 mm - Ejector force: 22.6 / 9.9 kN Injection Unit - Screw diameter: 50 mm - Injection pressure: 1,892 bar - Shot volume: 393 cm³ - Shot weight (PS): 357 g - Screw rotation speed (standard / option): 390 / 490 rpm Electrical-Hydraulic Equipment - Pump motor power rating: 22 kW - Installed heater capacity: 10.97 kW - Number of heating zones (barrel): 5 - Dry cycles (Euromap): 1,600 1/h - Oil tank capacity: 489 l Dimensions and Weight - Net weight with control cabinet: 6.0 t - Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Koşul: yeni, Üretim yılı: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial PC featuring real-time Ethernet technology, equipped with an integrated 21.5" operator panel with color touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 50 mm, with non-return valve and open nozzle. Nozzle radius: 10 mm Nozzle bore: 4 mm Technical Data (Standard Version) Clamping Unit Clamping force: 1600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie-bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Nlodjxdd N Uepfx Aktsb Ejector force front/back: 23 / 10 kN Injection Unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection rate (standard): 177 cm³/s Screw speed (standard): 265 rpm Electro-hydraulic System Pump motor power: 22 kW Installed heater power: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 l Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + drives + parts) Part removal to non-operator side Axes: X axis (from mould): 620 mm, servomotor Y axis (vertical, with motor brake): 1200 mm, servomotor Z axis (cross): 1500 mm, servomotor Dimensions and Weight Net weight (including control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

Koşul: yeni, Üretim yılı: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a color touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical Data (Standard Version) Clamping Unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force front/rear: 58 / 28 kN Injection Unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic System Pump motor power: 45 kW Installed heater power: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 dm³ Linear Robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part removal on operator-opposite side Axes: X-axis (from mould): 900 mm, servomotor Y-axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z-axis (crosswise): — Dimensions and Weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m Nodoxdd Spopfx Aktelb

Koşul: mükemmel (kullanılmış), Üretim yılı: 2010, Krauss Maffei Injection Moulding Machine KM 80-380 CX Year of manufacture: 2010 Clamping unit Clamping force: 800 kN Platen dimensions (H × V): 670 × 670 mm Tie bar spacing (H × V): 420 × 420 mm Mould height (min./max.): 250 mm Maximum opening stroke: 750 mm Nodpfxsxw Upfj Aktolb Injection unit Screw diameter: 40 mm Shot volume: 201 cm³ Shot weight (PS): 183 g Injection pressure: 1860 bar Electro-hydraulic equipment Pump motor power: 15 kW Heater power: 10.9 kW Dimensions and weight Machine dimensions (L × W × H): 4.09 × 1.48 × 2.02 m Weight (incl. control cabinet): 3.55 t

Koşul: mükemmel (kullanılmış), Üretim yılı: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control with color monitor, integrated control panel, and 3 USB ports. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Mould clamping force: 1100 kN Mould opening force: 70 kN Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen size (h × v): 745 × 770 mm Tie bar clearance (h × v): 470 × 470 mm Mould opening stroke: 600 mm Mould installation height: 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw rotation speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Rated pump motor power: 22 kW Nljdpfx Asx Avhyjktjb Installed heater power: 15.62 kW Number of barrel heating zones: 5 Dry cycle rate according to Euromap: 2000 cycles/h Oil tank capacity: 489 l Dimensions and weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m