Kullanılmış Balya Presi Kenbay Brg 1 2005 satın al (83.363)

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2015, çalışma saatleri: 30.143 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 60 t, dolum açıklığı genişliği: 1.100 mm, dolum ağzı uzunluğu: 1.500 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, balyanın ağırlığı: 570 kg, toplam ağırlık: 20.000 kg, yağ tankı kapasitesi: 600 l, son revizyon yılı: 2026, hacim debisi: 800 m³/saat, Teknik Bilgiler, Pres: Üretici: Presona AB, İsveç Model: LP 60 VH1 Üretim Yılı: 2015 Toplam Çalışma Saati: 30.143 saat (Temmuz 2025 itibarıyla) Efektif Pompa Çalışma Süresi: Sadece 6.527 saat (Temmuz 2025 itibarıyla) Preslenen Balya Sayısı: 115.193 balya (Temmuz 2025 itibarıyla) Ön Presleme Kuvveti: 25 t Ana Presleme Kuvveti: 60 t Spesifik Presleme Kuvveti: 73 N/cm² Besleme Kanalı Ölçüsü: 1.500 x 1.100 mm Doldurma Hacmi / Pres Döngüsü: 2,7 m³ Teorik Kapasite: 800 m³/saat Gerçek Çalışma Kapasitesi: 350 m³/saat Balya Ölçüleri: 1.100 x 750 mm Tahrik Gücü: 37 kW Bağlama: 5'li dikey, tam otomatik Dökme ağırlığı 50 kg/m³ olduğunda kapasite: 11 ila 14 t/saat Balya Ağırlığı: 420 ila 570 kg (malzeme türüne bağlı) Hidrolik Yağ Tankı Hacmi: 600 L Traktör ile kurulu presin ölçüleri (U x G x Y): 10.100 x 3.750 x 4.310 mm Yalnızca presin nakliye ölçüleri (U x G x Y): 10.100 x 2.400 x 3.000 mm Makine Ağırlığı (pres): Yaklaşık 20 t Presin Durumu: Pres, atölyemizde kısmi olarak revize edilmiş ve ardından manuel ve otomatik çalışmada test edilmiştir. Gerçekleştirilen Revizyon İşlemleri: - Makine temizlendi, kısmen pası alındı ve kısmen boyandı - Hidrolik yağ tankı tamamen boşaltıldı ve temizlendi Nsdpfx Asy S Rtljktjlb - Yağ ve hava filtreleri değiştirildi, yeni hidrolik yağ eklendi - Pres koçu sökülerek temizlendi - Pres koçunun dört tekerleği söküldü ve yenilendi - Otomatik silindir yağlama sistemi için gres kartuşları yenilendi - Pres odasının tabanındaki kayma rayları çıkarıldı - Alt gövde, kaynakla ilave saclarla güçlendirildi - Yeni HARDOX kayma rayları kaynakla takıldı - Alt tel için makaralı tel istasyonu temizlendi ve işler hale getirildi - Pres kanalının tabanındaki kayma rayları çıkarıldı - Yeni HARDOX kayma rayları kaynakla takıldı - Her iki pres kanal yan duvarı söküldü ve pası alındı - Aşınmış yan duvar sacları kesilerek çıkarıldı - Tüm yan duvarlar yeni aşınma plakalarıyla güçlendirildi ve kaynakla monte edildi - Ana hidrolik silindir sökülüp kontrole tabi tutuldu - Piston mili yenilendi, silindir içi honlandı - Tüm sızdırmazlık takımı yenilendi, basınç testi yapıldı - Dikey iğne sistemi sökülüp temizlendi, tel makaraları bakımı yapıldı - Zincir temizlendi, yağlandı ve gerginliği ayarlandı - Drillomat temizlendi, tel bıçakları, drill* milleri ve drill* parmakları kontrol edilerek gerekli tork ile ayarlandı ve bakımı yapıldı - Makine genel kontrolleri ve periyodik bakımları yapılarak, manuel ve otomatik çalışmada test edilmiştir Notlar: Pres, taşıma bandı ve tel istasyonları olmadan satılmaktadır. Yerinde inceleme randevu ile mümkündür. Teknik bilgiler ve olası hatalar için sorumluluk kabul edilmez. (*Drillomat, Drillerwellen, Drillfinger gibi terimler özgün olarak bırakıldı veya anlamına sadık kalınarak çevrildi. Sektörel terim kullanımı ve bağlama uygunluğunda açıklık için orijinal terim korundu veya ek açıklama yapılabilir.)

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 1996, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 170 t, dolum açıklığı genişliği: 1.020 mm, dolum ağzı uzunluğu: 1.800 mm, balya genişliği: 1.100 mm, balya yüksekliği: 1.100 mm, balyanın ağırlığı: 900 kg, toplam ağırlık: 40.000 kg, yağ tankı kapasitesi: 3.000 l, son revizyon yılı: 2025, hacim debisi: 750 m³/saat, For sale is a used bale press system consisting of a chain belt conveyor for below-floor operation, complete with a feed hopper, a hydraulic pre-compactor with agitator, a MACPRESSE 111A baler, two complete wire feeding frames each with 5 wire spool holders (without wire). Technical data - Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, refurbished in 10/2024 Main press force: 170 t Specific compaction force: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Filling volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, variable length Drive power: 2 x 55 kW Tying: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/hour, depending on material Hydraulic oil tank volume: 3,000 L Transport dimensions (with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight approx.: 40 t Remarks: The baler has been partially refurbished in our workshop and was tested upon completion of the work, see our function video. The system was previously used to compact paper and cardboard from municipal collection. The contract was awarded elsewhere after expiration, so the complete system is now for sale. Full details on the refurbishments carried out and replaced parts can be found in the detailed photo documentation and our offer. All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection is possible by appointment. We accept no liability for the technical data or possible errors. Technical data - Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain Belt Conveyor 1700 mm Year: 2017 Drive power: 7.5 kW Belt speed: 14 m/minute Length of feed belt: 6,900 mm Length of ascending belt: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Height of drive axle above floor: 5,777 mm Side wall height feed belt: 500 mm Side wall height ascending belt: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,500 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Remarks: The chain belt conveyor, built in 2017, was custom-fabricated and newly installed for the last baler installation in the Netherlands. The conveyor is in good, operational condition and therefore was not refurbished. A layout drawing with pit dimensions is available. Scope of delivery: 1 chain belt conveyor, Wagensveld B.V. 1 feed hopper with pre-compactor flaps 1 agitator 1 MACPRESSE baler, type 111A Nodpfx Aksy S Rqwetjlb 2 wire feeding frames with spool holders, without wire 1 operating manual with CE declaration, electrical and hydraulic schematics

Koşul: mükemmel (kullanılmış), Üretim yılı: 2023, çalışma saatleri: 12 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 630207349, HSM V-Press 825 Plus Pro – hardly used, only 16 bales pressed Nlodpfsyy Ddasx Aktjb For sale is an HSM V-Press 825 Plus Pro in exceptionally little-used condition. The machine has only produced a total of 16 bales and is therefore practically as good as new. Ideal for businesses looking for a high-quality baler without paying the price of a new machine.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2002, makine/araç numarası: 290/02, Fonksiyonellik: tamamen fonksiyonel, Ulrich Schöwerling Delta Z50 de luxe – Hydraulische Ballenpresse Die Delta Z50 de luxe, hergestellt von Ulrich Schöwerling Maschinenbau, ist eine robuste, vertikale hydraulische Ballen- und Pressmaschine zur effizienten Verdichtung verschiedenster Industrie- und Abfallmaterialien. Dank ihrer soliden Bauweise, leistungsstarken Hydraulikanlage und einfachen Bedienung eignet sie sich ideal für Lager, Produktionsstätten und Recyclingbetriebe. Die Maschine arbeitet über ein hydraulisches Aggregat, das von einem Elektromotor angetrieben wird. Die Pressplatte bewegt sich vertikal von oben nach unten und gewährleistet eine effektive Verdichtung. Das Design erlaubt das Abbinden der Ballen, was das Handling und den Transport der fertigen Ballen erleichtert. ⚙️ TECHNISCHE DATEN • Hersteller: Ulrich Schöwerling Maschinenbau (Deutschland) • Modell: Delta Z50 de luxe • Maschinen-Nr.: 290/02 • Maschinentyp: Vertikale hydraulische Ballenpresse • Stromversorgung: 400 V Nlodpfx Aoyghhhektjb • Frequenz: 50 Hz • Stromaufnahme: 16 A • Motorleistung: 8 kW • Maschinengewicht: ca. 850 kg • Zertifizierung: CE-konform Typische Anwendungen: Papier, Karton, Folien, Textilien und andere komprimierbare Industrieabfälle

Koşul: işlem için hazır (kullanılmış), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Feeding height: 1110 mm Feed opening (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed material: film, mixed paper, cardboard, punching scrap, textiles, Big Bags, polystyrene HSM V-Press 860 Plus baler, year 2013-2015, price: €8,000 HSM V-Press 860 L baler, year 2015, price: €9,000 HSM V-Press 860 Plus baler, year 2019, price: €9,000 Nlsdera Rbgepfx Aktsb HSM V-Press 860 Plus baler, year 2024, price: €10,000 HSM V-Press 860, new, ex-demo, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data: Dimensions (L x W x H): 1213 x 1824 x 2987 mm Feed opening (mm): 1200 x 565 Cycle time (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 Plus B baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Power: 4 kW Fill opening (W x H): 1500 x 651 mm Bale dimensions (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Material to be pressed: film, cardboard Idle cycle time: 25 s

Koşul: iyi (kullanılmış), Strautmann AutoLoadBaler Baler Baler suitable for: - Cardboard - Foil - PET bottles Nljdpjv Aktnefx Akteb - Foam - Cans - Electronic waste Machine dimensions (L / W / H): 2047 / 2179 / 2950 mm Feed opening approx.: 1192 mm / 575 mm Bale size (L / W / H): 1200 / 800 / 1100 mm Bale weight approx.: 480 kg Press force: 530 kN Year of manufacture: 2017-2018

Koşul: iyi (kullanılmış), Marka: BRAMIDAN Model: B3 Genişlik (cm): 94 Derinlik (cm): 72 Yükseklik (cm): 198 Ağırlık (kg): 310 Güç (kW): 1,1 Voltaj (V): 230 Kabin genişliği (cm): 70 Kabin derinliği (cm): 50 Kabin yüksekliği (cm): 110 Üretim yılı: 2010-2015 Basma kuvveti (t): 3 Gürültü seviyesi (dB): 69 Fiyat: 2000 EUR B5 - Büyük kutular için ideal: Yüksek verimlilik – yüksek performans Balyalar otomatik olarak çıkarılır Kayış makaraları ön kısımda, kayış değişimi kolaylığı Karton balya ağırlığı (kg): 80-110 Nsdev Akr Ropfx Aktelb Plastik folyo balya ağırlığı (kg): 90-130 Balya boyutu (GxDxY, mm): 1000 x 700 x 800 Basma kuvveti (t): 5 Güç kaynağı: 1x230V 50Hz 10A Motor (kW): 1,1 Gürültü seviyesi (dB): 65-68 Ortalama çevrim süresi (sn): 33 Boyutlar (GxDxY, mm): 1360 x 895 x 2370 Ağırlık (kg): 600 Besleme ağzı genişliği x yüksekliği (mm): 1000 x 500 Üretim yılı: 2014-16, fiyat: 3800 EUR

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 30.408 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 50 t, dolum açıklığı genişliği: 1.250 mm, dolum ağzı uzunluğu: 1.100 mm, balya genişliği: 1.100 mm, balya yüksekliği: 720 mm, balyanın ağırlığı: 550 kg, toplam ağırlık: 16.000 kg, yağ tankı kapasitesi: 600 l, güç: 22 kW (29,91 bg), son revizyon yılı: 2025, hacim debisi: 530 m³/saat, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 units (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under working conditions: 260 m³/hour Feed opening dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying system: 5-fold vertical, fully automatic Throughput rates at a bulk density of: – 30 kg/m³: 6 to 7 t/hour – 50 kg/m³: 7 to 9 t/hour – 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis External transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has undergone partial refurbishment and general maintenance in our workshop. After completion of the overhaul, the baler was tested in operation and is available for short-term sale. The following refurbishment works were performed: General works: – Machine cleaned, derusted, primed, and partially painted – Wire entry marks in the press channel guides welded and smoothed Hydraulic unit: – Hydraulic oil tank completely drained, tank cleaned, new oil filled – Oil filter and air filter replaced – Leaking oil sight glass on hydraulic oil tank replaced – All hydraulic hoses replaced Electrical system: – Language changed to English in the program menu – Two key switches on the operator panel replaced – Control cabinet replaced – Signal lamp on control cabinet replaced – Flap limit switch replaced – Electrical components of the agitator renewed, connected, and tested Press ram: – All four press ram rollers removed and replaced – Main hydraulic cylinder dismantled, overhauled: cylinder tube honed, full seal kit replaced, leakage test performed – All plastic wear pads on the press ram replaced Pre-press flap: – Both bearings on the pre-press shaft replaced – Both hydraulic cylinders dismantled, overhauled: cylinder tubes honed, full seal kits replaced, leakage tests performed – Scraper flap on the pre-press replaced Nsdpfx Aksy R Npijtolb Tying system: – Two complete needles with wire deflection rollers replaced – Needles adjusted and set – All wire deflection rollers in the needle heads replaced – Twister finger replaced – Two twister shafts replaced – All eight wear plates on the twister unit, below the twister fingers, replaced Scope of delivery: Only the baler itself is for sale. Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is complete. Inspection available by appointment. We assume no liability for technical details or possible errors.

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2007, çalışma saatleri: 13.209 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 50 t, dolum açıklığı genişliği: 1.250 mm, dolum ağzı uzunluğu: 1.050 mm, balya genişliği: 100 mm, balya yüksekliği: 700 mm, balyanın ağırlığı: 500 kg, toplam ağırlık: 8.500 kg, yağ tankı kapasitesi: 400 l, güç: 15 kW (20,39 bg), son revizyon yılı: 2026, hacim debisi: 108 m³/saat, Technical Data - Baler: Manufacturer (as per nameplate): BRAMIDAN (original manufacturer: Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March 2026) Number of bales produced: 23,379 pcs Pressing force: 50 t Specific pressing force: 650 kN/m² Feed chute dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total power consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: - 30 kg/m³: approx. 3.1 t/h - 60 kg/m³: approx. 4.5 t/h - 100 kg/m³: approx. 7.2 t/h Bale weights at approx. 1.2 m bale length: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 L PLC control: Siemens S7-200 Effective transport dimensions (excl. baler): 6850 x 1950 x 2650 mm (L x W x H) Transport weight (baler): 8.5 t Condition of the baler: Nljdpfoy R Npcjx Aktob The baler was previously in production use exclusively for compacting cardboard and was regularly serviced. With only 13,209 operating hours, the machine has comparatively low usage. The baler has been partially overhauled in our workshop and thoroughly tested. The following overhaul work has been carried out: - Machine cleaned - Bale retention device made operable and lubricated - Light barrier replaced - Twister unit fully disassembled, cleaned, all bearings replaced, all plastic guides replaced, lubricated, chain tension adjusted - Knives and counter-knives removed, sharpened, reinstalled - Knife gap reset - General maintenance and lubrication performed Scope of delivery: - 1 baler unit with wire spool boxes, without wire (6850 x 1950 x 2650 mm) - 1 bale chute (5100 x 1150 x 450 mm) - 1 wire spool box for floor mounting (1450 x 380 x 360 mm) A tautliner with an effective internal height of 2700 mm is required for transport of the baler. Remarks: The complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection is possible by appointment. No liability is assumed for technical details or possible errors.

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2009, çalışma saatleri: 22.029 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 80 t, dolum açıklığı genişliği: 1.400 mm, dolum ağzı uzunluğu: 1.100 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, balyanın ağırlığı: 600 kg, toplam ağırlık: 16.000 kg, güç: 75 kW (101,97 bg), son revizyon yılı: 2025, hacim debisi: 300 m³/saat, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours (as of December 2025) Nodpfsy R Nnfjx Aktelb Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), variable length Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights with a bale length of approx. 1.2 m: up to 600 kg (material-dependent) PLC: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport dimensions of press: 8,500 x 2,450 x 2,950 mm (L x W x H) Transport weight of press: 16 t Special Equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting ‘difficult’ materials and loose bulk goods of small particle size - Control cabinet air conditioning - Machine base elevation: 200 mm Note: The machine has been serviced and partially overhauled in our workshop. The baler was subsequently subjected to machine tests in both manual and automatic modes. See the functional test video for details. Scope of supply: 1 x Avermann baler, Type AVOS 1410-45/80 (8,500 x 2,450 x 2,950 mm) 1 pallet with safety grids and small parts (1,400 x 600 x 1,250 mm) 1 x floor wire feed frame on double-T beams (1,900 x 1,750 x 2,550 mm) 1 x wire feed frame above the press channel (2,300 x 2,300 x 2,150 mm) 1 pallet with 8 wire spool stands, without wire (1,300 x 850 x 1,000 mm) 1 pallet with 4 wire guide units (2,200 x 800 x 380 mm) 1 pallet with one bale chute (4,000 x 1,300 x 650 mm) 2 x bale guide plates (1,150 x 1,450 x 150 mm) To transport the machine with all add-on parts, a mega liner with an effective internal height of 3,000 mm is required. Remarks: Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2011, Fonksiyonellik: tamamen fonksiyonel, For sale here is an ANIS ATS 110-75S-9CT-30kW baler including cross-tying (9-fold strapping). The baler is in good technical condition and has only been used occasionally. PRESS DIMENSIONS - Total length: 9,700 mm - Total width: 3,700 mm - Transport width: 2,300 mm - Height including hopper: 3,640 mm - Total weight approx.: 24 t - Floor pressure approx. 5 kg/cm² - Heaviest part of the machine weighs approx. 6 tons HOPPER OPENING - Length: 1,600 mm - Width: 1,200 mm - Inspection door (glass) PRESS CHAMBER - Ram stroke length: 2,600 mm - WxH: 1,100 x 770 mm - Volume: 2.2 m³ - The ram runs on solid rollers and is equipped with knives to cut off residual material. - The pressure application to the press chamber (channel) is achieved by two lateral cylinders and a simple lever system, ensuring regular and uniform force distribution. HYDRAULIC SYSTEM - E-motor: Siemens 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher): Constant/displacement: 320 / 400 bar - Max. working pressure: 290 bar - Denison hydraulic valves: 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil capacity: 600 L - Max. pressing force: 740 kN / 74 t - Specific pressure: 87 N/cm² SYSTEM OUTPUT - Volume per pressing operation including pre-compression: 1.76 m³ - Average cycle time per press cycle approx. 40+8 sec. - Cycle time per press cycle without material: 22+8 sec. - Tying time: 30 sec. Nsdpfx Aoy Ayiqjktslb - Theoretical volume without tying: 1.84 m³/h - Average working volume: 123 m³/h - Capacity with material density of 30 kg/m³: 3-4 t/h BALES - Bale length: 500 - 2,000 mm - Bale width: 1,100 mm - Bale height: 770 mm

Üretim yılı: 2024, Koşul: mükemmel (kullanılmış), Press brake UKB - Type 1 Radius MACH-ID 9336 Manufacturer: UKB Model: Type 1 Radius Year of manufacture: 2024 Segmented radius upper tools for 1000-tonne and 2000-tonne machines Complete sets, segmented at 835 mm and 10 segments for processing up to 8000 mm Radii: Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 / Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Nlodpfsx Sxukjx Aktjb Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. While all details are given in good faith, accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend that you verify all critical details.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2015, çalışma saatleri: 20.331 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 100 t, dolum açıklığı genişliği: 970 mm, dolum ağzı uzunluğu: 1.800 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, balyanın ağırlığı: 750 kg, toplam ağırlık: 33.000 kg, Good day, We are pleased to offer you, without obligation, a pre-owned complete bale press line consisting of an HSM baler, type VK 8818 R-FU, including conveying equipment and wire tying stations. The following technical data has been taken from the manufacturer's operating manuals and brochures. We cannot guarantee the accuracy or completeness of this information. Technical Data Balepress: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales produced: 29,020 bales (as of September 2025) Nledpoyz Af Eofx Aktjb Main press force: 1,000 kN Specific pressing force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed hopper dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm (length adjustable from 600 up to 2,000 mm) Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput: Bulk density 20 kg/m³: 12.86 t/hour Bulk density 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Control panel: Siemens TP 700 Press dimensions: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyors: 35,000 x 8,480 x 7,745 mm (L x W x H) Press weight: approx. 33 t (main press approx. 12 t, press channel with bale gripper approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors with equal performance Manual activation/deactivation of the number of wire windings to save tying wire for non-expansive material Cutting edge ejector with 121 kN press force Wire break and end sensor monitoring with automatic press shutdown Bale slide Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition, regularly cleaned, lubricated, and serviced weekly by the operator as per manufacturer's instructions. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year built: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Incline belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Effective width: 1,638 mm Total conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirection stations - Wire reel trolleys (without wire reels) - Stadler KF 1800 chain belt conveyor - Cross-running sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant is already dismantled, stored, and can be loaded at short notice upon receipt of payment. We would be pleased if this or any of our other presses would be of interest to you. Your service team Mertens & Frowein GmbH

Koşul: işlem için hazır (kullanılmış), Hsm 155 VL balya makinesi Balya boyutları U x G x Yükseklik: 1100 x 700 x 700 - 950 mm Balya ağırlığı: 2000 – 250 kg (Karton) Teknik veriler: U x G x Y: 1470 x 940 x 2259 / 2439 mm Ağırlık: 950 kg Presleme kuvveti 16 ton Güç kaynağı: 400 V (üç faz) Motor gücü: 4 kW Balya çıkarıcı Nodpfjra Nrmox Aktslb Hsm 155.1 VL balya makinesi basma kuvveti 18 ton Hsm 155.1 VL balya makinesinin fiyatı - 2600eur Balya Makinesi Hsm 155,2 vl presleme kuvveti 16 ton HSM 155,2 vl balya makinesinin fiyatı - 2800eur

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2013, Marka: HSM Model: V-Press 1160 plus Nledpfx Aksy Uimvsteb Üretim yılı: 2013 Pres baskı kuvveti: 532 kN Voltaj: 400 V Maksimum balya ağırlığı: 550 kg'ye kadar (malzemeye bağlı olarak) Balya ölçüleri: 120 x 110 x 120 cm Makine ağırlığı: 2403 kg Makine ölçüleri: 180 x 157 x 298,5 cm Dolum ağzı ölçüsü: 119,5 cm × 65 cm Durum: çok iyi! Çalışan makinenin videosu talep üzerine sunulabilir.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2008, Marka: HSM Model: V-Press 1160 plus Üretim yılı: 2008 Presleme kuvveti: 532 kN Njdjy Uil Espfx Aktslb Voltaj: 400 V Maksimum balya ağırlığı: 550 kg'a kadar (malzemeye bağlı olarak) Balya ölçüleri: 120 x 110 x 120 cm Makine ağırlığı: 2403 kg Makine boyutları: 180 x 157 x 298,5 cm Dolum açıklığı boyutu: 119,5 cm x 65 cm Video veya daha fazla bilgi için lütfen iletişime geçin.

Koşul: ikinci el, Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 230 V, giriş akımı: 10 A, toplam ağırlık: 550 kg, gürültü seviyesi: 67 dB, güç: 1,1 kW (1,50 bg), giriş frekansı: 50 Hz, 2017 model, ikinci el Bramidan BS W balya presini sunuyoruz. Seri numarası: PVB384139 Model: BS W Üretim yılı: 2017 Nominal voltaj: 1 x 230 V Frekans: 50/60 Hz Akım: 10 A Güç: 1,1 kW Ses seviyesi: 67 dB Nedpfx Aey Tvczoktelb Ağırlık: 550 kg Sorularınız varsa veya daha fazla bilgi isterseniz, bize mesaj yazabilir ya da bizi arayabilirsiniz.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2004, Fonksiyonellik: tamamen fonksiyonel, dolum açıklığı genişliği: 920 mm, dolum ağzı uzunluğu: 1.600 mm, Merhaba, tamamen çalışır durumda olan bir Paal Comdec kanal balya makinesini satıyorum. Makine düzenli olarak bakımı yapılmıştır ve çok iyi teknik durumdadır. Makine, bantlı konveyör ile birlikte satılmaktadır. 2025 yılında konveyör bandı değiştirildi. Nlsdpsyk Uzpjfx Aktsb

Koşul: iyi (kullanılmış), Üretim yılı: 1981, Fonksiyonellik: tamamen fonksiyonel, Donanım: dokümantasyon / kılavuz, Otomatik kanal presi BOA Continu 25 LB + bant konveyör. Pres iyi durumda ve düzenli olarak bakımı yapılmıştır. Yakın zamanda Denison pompası tamamen revizyondan geçirilmiştir. Sürekli kullanımda, çalışır durumdadır. İletişime geçmekten çekinmeyin. Nlsdpfsw S Tv Ujx Aktsb

Koşul: işlem için hazır (kullanılmış), Bramidan 4-0F Motor: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 mm Bale weight: 200–250 kg Pressing force: 18 tons Weight: 1580 kg The device is used for reducing the volume of waste such as film, paper, etc. Price: 4,500 EUR Aventek MK 2500 Baler This is an industrial baler for compressing waste such as: - Film - Cardboard / Waste paper - Plastics Nlodpfxjv Ai Uqo Akteb Pressing force: 25 tons Bale weight: up to 400 kg (depending on the material) Bale dimensions: approx. 1200 × 800 × 800 mm Cycle time: approx. 50 s Power supply: 400 V Motor power: approx. 5.5 kW Year: 2013 Price: 6,500 EUR ORWAK 9020 Baler: - Motor: 2.2 kW - 380 V - Pressing force: 20 tons - Bale dimensions: 1100 x 700 x 800 mm - Bale weight: depending on material 200–300 kg Price: 5,500 EUR

Koşul: yenilenmiş (kullanılmış), balya uzunluğu: 1.200 mm, balya genişliği: 700 mm, balya yüksekliği: 800 mm, balyanın ağırlığı: 380 kg, Baskı makinesi mükemmel durumda, revizyondan sonra kullanılmamıştır. Bakımları sadece üretici firma tarafından yapılmıştır. Durumu kusursuzdur. Tam otomatik çalışmaktadır. Kiriş uzunluğu 600-1200 mm arasında ayarlanabilir. 15 kW motor. 2007 model. Balya ağırlığı yaklaşık 380 kg. Nljdpfex S Sbdox Aktsb

Koşul: ikinci el, Üretim yılı: 2008, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: V302591-20, presleme kuvveti: 130 t, dolum açıklığı genişliği: 1.620 mm, dolum ağzı uzunluğu: 972 mm, balya genişliği: 1.100 mm, balya yüksekliği: 1.100 mm, toplam ağırlık: 41.000 kg, basınç: 280 bar, yağ tankı kapasitesi: 2.450 l, güç: 150 kW (203,94 bg), BOA Impress D130 B 110 with side tying – Used baler, professionally maintained Are you looking for a powerful, reliable baler available immediately? Then this BOA Impress D130 B 110 with side tying is an excellent opportunity. We acquired this baler as a trade-in machine. The previous owner, a customer in England, relied on this BOA for years and has now chosen a new BOA installation. This demonstrates the high level of trust in the machine, the brand, and the accompanying service. The baler has been maintained throughout its entire period of use by our own BOA service team in England. This maintenance was always carried out with great care, providing the machine with a documented service history. The baler was decommissioned while operating and is currently in our warehouse, available for inspection. The machine will undergo a technical check-up before delivery. Any required parts will be replaced by our team, ensuring the baler is offered in optimal condition. Why this BOA D130 B is an attractive option The BOA Impress D130 B 110 is a heavy-duty industrial baler with high compaction force, designed for intensive operation and high capacity. Thanks to its side tying system and robust construction, this baler is the ideal solution for companies looking to process large volumes of material efficiently. Technical specifications Type: BOA Impress D130 B-5V-1.6 Version: D130 B 110 with side tying Hydraulic power: 110 kW Main pumps: 2 × 55 kW Back pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 litres Compaction force: 1,266 kN / 126 tons Specific pressure: 10.5 kg/cm² Stroke length: 2,900 mm Channel dimensions: 1,100 × 1,100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approx. 1,400 mm Bale weight: up to approx. 1,200 kg, depending on material Number of tying wires: 5 vertical / 5 horizontal Filling hopper: 1,620 × 972 mm Machine weight: approx. 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our warehouse and can be viewed by appointment. As it is a trade-in machine, decommissioned in working order and maintained by our own service team, we can provide a comprehensive overview of its technical condition and maintenance history. Nedpoy Tnzcofx Aktjlb A robust used BOA baler with a documented background, professional service record, and a pre-delivery technical check-up.

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2022, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 130 t, dolum açıklığı genişliği: 1.620 mm, dolum ağzı uzunluğu: 972 mm, balya genişliği: 1.100 mm, balya yüksekliği: 720 mm, toplam ağırlık: 43.000 kg, garanti süresi: 6 aylar, basınç: 280 bar, yağ tankı kapasitesi: 2.450 l, güç: 110 kW (149,56 bg), son revizyon yılı: 2026, This Impress D130-A-110 kW is in like-new condition and has been fully refurbished. The press has been completely rebuilt, with nearly all components replaced by new parts. Only the frame and a few mechanical components remain from the original assembly. The main cylinder has been completely overhauled. Additionally, all electrical components and the entire hydraulic control system have been replaced with new parts. The control cabinet is also brand new, ensuring maximum reliability, safety, and operational security. Nljdpfxoy Tm H Re Akteb The standard configuration of this machine features horizontal tying. Thanks to the prepared frame, this baler can also be supplied, upon request, with both horizontal and vertical tying, making the machine flexibly deployable for different material streams. Applications Paper and cardboard, mixed streams, plastic films, PET bottles, containers, (long) agricultural films, plastic tanks, car tires and bumpers, and much more. As you are accustomed to from BOA, this pre-owned machine can also be supplied with technical support, spare parts supply, and expert advice.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2015, Marka: HSM Model: V-press 860 plus Üretim yılı: 2015 Pres basıncı: 418 kN Nodpfxsy Tlvde Aktjlb Voltaj: 400 V Maks. balya ağırlığı: 480 kg (malzemeye bağlı olarak) Balyanın ölçüleri: 120 x 120 x 78 cm Makinenin ağırlığı: 2083 kg Makine ölçüleri: 180 cm x 125 cm x 298,5 cm Doldurma ağzı ölçüleri: 120 cm x 65 cm Çalışır durumdaki makinenin videosu talep üzerine sunulabilir.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2022, Kâğıt, karton, folyo, plastik ve diğer geri dönüştürülebilir organik materyaller için balya pres makinesi. Üretici: HSM Model: V-Press 825 plus pro - TCS sistemi (TorsionControlSystem) – plakanın paralelliğini kontrol eder Nsdpfxoyyy Dpj Aktolb - Kapak kapandığında otomatik başlat/durdur - Ekran + balya ve çalışma saati sayacı - Manuel bağlama (4 polyester kayış) - El çarklı, sürgülü kapı kilitleme sistemi Makine boyutları: 1700 x 1250 mm, yükseklik: 2370 mm Yükleme ağzı: 1195 x 540 mm Balya ağırlığı: yaklaşık 280 kg'ya kadar Balya ölçüleri: yaklaşık 1200 × 780 × 700 mm Kapasite: yaklaşık 2–5 balya/saat Üretim yılı: 2022 Presleme kuvveti: 250 kN Motor gücü: 4,0 kW Makine ağırlığı: 1200 kg