Kullanılmış Berg & Schmid Vks 370 Va Cnc satın al (15.353)

Koşul: yeni, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangle 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw band dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Bwsdpfx Aped Iipmevsn Space required approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to angled cut, feed control & cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (easy cleaning) • Energy-saving and low vibration thanks to angled cut • Ergonomic, safe, free-standing control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid downfeed until material is detected or, for serial cuts, cut immediately 4. Stop saw blade 5. Raise frame to just above the material 6. Vice opens

Koşul: yeni, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw blade length: 4250 x 34 x 1.1 mm Bwodpfxjfgyice Apvsn Blade speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cuts left and right up to 60° without machine conversion · 34 mm saw blade width · Large, ball-bearing mounted rotary material support table · Saw blade guides positioned via extra-wide linear guideway · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed rollers · Removable chip tray (for cleaning/disinfection) · Freestanding, safe, and ergonomic control panel · Storage for blades and consumables · Cutting pressure regulator, feed rate controller · Fully hydraulic vise · Quick clamping (front loading) · Material height sensor (automatic cut start recognition) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material edge or direct cutting for serial cuts 4. Switch off saw blade 5. Raise frame just above material 6. Open vise Optimal, material-independent cutting results via fine adjustment of the saw frame using: * Pressure control valve (cutting pressure/power) * Feed rate control valve (speed) * Clearly labeled switch with pictogram, easy and intuitive operation

Koşul: yeni, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 500 x 310 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL PRICE!!! 2-column double miter bandsaw K-tech DG 50/33 HA-I • 2-column miter saw • Robust, yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to miter cut, feed regulator + cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (disinfection) • Energy-efficient and low vibration due to miter cut • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure regulator valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Bwjdsfg E Hljpfx Apvon Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to material start or for series cuts begin cutting immediately 4. Saw blade off 5. Raise frame to just above the material 6. Open vise

Koşul: yeni, 90°'de kesme alanı: yuvarlak 305 mm 90°'de kesme alanı: kare 260 mm 90°'de kesme alanı: dikdörtgen 350 x 200 mm Testere şeridi uzunluğu: 3375 x 27 x 0,9 mm Bant hızı: 37 + 74 m/dak Tabla yüksekliği: 940 mm Toplam güç ihtiyacı: 1,5/1,8 kW Makine ağırlığı yaklaşık 0,61 t Alan ihtiyacı yaklaşık 1,5 x 1,75 x 1,9 m Çift açılı metal şerit testere AutoCut fonksiyonlu - 60° sola, 45° sağa açılı kesim - Bilyalı yataklı döner tabla - Yana kaydırılabilir mengene - Sağlam, geniş malzeme desteği - Otomatik soğutma Bodjfd Abaepfx Apvswn Görüntü yarı otomatik modeli göstermektedir.

Koşul: yeni, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirements: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, Frequency inverter, Hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cutting left 60° and right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece: very quiet operation with minimal vibration • Hydraulically actuated vice, laterally adjustable • Guided, high-quality industrial bearings • Solid vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Cutting pressure/feed regulator • Support roller (infeed side) • Ball-bearing turntable Bwjdpfxsfn Ando Apven Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast downfeed to material start or, for series cuts, commence cutting immediately 4. Stop saw band 5. Raise frame to just above the material 6. Open vice

Koşul: yeni, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangle 820 x 610 mm Saw blade length 5850 x 41 x 1.3 mm Blade speed 15 – 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.45 t Space requirements approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Bwodpsfgyifofx Apven Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping takes place vertically on both the infeed and outfeed sides. From the K-tech 800 H model onward, the machine is equipped as standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly “B&S Clean Cut cutting system” with minimum quantity lubrication, reducing cleaning effort and conserving resources. CNC control A CNC controller allows for the programming of up to 90 cutting programs with different cut lengths, quantities, and miters. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” that are hydraulically operated. This ensures safe gripping and handling of materials and bundles that may deviate slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, a ground rack, and a frequency-driven, robust gear motor.

Koşul: yeni, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangle 1250 x 600 mm Saw band length: 8140 x 54 x 1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space requirement: approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (optional), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping is vertical on both infeed and outfeed sides. From the K-tech 800 H onwards, the machine is equipped as standard with an additional horizontal vice. The interaction of the hydraulic saw frame lowering, material positioning, and pusher system is CNC-controlled. Bsdjfgyigepfx Apvswn The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" featuring minimum quantity lubrication. This reduces cleaning requirements and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher-, feed- and positioning system is equipped with "double-sided opening grippers" which are hydraulically driven. This ensures secure gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is a standalone unit guided by ball-bearing linear rails, a ground rack-and-pinion system, and a robust, frequency-controlled gear motor.

Koşul: yeni, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Bwsdpfefg E Hmox Apvjn Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column twin mitre band saw for fast cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved through the new “B&S positioning system”. An intelligent NC control ensures smooth coordination between linear encoder and self-braking positioning motor, in combination with a reliable hydraulic brake and large-radius central positioning. The work table is mounted using high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control A CNC system allows programming of up to 90 cutting programs with different cut lengths, batch quantities, and mitre angles. Dual-sided clamping positioning system The B&S pusher system, feed and positioning unit, is equipped with “dual-sided hydraulic clamping grippers”. This ensures secure handling and transportation of materials and bundles, even if they deviate slightly from the ideal form. The pusher system is a separate construction, guided by ball-bearing linear rails, precision ground rack, and a frequency-driven, heavy-duty geared motor.

Koşul: yeni, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangular 1250 x 600 mm Cutting range at 45°: round 680 mm Cutting range at 45°: square 600 mm Cutting range at 45°: flat 870 x 600 mm Cutting range at 60°: round 580/550 mm Cutting range at 60°: square 530/450 mm Cutting range at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total connected load 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column dual-miter band saw for fast cutting with pusher system P15 (optionally P30) Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Highest positioning accuracy is achieved by the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, coupled with a reliable hydraulic brake via large-radial center positioning. The work table is supported by high-quality preloaded bearings to ensure exceptionally smooth rotation. CNC control Bwodofg E Hnjpfx Apvon A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and angles. Dual-sided gripping positioning system The B&S pusher system, feeding and positioning system, is equipped with “dual-sided opening gripping tongs” that are hydraulically operated. This ensures secure gripping and transport of materials and bundles, even those slightly deviating from the ideal shape. The pusher system is mounted separately and guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust geared motor.

Koşul: yeni, 90 derecede kesim alanı: yuvarlak 105 mm 90 derecede kesim alanı: kare 100 mm 90 derecede kesim alanı: dikdörtgen 100 x 105 mm Bedefv Aq Rspfx Apvewn Şerit testere ölçüleri: 1335 x 13 x 0,65 mm Boyutlar U x G x Y: 650 x 310 x 300 mm Bant hızı: 30 - 80 m/dak Toplam güç ihtiyacı: 0,95 kW Makine ağırlığı yaklaşık 18 kg Kampanya fiyatı!! Berg & Schmid - Montaj şerit testeresi PBS 90 ESC Güçlü ve özellikle sağlam metal şerit testere, alüminyum döküm testere masası ve sürekli ayarlanabilir kesme hızı ile yataya kadar 60° açılı kesimler Nakliye masraf payı: 25,-EUR Görseller aynı PBS 110 modeline aittir.

Koşul: yeni, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise. • The chip conveyor is hydraulically driven and features adjustable speed. • All machine movements (saw frame, vice, feeder, blade guides) are supported by modern linear guides with high static and dynamic load capacities, guaranteeing very low sliding friction. • Another distinctive feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping. • Thanks to the height control of the blade position, the operator can set the blade close to the top edge of the material. After the cut, the blade is automatically raised back to its previous position. Alternatively, the blade can be set to remain in the lower position. During the cutting cycle, the software continuously compares blade load to preset values, and the sawing system can be stopped if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. • The hydraulic unit, including filter and pressure gauge, ensures especially smooth operation at constant pressure. • Precision-ground carbide inserts clamp the saw band, complete with lateral, hardened and adjustable guide rollers. The adjustable blade guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder controlled via the machine software. Tension is automatically released after a preset period when the machine is idle or after a cycle is completed. • Automatic version with CNC control available in X-TECH 900 / 1200 models, with a feed length of 500 mm for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor to enable precise positioning even under maximum load. • All guided movements are supported by four recirculating ball guides with high static and dynamic load capacity; feed friction is greatly reduced. Hardened and ground prismatic guides. Price on request. Bwedpfefg E Hpox Apven

Koşul: yeni, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400 x 250 mm Saw blade dimensions: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double-mitre band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre cut left 60° + right 45° • Industrial-grade hydraulics, high-performance 18 bar • Excellent material accessibility • Ammeter for monitoring - Cutting force optimization - Increased blade service life - Optimized cutting accuracy • Hydraulic vice opens/closes automatically • Swarf removal brush • Ball-bearing material turntable • Movable quick-release vice • Material height sensor (automatic cut start detection) Bedped Iiptofx Apvjwn Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lowering until contact with material, or directly start cutting for batch cuts 4. Stop saw blade 5. Raise frame slightly above material 6. Open vice

Koşul: yeni, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length 2,965 x 27 x 0.9 mm Table height 940 mm Band speed 35 / 70 m/min Total power requirement 1.1/1.3 kW Machine weight approx. 0.35 t Space required approx. 1.3 x 0.8 x 1.5 m Bwedpod Iip Rjfx Apven SPECIAL OFFER!!! Double miter metal band saw, hydraulic, semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable feed pressure regulator - Band speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball bearing rotary table for easy miter adjustment - Quick-release vice, movable - Quick clamping lever - Automatic coolant system Freight charge share €120,-

Koşul: ikinci el, Gönye daire testere BERG & SCHMID tip MKS 350 Yapım yılı yaklaşık 1980 90° yuvarlak Ø 110 mm'de testere aralığı 90° dikdörtgen için testere aralığı 160 x 90 mm 90° kare 95 x 95 mm için testere aralığı 45° yuvarlak Ø 95 mm'de testere alanı 45° dikdörtgen için testere alanı 120 x 90 mm 45° karede 80 x 80 mm kesme alanı Testere bıçağı çapı maks. 350 mm Testere bıçağı hızı 28 ve 56 rpm Motor gücü yaklaşık 1,8 / 2,5 kW kutup değiştirme Şebeke bağlantısı 380 Volt, 50 Hz - Elektrikle değiştirilebilen 2 hıza sahip motor - 45°'ye kadar kademesiz değişken gönye hızlı ayarı - Hızlı açılan eksantrik kollu malzeme mengenesi - Elektrikli soğutma sıvısı pompalı soğutma sıvısı cihazı - Malzeme durdurma 350 mm Bwedpfx Apoquzd Rjvsn - Ø 335 mm entegre testere bıçağı Alan gereksinimi U x G x Y 1250 x 600 x 1200 mm Ağırlık 240 kg iyi durumda

Koşul: yeni, Cutting diameter: 220 mm Bandsaw blade length: 2,455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Bandsaw blade dimensions: 2,455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Bsdpfed Iip Tsx Apvswn Machine weight approx.: 0.24 t Space requirements approx.: 1.2 x 0.6 x 1.7 m SPECIAL PRICE!!! - Mitre cuts up to 60° to the left - Cutting speed 25 - 80 m/min - Vice with quick-clamping device - Carbide blade guides - Blade tension control - Electronic coolant system Auto-Cut System = 3-stage system - Automatic lowering of the saw frame via hydraulic cylinder - Infinitely variable feed rate - With limit switch - Rapid approach lowering of the saw frame from rest position to the workpiece, then switch to normal sawing feed - Manual operation

Koşul: yeni, Saw blade diameter: 300 mm Cutting capacity at 90°: round 102 mm Cutting capacity at 90°: square 90 mm Cutting capacity at 90°: flat 120x80 mm Cutting capacity at 45°: round 90/80 mm Cutting capacity at 45°: square 80/70 mm Cutting capacity at 60°: flat 90x70/85x70 mm Total power requirement: 1.5/2.0 kW Machine weight: approx. 0.135 t Space requirement: approx. 0.5 x 1.05 x 1.0 m The versatile professional metal circular saw. Outstanding in both performance and price. · For mitre cuts to the left up to 45° · Suitable for cutting steel, stainless steel, and, to a limited extent, aluminium profiles · Spindle vice with double clamping arm for burr-free cuts · Cone-type safety clutch to protect the saw blades · 2 speeds: 33 + 66 rpm · Automatic blade cooling · Saw head with double bearing · 24 V safety switch in the handle with restart protection · Length stop, assembly tools · Enclosed cast iron, heavy-duty cast construction · Mitre adjustment on the operator side · Machine base (optional) Bwsdpfx Apjfg Rlajvsn ATTENTION: Price does NOT include saw blade!!! (Saw blade price: €93 / €123)

Koşul: ikinci el, Saw blade diameter: 400 mm Cutting capacity at 90 degrees (round): 110 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (flat): 200 x 60 mm Cutting capacity at 45 degrees (round): 100 mm Cutting capacity at 45 degrees (square): 100 mm Cutting capacity at 45 degrees (rectangular): 140 x 60 mm Total power requirement: 1.5 kW Machine weight: approx. 130 kg Dimensions (L x W x H): 0.8 x 0.7 x 1.3 m SPECIAL OFFER PRICE!! Under-table aluminium circular saw, semi-automatic with hydropneumatic feed. · Service unit for pneumatic control · Ball-bearing rotary table · Extraction port for chip extraction system · 2 pneumatic vertical clamps · Swivel range: 180° · Adjustable rear material stop = extendable cutting area Bsdjd Iinxepfx Apvjwn · Infinitely variable saw blade feed · Two-hand safety control · Horizontal clamps (optional) · Mist spray unit for coolant emulsion · Motor brake · Machine base frame · For profile cuts, the use of our B & S Coolmatic Plus is mandatory · Saw blade (optional)

Koşul: yeni, Baskı 17,0 kN Bwsdofv Avvspfx Apvsn Strok 40 mm Boğaz mesafesi 110 mm Çalışma yüksekliği 70 - 220 mm arası Tabla ölçüsü 190 x 140 mm Mil çapı 30 mm Makine ağırlığı yaklaşık 60 kg Ölçüler (U x G x Y) 310 x 190 mm Dizli pnömatik presler Yan kolu ile açılı dişli üzerinden hassas çalışma yüksekliği ayarı dahil, konforlu ve sorunsuz ayarlanabilir. Dizli pnömatik presler, maksimum baskı gücüne strok sonuna yakın ihtiyaç duyulduğunda kullanılır; örneğin montaj, delme, kabartma, perçinleme vb. işlemlerde.

Koşul: yeni, Pressure: 4.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight approx.: 24 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used for processing long-stroke parts where constant force is required. Outstanding Technology: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with cushioning at both end positions • Double guidance rings on the piston ensure steady and precise motion • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation Bsdpfxofv Av Ss Apvewn • On the PND 85/S, spindle return is performed via a single cylinder chamber for additional air savings • Working height fine adjustment is simple, fast, and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Koşul: ikinci el, Saw blade diameter 530 mm Cutting capacity at 90 degrees: round 180 mm Cutting capacity at 90 degrees: square 170 mm Cutting capacity at 90 degrees: flat 380x70 mm Cutting capacity at 45 degrees: round 180 mm Cutting capacity at 45 degrees: square 150 mm Cutting capacity at 45 degrees: flat 290x70 mm Total power requirement 2.2 kW Machine weight approx. 350 kg Dimensions (L x W x H): 1.1 x 0.9 x 1.5 m Under-table aluminium circular saw, hydro-pneumatic semi-automatic - Maintenance unit for pneumatic control - Turntable with ball bearing - Extraction port for chip extraction system - 2 pneumatic vertical clamps - 180° swivel range - Adjustable rear material stop = enlarged cutting range - Infinitely variable saw blade feed Bwsdpfxod Iinws Apvon - Two-hand safety control - Horizontal clamps (optional) - Micronizer system for coolant emulsion - Motor brake - Machine base frame - For profile cutting, our B & S Coolmatic Plus is required - Saw blade optional

Koşul: yeni, Saw blade diameter: 275 mm Cutting capacity at 90 degrees (round): 90 mm Bwodsd Iipaepfx Apvjn Cutting capacity at 90 degrees (square): 80 mm Cutting capacity at 90 degrees (flat): 100x70 mm Cutting capacity at 45 degrees (round): 75 mm Cutting capacity at 45 degrees (square): 70 mm Cutting capacity at 60 degrees (flat): 80x60 mm Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.12 t Space required: approx. 0.5 x 0.85 x 0.95 m The versatile professional metal circular saw. Impressive in both performance and price. • For mitre cuts to the left up to 45° • Suitable for cutting steel, stainless steel, and, to a limited extent, aluminium profiles • Spindle vice with double clamping arm for burr-reduced cutting • Taper safety clutch made from hardened steel to protect saw blades • 2 speeds: 33 + 66 rpm • Automatic cooling directly to the saw blade • Saw head with double bearing • 24 V safety switch on the handle with restart interlock • Length stop, assembly tools • Enclosed, heavy-duty cast construction • Mitre adjustment from the operator side • Machine base (optional) IMPORTANT: Price does NOT include saw blade!!! (Saw blade price: €70)

Koşul: ikinci el, Saw blade diameter: 350 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 110 mm Cutting range at 90°: flat 200 x 88 mm Cutting range at 45°: round 115 mm Cutting range at 45°: square 110 mm Cutting range at 45°: rectangle 150 x 80 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.27 t Bwjdod Iin Aspfx Apvsn Dimensions (L x W x H): 1.1 x 0.95 x 1.7 m - Hydropneumatic semi-automatic - Mitre cut left/right 45° - Head tilt cuts up to 45° (shiftable) - Ball bearing table - Pneumatic double clamping device - Machine base with mist spray unit - Chip extraction nozzle on saw blade guard

Koşul: yeni, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: from 95 to 240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force over the entire stroke length. They are primarily used when long-stroke components must be processed with constant force. Bwsdefv Awaspfx Apven Advanced engineering features: • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited lifespan • Double-acting cylinders with end-position cushioning on both sides • Double guide rings in the piston ensure consistent and smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return for the PND 85/S only via a single cylinder chamber for additional air savings • Working height fine adjustment is simple, fast, and precise in two stages: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment using the stroke limit ring on the piston rod Additional benefit: Faster cycle times and air savings

Koşul: yeni, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 110 mm Cutting capacity at 90 degrees (flat): 200 x 88 mm Cutting capacity at 45 degrees (round): 115 mm Cutting capacity at 45 degrees (square): 110 mm Cutting capacity at 45 degrees (rectangular): 150 x 80 mm Total connected load: 1.5/1.8 kW Machine weight approx. 0.22 t Dimensions (L x W x H): 0.7 x 0.9 x 1.9 m ATTENTION: SPECIAL OFFER!!! - Mitre cutting left/right up to 45° - Head tilt cuts up to 45° (compound mitre) - Pneumatic double quick-release clamping device Clamping jaws close when lowered - Ball-bearing table - Machine base - High-torque and powerful - High-quality workmanship Bwodpfod Iin Dox Apven

Koşul: yeni, Baskı kuvveti 26,0 kN Strok 60 mm Kol açıklığı 110 mm Çalışma yüksekliği 70 - 250 mm arası Tabla ölçüleri 190 x 140 mm Bsdjfv Avrepfx Apvown Mil çapı 30 mm Makine ağırlığı yaklaşık 46 kg Boyutlar (U x G x Y) 310 x 140 x 475 mm Diz eklem kolu ile çalışan el presleri – KAMPANYA FİYATI!!! HK 2600 strok 60 mm, eğik dişli mekanizması ve yan kol sayesinde çalışma yüksekliği hassas ve kolayca ayarlanabilir. Gövde yüksekliği 475 mm Üretimde ekstra güç harcamadan daha fazla baskı. Diz eklem teknolojisi ile strok sonuna yakın maksimum baskı gücü. Mil kafası ve gövdenin özellikle sağlam yapısı.