Kullanılmış Marquipwardunited Sheet Wizard 1650 4 Roll Stand satın al (72.338)

Durum: ikinci el, Üretim yılı: 2000, Fonksiyonellik: tamamen fonksiyonel, 1x Used Bühler MDDL / MDDK The rollers are worn and can be re-fluted at an additional cost. Hedpfeyudt Nsx Apyonn The complete mill has already been dismantled. Incl. 4x drive motors Spare parts can be supplied at additional cost.

Üretim yılı: 2019, durum: iyi (kullanılmış), 4 tekerlek için Hareketli, frenli tekerleklerle Hjdpfx Apoy Nm Iysyenn

Durum: yeni, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. sheet thickness without pre-bending at D = 5x top roll: 25 mm Max. sheet thickness without pre-bending at D = 3x top roll: 20 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 20 mm Hnjdpfx Ajypbquopyon Max. sheet thickness with pre-bending at D = 5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC control Full hydraulic drive of top and bottom rolls (for bending capacities above 30 mm on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Durum: yeni, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Lease rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity (mild steel): 8 mm Max. sheet thickness without pre-bending at D = 5x top roll: 8 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 6 mm Max. sheet thickness with pre-bending at D = 5x top roll: 6 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom roll (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic adjustment of side rolls with electronic synchronization Hydraulic adjustment of bottom roll with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity Cone length may be max. 30% or must exceed 60% of the roll length Hardened rolls are recommended Hodpfx Apeypbqneyenn

Durum: yeni, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without prebending (mild steel): 12 mm Max. sheet thickness with prebending (mild steel): 8 mm Max. sheet thickness without prebending at D=5x top roll: 13 mm Max. sheet thickness without prebending at D=1.5x top roll: 10 mm Max. sheet thickness with prebending at D=5x top roll: 10 mm Max. sheet thickness with prebending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Lower roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Hnedpfx Apeypbqhoyen Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of the top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Conical bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side plate supports NC Control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Durum: yeni, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Hsdsypbqbjpfx Apyenn Max. bending capacity (mild steel): 13 mm Max. sheet thickness with pre-bending (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 13 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 8 mm Top roll diameter: 240 mm Lower roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC control Fully hydraulic drive of top and lower rolls (from 30 mm bending capacity, all four rolls) via planetary gearbox Hydraulic adjustment of side rolls with electronic synchronisation Hydraulic adjustment of lower roll with mechanical synchronisation Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control console Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS WHEN CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Durum: yeni, Condition: new Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x upper roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x upper roll: 7 mm Max. sheet thickness with pre-bending at D=5x upper rolls: 8 mm Max. sheet thickness with pre-bending at D=1.3x upper roll: 6.4 mm Upper roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Numerical control: Siemens PGS-Classic with touchscreen Cone bending with electronic control and tilting of the lower roll Oil cooler Simultaneous rotation and roll movement Simultaneous roll and support movement Capability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for higher accuracy Infinitely variable speed for roll movement Infinitely variable speed for rotational movement Prepared for retrofit of supports (up to 5 axes) Prepared for retrofit of loading / unloading stations Prepared for retrofit of CNC controls Extra-large, double-hinged swinging bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models starting from 205 mm upper roll diameter) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for the lower rolls (4 large bearings per shaft) Central lubrication system Pressure gauge for constant clamping roll monitoring Extra torque and special brake system Safety trip cable with emergency stop Equipped according to "CE" standards OPTION: Hjdpfeypbp Rsx Apyenn CNC control Siemens PSG-Absolute with 15'' touchscreen (automatic calculation of sequences for simple and complex shapes)

Durum: yeni, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity – mild steel: 15 mm Max. plate thickness without pre-bending at D=5x top roll: 15 mm Max. plate thickness without pre-bending at D=3x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 12 mm Max. plate thickness with pre-bending at D=5x top roll: 12 mm Max. plate thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Lower roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Hnedoypbp Dopfx Apyjn Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive for the top and bottom rolls (for bending capacities from 30 mm on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control console Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Top and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length may be a max. of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Durum: yeni, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Lease rate: €1,056.51 Bending length: 3,100 mm Maximum bending capacity – mild steel: 9 mm Maximum sheet thickness (without pre-bending, D = 5x top roll): 8 mm Maximum sheet thickness (without pre-bending, D = 1.5x top roll): 7 mm Maximum sheet thickness (with pre-bending, D = 5x top roll): 7 mm Maximum sheet thickness (with pre-bending, D = 1.5x top roll): 5 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital position display for bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hsdpsyb Sz Isfx Apyjnn Hydraulic drop-end 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of nominal capacity Cone length must be a maximum of 30% or more than 60% of roll length Hardened rolls are recommended

Durum: yeni, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2550 mm Max. bending capacity – structural steel: 9 mm Max. sheet thickness without prebending at D=5x top roll: 9 mm Max. sheet thickness without prebending at D=1.5x top roll: 7 mm Max. sheet thickness with prebending at D=5x top roll: 7 mm Max. sheet thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4900 mm Width: 1150 mm Height: 1250 mm Weight: 4600 kg 4 rolls Top roll drive by hydromotor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hnsdeyb Sywspfx Apyon Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Durum: yeni, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity - steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Lower roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Hedpoyb Sydsfx Apyonn Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable roller speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum sheet thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Durum: yeni, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - structural steel: 6 mm Max. sheet thickness (without prebending at D=5x top roll): 6 mm Max. sheet thickness (without prebending at D=1.5x top roll): 4 mm Max. sheet thickness (with prebending at D=5x top roll): 4 mm Max. sheet thickness (with prebending at D=1.5x top roll): 3 mm Top roll diameter: 150 mm Hnjdpfsyb Szbjx Apyon Bottom roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, bottom roll drive via gear and cardan shaft Hydraulic adjustment for bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - The maximum sheet thickness is 50% of the nominal capacity - The cone length must be a maximum of 30% or more than 60% of the roll length - Hardened rolls are recommended

Durum: yeni, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity – mild steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE ROLLING: The maximum plate thickness is 50% of the nominal capacity Hedjyb Sy Rjpfx Apyonn The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Durum: yeni, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2050 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness (without pre-bending) with D = 5x upper roll: 11 mm Max. sheet thickness (without pre-bending) with D = 1.5x upper roll: 9 mm Max. sheet thickness (with pre-bending) with D = 5x upper roll: 9 mm Max. sheet thickness (with pre-bending) with D = 1.5x upper roll: 7 mm Upper roll diameter: 220 mm Lower roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 4080 kg 4 rolls Upper roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position indicators for lower and side rolls Hardened rolls Cone bending device Hydraulic relief of upper roll Hydraulic drop-end bearing 2 working speeds Hnjdpfxeyb Szus Apyon Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or greater than 60% of the roll length Hardened rolls are recommended

Durum: yeni, Durum yeni Teslim süresi siparişi takiben yaklaşık 12 hafta Menşei ülke Türkiye Fiyat 25.200 € Hnsdpfx Apjyb Syqeyen Leasing oranı 481,32 € Bükme uzunluğu 1050 mm Maks. bükme kapasitesi – yapı çeliği 2,5 mm Maks. sac kalınlığı (ön bükmesiz) – yapı çeliği 2,5 mm Maks. sac kalınlığı (ön bükmeli) – yapı çeliği 2 mm Üst merdane çapı 90 mm Yuvarlama hızı 4,5 m/dk Motor gücü 2,2 kW Uzunluk 2250 mm Genişlik 1000 mm Yükseklik 1500 mm Ağırlık 900 kg SERİ ÜRETİMDE DAİRESEL VE ELİPTİK PARÇALAR İÇİN (SADECE 20 SANİYEYE KADAR ÇEVRİM SÜRESİ MÜMKÜN) 4 merdaneli Dokunmatik ekranlı NC kontrol Üst merdane hidro motor ve planet dişli ile tahrikli Hidrolik açılır yatak Mobil kumanda paneli Sertleştirilmiş merdaneler Kullanım kılavuzu ALMANCA OPSİYON: Besleme masası fiyat sorunuz

Durum: yeni, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity (mild steel): 10 mm Max. plate thickness without pre-bending at D=5x top roll: 10 mm Max. plate thickness without pre-bending at D=1.5x top roll: 8 mm Max. plate thickness with pre-bending at D=5x top roll: 8 mm Max. plate thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6,170 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital position display for bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Hnsdpfjyb Sykjx Apyjn IMPORTANT POINTS FOR CONE BENDING: Max. plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Durum: işlem için hazır (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, istif yüksekliği: 200 mm, kağıt gramajı (min.): 36 g/m², maksimum kağıt ağırlığı: 160 g/m², ürün genişliği (maks.): 520 mm, rulo çapı: 1.370 mm, TECHNICAL DETAILS Unwinder: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Maximum roll diameter: 1,370 mm Maximum roll weight: 800 kg Reel Slitter: Maximum production speed: 250 m/min Maximum web width: 520 mm Hedjyzpw Uopfx Apyenn Minimum web width: 150 mm Paper thickness: 36 g/m² to 160 g/m² Cutting accuracy: +/- 0.2 mm Infinitely variable format adjustment: 4" - 25" Infinitely variable slitting width adjustment: 5 mm to 80 mm Stack counter/Stacker: Minimum stack length: 100 mm Maximum stack length: 635 mm Minimum stack width: 115 mm Maximum stack width: 720 mm Minimum stack height: 100 sheets Maximum stack height: 200 mm Maximum production speed: 250 m/min (depending on paper thickness) Paper thickness: 36 g/m² to 160 g/m² MACHINE DETAILS Unwinder: Power supply: 32 A; 400 V, N, PE Compressed air: min. 6 bar (dry) Reel Slitter: Power supply: 32 A; 400 V, N, PE Compressed air: min. 6 bar (dry) Stack counter/Stacker: Power supply: 35 A; 400 V, N, PE Compressed air: min. 6 bar (dry) Folding station: Power supply: 50 A; 400 V, N, PE EQUIPMENT Electrical documentation Fully variable cutting and waste formats Format and length changes via control panel Longitudinal cuts with knife holder possible Waste extraction possible (extraction unit not included) Stacks up to two sheets simultaneously

Durum: yeni, Condition: New Hnsdpfx Ajynm Hfepysn Delivery time: approx. 12 - 14 weeks after order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Max. bending capacity – mild steel: 16 mm Max. sheet thickness without prebending at D=5x top roller: 16 mm Max. sheet thickness without prebending at D=3x top roller: 13 mm Max. sheet thickness without prebending at D=1.5x top roller: 16 mm Max. sheet thickness with prebending at D=5x top roller: 14 mm Max. sheet thickness with prebending at D=1.5x top roller: 12 mm Top roller diameter: 300 mm Bottom roller diameter: 300 mm Side roller diameter: 240 mm Max. opening: 50 mm Working height: 1,140 mm Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rollers PLC Fully hydraulic drive of top and bottom rollers (from 30 mm bending capacity on all four rollers) via planetary gearbox Hydraulic adjustment of the side rollers with electronic synchronization Hydraulic adjustment of the bottom roller with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rollers Conical bending device Hydraulic drop-end Mobile control console Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum sheet thickness is 50% of the nominal capacity The cone length may not exceed 30% or must exceed 60% of the roller length Hardened rollers are recommended

Durum: yeni, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness (no pre-bending) at D=5x upper roll: 25 mm Max. sheet thickness (no pre-bending) at D=1.5x upper roll: 20 mm Max. sheet thickness (with pre-bending) at D=5x upper roll: 20 mm Max. sheet thickness (with pre-bending) at D=1.5x upper roll: 16 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hodeynm Euopfx Apyonn Hydraulic adjustment for lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release for upper roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: Maximum sheet thickness is 50% of nominal capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Durum: yeni, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Leasing rate: €1,840.86 Bending length: 2,050 mm Max. bending capacity (mild steel): 30 mm Max. plate thickness without prebending at D=5x top roller: 30 mm Max. plate thickness without prebending at D=1.5x top roller: 25 mm Max. plate thickness with prebending at D=5x top roller: 25 mm Hodpfjynm Enox Apyenn Max. plate thickness with prebending at D=1.5x top roller: 20 mm Top roller diameter: 350 mm Bottom roller diameter: 350 mm Side roller diameter: 260 mm Rolling speed: 1.5-5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg - 4 rollers - Fully hydraulic drive for top and bottom rollers - Hydraulic adjustment for bottom and side rollers - Digital display for bottom and side roller positions - Hardened rollers - Cone bending device - Hydraulic top roller release - Hydraulic drop end - 2 working speeds - Centralized lubrication system - Overload protection - Mobile control panel - Equipment compliant with CE regulations OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL BENDING: - Max. plate thickness is 50% of the nominal capacity - Cone length must be max. 30% or more than 60% of the roller length - Hardened rollers are recommended

Durum: yeni, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Max. plate thickness without prebending at D = 5x top roll: 16 mm Max. plate thickness without prebending at D = 1.5x top roll: 13 mm Max. plate thickness with prebending at D = 5x top roll: 13 mm Max. plate thickness with prebending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Height: 1,550 mm Hsdpoynm Ehjfx Apyenn Weight: 6,100 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower rolls driven by gear wheels and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic lifting of upper roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Durum: yeni, Condition: new Delivery time: approximately 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Maximum bending capacity – mild steel: 20 mm Maximum plate thickness without prebending at D=5x top roll: 20 mm Maximum plate thickness without prebending at D=1.5x top roll: 16 mm Maximum plate thickness with prebending at D=5x top roll: 16 mm Maximum plate thickness with prebending at D=1.5x top roll: 12 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg Hjdeynm Ebspfx Apysnn 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Device for conical bending Hydraulic top roll release Hydraulic drop end 2 working speeds Centralised lubrication Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum plate thickness is 50% of nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Durum: yeni, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. plate thickness without pre-bending at D = 5x top roller: 10 mm Max. plate thickness without pre-bending at D = 1.5x top roller: 8 mm Max. plate thickness with pre-bending at D = 5x top roller: 8 mm Max. plate thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Lower roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller drive by hydromotor and planetary gearbox, lower roller drive by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic top roller release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE standard OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: The maximum plate thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roller length Hjdpeynm D Rofx Apyjnn Hardened rollers are recommended

Durum: yeni, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1550 mm Max. bending capacity - mild steel: 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3900 mm Width: 1150 mm Height: 1250 mm Weight: 3250 kg 4 rolls Top roll drive by hydromotor and planetary gearbox, lower roll drive by gear and cardan shaft Hydraulic adjustment of lower and side rolls Hnedpfoynmzpex Apysn Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic relief of top roll Hydraulic drop-end 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: Max. sheet thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Durum: yeni, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity - structural steel: 20 mm Max. plate thickness without pre-bending at D=5x top roll: 20 mm Max. plate thickness without pre-bending at D=1.5x top roll: 16 mm Max. plate thickness with pre-bending at D=5x top roll: 16 mm Max. plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Hodpeynmylofx Apyjnn Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end 2 working speeds Central lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended