Kullanılmış Schmid Energy Solutions Utsl-150T satın al (6.897)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Almanya
2.357 km
Şerit testere - yatay
BERG & SCHMIDGBS 250 Super HA -I Easy
Çağrı
Koşul: yeni, Cutting diameter: 255 mm
Saw band length: 2765 x 0.9 x 27 mm
Cutting width: 300 x 180 mm
Speed: 35 + 70 rpm
Total power requirement: 1.8 kW
Machine weight: approx. 450 kg
Space requirements: approx. 1.7 x 1.23 x 1.75 m
SPECIAL OFFER PRICE!!!
Double mitre metal band saw, Frequency inverter, Hydraulic semi-automatic GBS 250
Super HA-I Easy
• Mitre cutting left 60° and right 45°
• Material height sensor (automatic cut start detection)
• Frame and gearbox cast in one piece: very quiet operation with minimal vibration
• Hydraulically actuated vice, laterally adjustable
• Guided, high-quality industrial bearings
• Solid vice and machine casting
• Large machine bed
• Machine base with tool compartment and chip drawer
• Cut monitoring via ammeter
• Cutting pressure/feed regulator
• Support roller (infeed side)
• Ball-bearing turntable
Iiodofn Andopfx Acdeb
Semi-automatic operation:
1. Clamp material
2. Start saw
3. Fast downfeed to material start or, for series cuts, commence cutting immediately
4. Stop saw band
5. Raise frame to just above the material
6. Open vice
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDK-tech 800 H
Çağrı
Koşul: yeni, Cutting capacity at 90 degrees: round 680 mm
Cutting capacity at 90 degrees: square 640 mm
Cutting capacity at 90 degrees: rectangle 820 x 610 mm
Saw blade length 5850 x 41 x 1.3 mm
Blade speed 15 – 100 m/min
Table height 800 mm
Total power requirement 5.5 kW
Isdpfsfgyifex Acdeib
Machine weight approx. 4.45 t
Space requirements approx. 5.85 x 3.6 x 2.7 m
2-column bandsaw for fast cutting, K-tech 800H
with pusher system P 15. P 30 (option),
Fast, smooth, and ergonomic cutting
Specially developed for cutting profiles and beams as well as solid material. Material clamping takes place vertically on both the infeed and outfeed sides. From the K-tech 800 H model onward, the machine is equipped as standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled.
The machines come standard with the environmentally friendly “B&S Clean Cut cutting system” with minimum quantity lubrication, reducing cleaning effort and conserving resources.
CNC control
A CNC controller allows for the programming of up to 90 cutting programs with different cut lengths, quantities, and miters.
The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” that are hydraulically operated. This ensures safe gripping and handling of materials and bundles that may deviate slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, a ground rack, and a frequency-driven, robust gear motor.
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDK-tech 1200 H
Çağrı
Koşul: yeni, Cutting capacity at 90°: round 680 mm
Cutting capacity at 90°: square 640 mm
Cutting capacity at 90°: rectangle 1250 x 600 mm
Saw band length: 8140 x 54 x 1.6 mm
Band speed: 15 - 90 m/min
Table height: 855 mm
Total power requirement: 7.5 kW
Machine weight: approx. 4.96 t
Space requirement: approx. 5.7 x 4.0 x 2.75 m
2-column bandsaw for fast cutting, K-tech 1200H
with pusher system P 30. P 60 (optional),
Fast, smooth, and ergonomic cutting
Specially developed for cutting profiles and beams as well as solid material. Material clamping is vertical on both infeed and outfeed sides. From the K-tech 800 H onwards, the machine is equipped as standard with an additional horizontal vice. The interaction of the hydraulic saw frame lowering, material positioning, and pusher system is CNC-controlled.
The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" featuring minimum quantity lubrication. This reduces cleaning requirements and conserves resources.
CNC control
A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles.
The B&S pusher-, feed- and positioning system is equipped with "double-sided opening grippers" which are hydraulically driven. This ensures secure gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is a standalone unit guided by ball-bearing linear rails, a ground rack-and-pinion system, and a robust, frequency-controlled gear motor.
Iedpfefgyigjx Acdjib

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Almanya
2.357 km
Otomatik şerit testere - yatay
BERG & SCHMIDGBS 255 VA-I CNC
Çağrı
Koşul: yeni, Cutting capacity at 90 degrees, round: 255 mm
Cutting capacity at 90 degrees, square: 240 mm
Cutting capacity at 90 degrees, rectangle: 300 x 180 mm
Saw band length: 2,765 x 27 x 0.9 mm
Table height: 870 mm
Band speed: 18 - 110 m/min
Control: CNC
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 0.63 t
Space requirements: approx. 1.8 x 1.85 x 1.85 m
Mitre band saw, fully automatic, GBS 255 Super VA-I CNC
• Left mitre 45° automatic operation
• Left mitre 60° semi-automatic operation (cuts without programming)
• Material height sensor (automatic cut start detection)
• One-piece cast frame and gearbox, ensuring very quiet and low-vibration cutting
• Removable chip tray (for cleaning/desinfection)
• Impact-resistant and ergonomic control panel with oil-resistant EPDM cover
• High-performance positioning via incremental encoder (CNC)
• Top accessibility to saw, material, and feed unit
Isdpfx Ajd Iipzjcdsib
• Foldable safety cover
• Fine feed adjustment
• Semi-automatic cut
• CNC control to optimize working processes:
Input options for various parameters such as batch quantities and material lengths, automatic kerf calculation
• CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one sawing program with multiple cut lengths
• Automatic feeding unit (CNC) via ball screw spindle with incremental advance and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, minimum leftover length 170 mm.
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDK-tech DG 802
Çağrı
Koşul: yeni, Cutting capacity at 90°: round 680 mm
Cutting capacity at 90°: square 640 mm
Cutting capacity at 90°: rectangular 820 x 610 mm
Cutting capacity at 45°: round 550 mm
Cutting capacity at 45°: square 550 mm
Cutting capacity at 45°: flat 550 x 600 mm
Cutting capacity at 60°: round 370 mm
Cutting capacity at 60°: square 370 mm
Cutting capacity at 60°: flat 370 x 600/450 mm
Saw blade length: 7260 x 41 x 1.3 mm
Blade speed: 15 - 100 m/min
Table height: 800 mm
Total power requirement: 5.5 kW
Machine weight: approx. 4.8 t
Space requirement: approx. 5.85 x 3.7 x 2.7 m
2-column twin mitre band saw for fast cutting
with pusher system P15. Option: P30
Hydraulic saw frame lowering
• NC controlled
• Automatic angle positioning from +60° to –60°
High-quality automatic mitre adjustment
Iiedjfg E Hmjpfx Acdjb
Specially developed for cutting profiles and beams.
Maximum positioning accuracy is achieved through the new “B&S positioning system”. An intelligent NC control ensures smooth coordination between linear encoder and self-braking positioning motor, in combination with a reliable hydraulic brake and large-radius central positioning.
The work table is mounted using high-quality preloaded bearings, ensuring exceptionally smooth rotation.
CNC control
A CNC system allows programming of up to 90 cutting programs with different cut lengths, batch quantities, and mitre angles.
Dual-sided clamping positioning system
The B&S pusher system, feed and positioning unit, is equipped with “dual-sided hydraulic clamping grippers”. This ensures secure handling and transportation of materials and bundles, even if they deviate slightly from the ideal form. The pusher system is a separate construction, guided by ball-bearing linear rails, precision ground rack, and a frequency-driven, heavy-duty geared motor.
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDK-tech DG 1.202
Çağrı
Koşul: yeni, Cutting range at 90°: round 680 mm
Cutting range at 90°: square 640 mm
Cutting range at 90°: rectangular 1250 x 600 mm
Cutting range at 45°: round 680 mm
Cutting range at 45°: square 600 mm
Cutting range at 45°: flat 870 x 600 mm
Cutting range at 60°: round 580/550 mm
Cutting range at 60°: square 530/450 mm
Cutting range at 60°: flat 550 x 450 mm
Saw blade length 8140 x 54 x 1.6 mm
Blade speed 15 - 90 m/min
Table height 855 mm
Total connected load 7.5 kW
Machine weight approx. 5.3 t
Space requirement approx. 5.75 x 4.2 x 2.75 m
2-column dual-miter band saw for fast cutting
with pusher system P15 (optionally P30)
Iisdpfx Acsfg E Hnodjb
Hydraulic saw frame lowering
• NC controlled
• Automatic angle positioning from +60° to –60°
High-quality automatic miter adjustment
Specially developed for cutting profiles and beams.
Highest positioning accuracy is achieved by the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, coupled with a reliable hydraulic brake via large-radial center positioning.
The work table is supported by high-quality preloaded bearings to ensure exceptionally smooth rotation.
CNC control
A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and angles.
Dual-sided gripping positioning system
The B&S pusher system, feeding and positioning system, is equipped with “dual-sided opening gripping tongs” that are hydraulically operated. This ensures secure gripping and transport of materials and bundles, even those slightly deviating from the ideal shape. The pusher system is mounted separately and guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust geared motor.
Küçük ilan
Almanya
2.357 km
şerit testere mobil
BERG & SCHMIDPBS 90 ESC
Çağrı
Koşul: yeni, 90 derecede kesim alanı: yuvarlak 105 mm
90 derecede kesim alanı: kare 100 mm
90 derecede kesim alanı: dikdörtgen 100 x 105 mm
Şerit testere ölçüleri: 1335 x 13 x 0,65 mm
Boyutlar U x G x Y: 650 x 310 x 300 mm
Bant hızı: 30 - 80 m/dak
Toplam güç ihtiyacı: 0,95 kW
Makine ağırlığı yaklaşık 18 kg
Kampanya fiyatı!!
Berg & Schmid - Montaj şerit testeresi PBS 90 ESC
Güçlü ve özellikle sağlam metal şerit testere, alüminyum döküm testere masası ve sürekli ayarlanabilir kesme hızı ile
yataya kadar 60° açılı kesimler
Nakliye masraf payı: 25,-EUR
Iiodpfxsfv Aq Rj Acdob
Görseller aynı PBS 110 modeline aittir.
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDGBS 310/400 VA-I CNC
Çağrı
Koşul: yeni, Cutting range at 90 degrees: round 310 mm
Cutting range at 90 degrees: square 280 mm
Cutting range at 90 degrees: rectangular 400x250 mm
Saw blade length 4020x34x1.1 mm
Blade speed 18 - 100 m/min
Table height 890 mm
Total power requirement 2.2 kW
Machine weight approx. 0.99 t
Space requirement approx. 1.85 x 2.2 x 2.0 m
Mitre band saw, fully automatic, GBS 310/400 VA-I CNC
• Left mitre 45°, automatic operation
• Left mitre 60°, semi-automatic operation (cuts without programming)
Iijdpfx Aed Iiprjcdjb
• Material height probe (automatic cut start detection)
• Frame and gearbox made from a single casting, very quiet and low-vibration cutting
• Removable chip tray (for cleaning/disinfection)
• Shockproof and ergonomic control panel with oil-resistant EPDM cover
• Optimal access to saw, material and feed unit
• Foldable safety cover
• Fine adjustment of feed
• Semi-automatic cutting!
• CNC control to optimize workflows
Input options for various parameters such as quantities and material lengths,
automatic calculation of the kerf
• CNC control for 10 different sawing programs with 99 sub-programs for
various lengths and quantities, e.g. one sawing program with various
different cut lengths
• Automatic feed unit (CNC) via ball screw incremental feed
with automatic length compensation. Adjustable for cut lengths from
2 mm to 9,999 mm, remnant length 170 mm.
Küçük ilan
Almanya
2.357 km
Şerit testere - yatay
BERG & SCHMIDX-tech 900
Çağrı
Koşul: yeni, Cutting diameter round: 900 mm
Cutting diameter square: 900 mm
Cutting diameter flat: 900 x 900 mm
Saw blade length: 9300 x 67 x 1.1 mm
Table height: 790 mm
Band speed: 14 - 60 m/min
Total power requirement: 11 kW
Machine weight approx.: 8.45 t
Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m
The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels.
Iedpfefg E Hpex Acdoib
• The electro-welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise.
• The chip conveyor is hydraulically driven and features adjustable speed.
• All machine movements (saw frame, vice, feeder, blade guides) are supported by modern linear guides with high static and dynamic load capacities, guaranteeing very low sliding friction.
• Another distinctive feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping.
• Thanks to the height control of the blade position, the operator can set the blade close to the top edge of the material. After the cut, the blade is automatically raised back to its previous position. Alternatively, the blade can be set to remain in the lower position. During the cutting cycle, the software continuously compares blade load to preset values, and the sawing system can be stopped if irregularities are detected.
• The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven.
• The hydraulic unit, including filter and pressure gauge, ensures especially smooth operation at constant pressure.
• Precision-ground carbide inserts clamp the saw band, complete with lateral, hardened and adjustable guide rollers. The adjustable blade guide automatically moves as close as possible to the material.
• The saw band is tensioned by a hydraulic cylinder controlled via the machine software. Tension is automatically released after a preset period when the machine is idle or after a cycle is completed.
• Automatic version with CNC control available in X-TECH 900 / 1200 models, with a feed length of 500 mm for high-volume production series.
• The material is supported by a table with seven rollers, driven by a hydraulic orbital motor to enable precise positioning even under maximum load.
• All guided movements are supported by four recirculating ball guides with high static and dynamic load capacity; feed friction is greatly reduced. Hardened and ground prismatic guides.
Price on request.
Küçük ilan
Almanya
2.357 km
-Otomatik - yatay şerit testere
BERG & SCHMIDGBS 255 VA-I MPS
Çağrı
Koşul: yeni, Cutting capacity at 90 degrees: round 255 mm
Cutting capacity at 90 degrees: square 240 mm
Cutting capacity at 90 degrees: rectangular 300 x 180 mm
Saw blade length: 2,765 x 27 x 0.9 mm
Table height: 870 mm
Blade speed: 18 - 110 m/min
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 0.63 t
Space required: approx. 1.8 x 1.85 x 1.85 m
Mitre band saw, fully automatic GBS 250 Super VA-I MPS
• Mitre left 45° automatic operation
• Mitre left 60° semi-automatic operation (cuts without programming)
• Shock-proof and ergonomic control panel with oil-resistant EPDM cover
a.
• Material height sensor c. (automatic cut start detection)
• Frame and gearbox made from a single casting, very quiet and low-vibration cutting
• Removable chip tray (disinfectable)
• Easy top access to saw, material, and feed unit
• Foldable safety cover
• Fine adjustment for feed
• Semi-automatic cutting!
Iedpod Iip Asfx Acdeib
Automatic sawing with microprocessor control
Adjustable for 2 program levels
Semi-automatic operation
Fully automatic operation
Start after entering desired quantity and length: material positioning, cutting, and piece counting until program completion
• MPS control for input of required quantity of feed cycles
• All key machine data is displayed on the LED display during the cutting process (current consumption, cutting time, quantity)
• Input data is stored in RAM memory
• The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process
• Feed unit is mounted on a floating bearing
• Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm or, via reversing automatic, repeatable 1 – 29 times; remnant piece length 210 mm
Küçük ilan
Almanya
2.357 km
Otomatik şerit testere - yatay
BERG & SCHMIDGBS 305 VA-I CNC
Çağrı
Koşul: yeni, 90 derecede kesme alanı: yuvarlak 305 mm
90 derecede kesme alanı: kare 260 mm
90 derecede kesme alanı: dikdörtgen 350 x 200
Testere bıçağı uzunluğu 3375 x 27 x 0,9 mm
Bıçak hızı 18 - 100 m/dak
Masa yüksekliği 880 mm
Toplam güç gereksinimi 1,5/1,8 kW
Makine ağırlığı yaklaşık 0,84 t
Alan gereksinimi yaklaşık 1,85 x 1,9 x 2,0 m
Tam otomatik gönye şerit testere
• Sol gönye 45°, otomatik çalışma
• Sol gönye 60° yarı otomatik çalışma (programlamadan kesimler)
• Malzeme yükseklik sensörü (otomatik kesim başlangıcı algılama)
• Tek parçadan yapılmış çerçeve ve dişli, çok sessiz kesim ve çok düşük titreşim
• Çıkarılabilir talaş tepsisi (dezenfeksiyon)
• Yağa dayanıklı EPDM kapaklı darbeye dayanıklı ve ergonomik kontrol paneli
• Testere, malzeme ve besleme ünitesine üstten erişim
• Katlanır emniyet kapağı
• Hassas besleme ayarı
• Yarı otomatik kesim!
• CNC kontrolü ile iş akışlarını optimize edin
Parça numaraları ve malzeme uzunlukları gibi çeşitli parametreleri girme seçeneği,
Iiedeupw R Ajpfx Acdeb
kesim kanalının otomatik hesaplanması
• Farklı uzunluklar ve parça numaraları için 99 alt programlı 10 farklı testere programı için CNC kontrolü, örn. çeşitli
kesim uzunluklarına sahip 1 kesme programı
• Otomatik uzunluk telafisi olan bilyalı vidalı artımlı besleme yoluyla otomatik besleme ünitesi (CNC). 2 mm'den 9.999 mm'ye kadar kesme uzunlukları için ayarlanabilir, kalan uzunluk 170 mm. Şunları içerir:
- Mikro püskürtme cihazı
- Dengeleme elemanları
Küçük ilan
Almanya
2.357 km
Şerit testere - yatay
BERG & SCHMIDGBS 310/400 HA-I Easy
Çağrı
Koşul: yeni, Cutting capacity at 90°: round 310 mm
Cutting capacity at 90°: square 280 mm
Cutting capacity at 90°: rectangular 400 x 250 mm
Saw blade dimensions: 4020 x 34 x 1.1 mm
Blade speed: 37 + 74 m/min
Table height: 940 mm
Total power requirement: 1.8/2.2 kW
Machine weight: approx. 0.68 t
Space requirement: approx. 1.5 x 1.78 x 1.3 m
SPECIAL OFFER PRICE!!!
Double-mitre band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy
• Mitre cut left 60° + right 45°
• Industrial-grade hydraulics, high-performance 18 bar
• Excellent material accessibility
• Ammeter for monitoring
- Cutting force optimization
- Increased blade service life
- Optimized cutting accuracy
• Hydraulic vice opens/closes automatically
• Swarf removal brush
• Ball-bearing material turntable
• Movable quick-release vice
• Material height sensor (automatic cut start detection)
Iiedpfjd Iiptox Acdeb
Semi-automatic operation:
1. Clamp material
2. Start saw
3. Rapid lowering until contact with material, or directly start cutting for batch cuts
4. Stop saw blade
5. Raise frame slightly above material
6. Open vice
Küçük ilan
Almanya
2.357 km
Şerit testere - yatay
BERG & SCHMIDGBS 242 DG HA-I
Çağrı
Koşul: yeni, Cutting capacity at 90°: round 250 mm
Cutting capacity at 90°: square 210 mm
Cutting capacity at 90°: rectangular 290 x 210 mm
Saw band length 2,965 x 27 x 0.9 mm
Table height 940 mm
Band speed 35 / 70 m/min
Total power requirement 1.1/1.3 kW
Machine weight approx. 0.35 t
Space required approx. 1.3 x 0.8 x 1.5 m
SPECIAL OFFER!!!
Double miter metal band saw, hydraulic, semi-automatic, equipped with:
- Hydraulic vice
- Material height sensor
- Cut monitoring via ammeter
- Adjustable feed pressure regulator
- Band speed 34 / 74 m/min
- Miter cuts up to 60° left and 45° right
Iijdpfxsd Iip Ro Acdeb
- Patented, ball bearing rotary table for easy miter adjustment
- Quick-release vice, movable
- Quick clamping lever
- Automatic coolant system
Freight charge share €120,-
Küçük ilan
Almanya
2.465 km
DN SOLUTIONS 3100 LY
DN SOLUTIONS3100 LY
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2023, mil motoru gücü: 22.000 W, maksimum mil hızı: 3.000 dev/dak, X ekseni hareket mesafesi: 293 mm, Y ekseni hareket mesafesi: 130 mm, Z ekseni hareket mesafesi: 1.350 mm, toplam yükseklik: 2.315 mm, toplam genişlik: 2.067 mm, toplam ağırlık: 8.000 kg, kontrolör üreticisi: FANUC, kontrolör modeli: 0i-F, ürün uzunluğu (maks.): 4.530 mm, eksen sayısı: 4, Bu 4 eksenli DN SOLUTIONS 3100 LY torna freze merkezi 2023 yılında üretilmiştir. Maksimum 420 mm tornalama çapına ve 1285 mm tornalama uzunluğuna sahiptir. Makine, 12 inçlik bir ana iş mili aynası ve hem X hem de Y eksenlerinde 30 m/dak'lık hızlı bir travers hızı ile donatılmıştır. Yüksek kaliteli tornalama yetenekleri elde etmek istiyorsanız, satılık DN SOLUTIONS 3100 LY makinemizi göz önünde bulundurun. Daha fazla ayrıntı için bizimle iletişime geçin.
• Ana iş mili ayna boyutu: 12 inç (306 mm)
• Çubuk kapasitesi: 102 mm
• Hızlı travers: X 30 m/dak; Y 30 m/dak; Z 10 m/dak
• Maksimum dönüş çapı: 420 mm
• Maksimum dönüş uzunluğu: 1285 mm
• Tahrikli takım hızı: 5000 rpm
• Aletler: 12 istasyon, BMT65
• Kızak tipi: Kutu kılavuzlar
• Eksenler/özellikler: C ekseni, Y ekseni
• Elektrik: 380 V, 3 fazlı, 50/60 Hz
• Elektriksel değerler: 55,02 kVA; Tam yük akımı 83,60 A; Kısa devre kapasitesi 10 kA; Kesme kapasitesi 5 kA
Ek ekipman
• İsteğe bağlı:
• 1 adet. Dış tornalama takım direği BMT65 25x25 tekli sol, sağ (500-0679)
• 3 adet. Dış tornalama takım direği R/L yüksek (500-6960)
• 1 adet. BMT65P/SQ 25 mm yüzey işleme takım direği (500-0834)
• 3 adet. Delme çubuğu tutucuları (ID: 50 mm) BMT65P (500-5555)
• 1 adet. IK kapağı (500-0837)
• 1 adet. Redüksiyon manşon seti
• 1 adet. Redüksiyon manşon seti (500-0808)
• 1 adet. Adaptör seti PRECI-FLEX Er32 (BMT 65P) (500-0500)
• 12 adet BMT 65'i (500-1931) kapsar
• 2 açılı harici soğutmalı Eppinger AGW
• 2 adet düz dıştan soğutmalı Eppinger AGW
• Talaş konveyörü (menteşe bantlı konveyör). İstek üzerine fiyat
• Makine standart temel paket ile teslim edilir: Taret tam donanımlı, taban tutucu dahilMakine hiç üretime girmemiş bir Showroom makinesidir. Yeni gibi
Technical Specification
Counter Spindle No
Iedpfsyu Rn Tox Acdjib
Driven Tools Yes
Küçük ilan
Almanya
2.465 km
DN SOLUTIONS PUMA 5100 MB
DN SOLUTIONSPUMA 5100 MB
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2023, mil motoru gücü: 45.000 W, maksimum mil hızı: 1.500 dev/dak, X ekseni hareket mesafesi: 362 mm, Y ekseni hareket mesafesi: 110 mm, Z ekseni hareket mesafesi: 1.105 mm, toplam yükseklik: 2.194 mm, toplam genişlik: 2.056 mm, Çubuk çapı (maks.): 166 mm, toplam ağırlık: 10.750 kg, kontrolör üreticisi: FANUC, kontrolör modeli: 0i-F Plus iHMI Touch, ürün uzunluğu (maks.): 4.759 mm, eksen sayısı: 4, Bu 4 eksenli DN SOLUTIONS PUMA 5100 MB, 2023 yılında üretilmiştir. Maksimum 650 mm tornalama çapına ve 952 mm tornalama uzunluğuna sahiptir. Makine, 21 inçlik bir ana iş mili aynası ile donatılmıştır ve 20 m/dak'ya kadar hızlı bir travers hızı sunar. Yüksek kaliteli tornalama kabiliyetleri elde etmek istiyorsanız, satışa sunduğumuz DN SOLUTIONS PUMA 5100 MB torna freze merkezini göz önünde bulundurun. Daha fazla bilgi için bizimle iletişime geçin.
• Ana iş mili aynası boyutu: 21 inç (535 mm)
• Çubuk kapasitesi: 166 mm
• Hızlı travers X: 16 m/dak
• Hızlı travers Z: 20 m/dak
• Maksimum hızlı travers: 20 m/dak
• Ana iş mili torku: 2957 Nm
• Maksimum dönüş çapı: 650 mm
• Maksimum dönüş uzunluğu: 952 mm
• Tahrikli takımların hızı: 4000 rpm
• Alet istasyonu sayısı: 12
• Alet arayüzü: BMT75
• Kızak tipi: Kutu kılavuz yolları
• İş mili deliği: 117-166 mm (konfigürasyona bağlı olarak)
• Soğutma sistemi: Taret üzerinden yüksek basınçlı soğutma sıvısı
• Punta: Programlanabilir punta
• Alet ölçümü: Otomatik hidrolik takım ölçümü
• Kesme kuvveti izleme: Evet
• İplik kesme: Değişken hızda sabit giriş noktası
Iiedeyuywkjpfx Acdjb
• Ek el çarkı: Evet
• Otomatik makine kapısı: Evet
• Elektrik bağlantısı: 380 V
• Elektrik beslemesi: 3 fazlı
• Frekans: 50 / 60 Hz
• Nominal güç: 61,56 kVA
• Tam yük akımı: 93,53 A
• Kısa devre kapasitesi: 10 kA
• Kesinti kapasitesi: 5 kA
Ek ekipman
• İsteğe bağlı:
• 4 adet. Harici sıkıştırma parçası (500-0838)
• 1 adet. Yükseltilmiş dış takım tutucu
• 1 adet. Yüzey tornalama takım tutucu R/L
• 6 adet. İç tornalama takım tutucuları
• 1 adet. İç uç kapağı (500-0839)
• 1 adet. Delme redüksiyon manşon seti
• 1 adet. U-Drill redüksiyon manşon seti
• 2 açılı dıştan soğutmalı harici takım tutucu Eppinger
• 2 düz dıştan soğutmalı harici takım tutucu Eppinger
• Opsiyonel: Talaş konveyörü (menteşe bantlı konveyör). Talep üzerine fiyat.
• Makine standart bir temel paket ile teslim edilir: Taret tam donanımlı, taban tutucu dahil
Technical Specification
Counter Spindle Yes
Driven Tools Yes
Küçük ilan
Fröndenberg/Ruhr
2.547 km
Huni freze, Huni freze makinesi
Berg & SchmidD1612-2K
Çağrı
Koşul: mükemmel (kullanılmış), Hopper milling machine for orthopedic technology and prosthetics manufacturing. Suitable for precise and efficient production (grinding, milling) of prostheses or other orthopedic work. Spindle speed: 2800 rpm. Motor power: 1.5 kW. Adjustable extraction hopper, new extraction hose included. Good technical condition; the machine is partially refurbished and newly painted.
Iijdpfxsy Daqwo Acdsb
Küçük ilan
Kaufungen
2.416 km
Otomatik şerit testere
Berg&SchmidX tech 410
Çağrı
Koşul: ikinci el, 1 used automatic bandsaw
Make: Berg & Schmid
Model: X Tech 410
Technical data:
Cutting capacity: round 410 mm or flat 410 x 410 mm
- Modern 2-axis CNC control
- Blade tracking monitoring with automatic feed adjustment
Isdpoytvqqsfx Acdoib
- Automatic first-cut function, minimum remnant length 15 mm
- Infinitely variable, frequency-controlled saw drive
- Clamping pressure regulation for thin-walled tubes and profiles
- Hydraulically driven chip conveyor
- Automatic double-sided saw blade lift-off device
- Hydraulic saw blade tensioning
- Material feed by precision ball screw and linear guide
Drive power: 5.5 kW
Working height: 730 mm
Paint finish: platinum grey RAL 7036 and turquoise RAL 5018
Küçük ilan
Almanya
2.357 km
Dairesel Metal Testeresi
BERG & SCHMIDVKS 370 VA
Çağrı
Üretim yılı: 2019, Koşul: işlem için hazır (kullanılmış), Ek Donanım
Starter Kit 1, 2 adet dairesel testere bıçağı ve 10 litre soğutma sıvısı konsantresinden oluşur.
Dengeleme elemanı (1 set = 4 adet), M 12x100 saplama cıvatalı.
Besleme tarafı – sol.
Besleme makaralı konveyör URB 290, uzunluk 3000 mm.
URB 290/400 için besleme adaptörü.
Çıkış makaralı konveyör URB 290, uzunluk 2000 mm.
URB 290/400 için çıkarma adaptörü.
Makine için bağlantı parçası, sağ tarafa montajlı.
LM 55 M/man. uzunluk durdurucu, ölçüm uzunluğu 2000 mm.
BERG & SCHMID VKS 370 VA 2019 yılında üretilmiştir. CNC frekans dönüştürücülü, tam otomatik hidropnömatik dikey dairesel testere özelliği bulunur. Makinede malzeme akışını optimize eden, besleme tarafında (3 m) ve çıkış tarafında (2 m) makaralı konveyörler mevcuttur. Ayrıca Starter Kit 1, dairesel testere bıçakları ve soğutma sıvısı konsantresi ile birlikte gelir. Bu BERG & SCHMID VKS 370 VA Dairesel Metal Testereyi satın alma fırsatını değerlendirin. Daha fazla bilgi için bizimle iletişime geçin.
Uygulama Tipleri
Iodpfx Ajx Nr Sqocdsib
Kesme
Küçük ilan
Beograd
1.395 km
Endüstriyel LayFlat Kitap Blok Ciltleme
ISAG Imaging Solutions AG SwitzerlandfastBlock 04/90/2300
Çağrı
Koşul: yeni gibi (kullanılmış), Üretim yılı: 2018, Imaging Solutions'ın 4. Nesil XXL sistemi 5'i 1 arada çözüm.
Tek bir çalışma adımında sayfalardan üretim yapan bir LayFlat kitap bloğu. Tek bir düğmeye basıldığında gerekli tüm bireysel adımlar tetiklenir: kesme, katlama, katlama, presleme ve yapıştırma. LayFlat kitap blokları minimum işgücü gereksinimleriyle üretilir ve aynı gün bitirme ve gönderim mümkündür.
Özellikler:
Saatte 2300 sayfa
370 mm x 457 mm'ye (14,5” x 18”) kadar XL formatlı kitap blokları
Yüksek seviyeli performans: saatte 250'ye kadar kitap bloğu
Barkod kontrollü ürün seçimi:
Bir rulo içinde farklı sayfa uzunlukları ve kitap yapılandırması (ekler) mümkündür, böylece toplu iş için gereken süre azaltılır
220 mm (8,66”) istifleme yüksekliğine sahip isteğe bağlı ek besleyici
İki sayfa arasına sınırsız sayıda ek yapıştırılabilir
Hassas ve homojen tutkal uygulaması için yapıştırma kafasının aktif ayarlanması
Mükemmel kitap sırtları için isteğe bağlı hat içi kitap presi
Dokunmatik ekranlı 5'i 1 arada tam otomatik baskı sonlandırma sistemiyle kullanımı kolay
Tek bir çalışma adımında kesme, katlama, katlama, presleme ve yapıştırma
Iedpfx Acen Ut D Nsdsib
Sayfalardan üretilen Tam LayFlat kitap blokları Barkod kontrollü iş akışlarına entegre edilebilir (örn. 3 bıçaklı kesici) Düşük üretim maliyetleriyle tutarlı birinci sınıf kalite sağlar Panoramik sayfalar için birinci sınıf LayFlat fotoğraf kitabı teknolojisi Orijinal fotoğraf kağıdını ve dijital baskı kağıdını işler.
Küçük ilan
Beograd
1.395 km
Yarı Otomatik Kanvas Germe
ISAG Imaging Solutions AGEasyFrame
Çağrı
Üretim yılı: 2012, Koşul: mükemmel (kullanılmış), easyFrame, Imaging Solutions AG tarafından tuval çerçeveleme için yarı otomatik bir çözümdür. Saatte 50 çerçeveye kadar işlem yapabilir (operatöre bağlı olarak). Makine mükemmel durumdadır. 8x6'dan 43x43 inç tuvallere kadar sedye üretmek için çerçeve bağlantılarına sahiptir.
Iijdpfx Acjn Ut Hcsdsb
Küçük ilan
Lanaken
2.658 km
Tehlikeli madde dolabı
Protecta SolutionsBMC 19.11
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 2020, Fonksiyonellik: tamamen fonksiyonel, toplam genişlik: 120 mm, toplam uzunluk: 220 mm, toplam yükseklik: 245 mm, kullanılabilir tank kapasitesi: 3.300 l, Valrem standartlarına uygun çelik kasa. Yangına dayanıklı > 120 dakika
Dış boyutlar:
Uzunluk: 220 cm
Genişlik: 120 cm
Yükseklik: 245 cm
İç boyutlar:
Uzunluk: 170 cm
Iiodpfeykapfjx Acdjb
Genişlik: 95 cm
Yükseklik: 210 cm
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Wijk bij Duurstede
2.719 km
Parçalayıcı
RSS Recycling Shredders & Solutions600 serie MR
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, RSS 600 Serisi Mono Rotorlu Parçalayıcı (yeni seri)
18,5 kW
Eleğin ölçüsü görüşülerek belirlenir
Çeşitli plastik/ahşap/veya diğer malzemeler için uygundur
Motorlar, elek, şasi gibi parçalarda özelleştirme mümkündür.
Besleme ve çıkış bantları, depolama, metal ayırma mümkündür.
Daha büyük veya daha küçük modeller de mevcuttur.
Iedpeirt H Aofx Acdeib
Çıkış bandı veya helezon opsiyoneldir.
Sorularınız varsa bizi arayın veya e-posta gönderin, size yardımcı olmaktan memnuniyet duyarız. ÖNEMLİ! Lütfen adınızı, firma adınızı ve telefon numaranızı belirtiniz.
Küçük ilan
Wijk bij Duurstede
2.719 km
Plasti̇k i̇şleme maki̇nesi̇
RSS Recycling Shredders & Solutions1000 Series maalmolen
Çağrı
Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, We deliver the machines wherever you require, and can install them upon request in consultation.
Optional: Stainless steel discharge element, stainless steel storage silo, blower, pipes approx. 3 meters.
Grinding mill 1000 series 45 kW,
3 x 10 knife set or your preferred 5 x 2 rotor configuration (pictured: heavy duty rotor set and standard 3x2 set)
2 x stators
screen deck upon request
Iedpog Ainqofx Acdjib
Product discharge and storage available in various configurations, attractively priced in combination.
Motor power can be customized.
Other modifications negotiable, such as a rotor adaptation for more knives, e.g. 5 rows of knives or a heavy duty version.
Delivery by arrangement.
Call or email us to discuss your requirements or if you have any questions. Please respond with your name, company name, and correct phone number.
Without the correct information, RSS Recycling Shredders and Solutions cannot respond.
Küçük ilan
Wijk bij Duurstede
2.719 km
Dört akslı kıyıcı
Recycling Shredders & Solutions RSS4 shaft shredder
Çağrı
Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, RSS HD 4 şaftlı parçalayıcı
800/1000/1200 serisi
2X 22 kW, (2x18,5 veya 2x30 mümkün) veya isteğiniz.
Hidrolik elek paketi ile elek değiştirme/temizleme sadece 10 dakika sürer.
40 mm bıçaklar. veya diğer boyutlar mümkün
40, 50 mm elek tablası.
Örneğin; bıçaklar, motorlar, elek, çerçeve mümkündür.
Iisdpfxjh N Dmne Acdjb
Besleme ve boşaltma konveyörleri, depolama, metal ayırma mümkündür.
Daha büyük veya daha küçük modelleri de mevcuttur.
Elek için opsiyonel Hızlı Hidrolik temizleme veya değiştirme sistemi
Daha fazla bilgi veya tavsiye için bizimle iletişime geçin.
Teslimat koşulları RSS, Danışma ile teslim süresi.
Garanti ve NL CE sertifikası.
yerleştirme/montaj mümkündür.
Görüntülenmesi Mümkün.
Yorumlar: İsim, şirket adı ve telefon numarasıyla birlikte.
Küçük ilan
Wijk bij Duurstede
2.719 km
Mono rotorlu öğütücü/ parçalayıcı
RSS Recycling Shredders & SolutionsRSS 1000 series MR
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, çalışma saatleri: 4 h, güç: 45 kW (61,18 bg), Rotor uzunluğu 1000 mm, 45 + 2,2 kW gücünde,
Besleme haznesi boyutu 1400 x 1000 mm, elek boyutu isteğe bağlı olarak belirlenebilir.
Opsiyonel olarak konveyör bant mevcuttur.
Teslimat talep üzerine gerçekleştirilmektedir.
Daha fazla bilgi için: RSS Recycling Shredders & Solutions.
Iiodpskzg U Dsfx Acdjb
İletişim veya sorularınızda firma adı, ÖNEMLİ! adınız, firma ve telefon numaranızı belirtiniz.
Sizin için aramayı kolaylaştırıyoruz: "schmid energy solutions utsl-150t"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay



























































































































