İkinci El Berg & Schmid Pnömatik Basın Satın Al (9.677)

Durum: yeni, Saw blade diameter: 250 mm Cutting capacity at 90° (round): 85 mm Cutting capacity at 90° (square): 75 mm Cutting capacity at 90° (flat): 100 x 65 mm Cutting capacity at 45° (round): 80 mm Cutting capacity at 45° (square): 75 mm Cutting capacity at 60° (flat): 90 x 60 mm Total power requirement: 0.8 kW Machine weight approx. 0.04 t SPECIAL OFFER PRICE!!! Mounting saw with elaborate standard equipment and large cutting capacity - For mitre cuts to the left up to 45° - Suitable for cutting steel, stainless steel, and, to some extent, aluminium profiles - Automatic blade cooling system directly on the saw blade - 24 V safety switch in the handle with restart protection - Total weight 38 kg = easy to transport - Length stop, assembly tools Optional: Saw blade €57 Machine base type 20505 €192 Lsded Iipcopfx Adcoru

Durum: yeni, Cutting diameter: 240 mm Saw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Mitre cut left: 60° • Quick-release vice with quick-clamping device • Quick-clamping lever for easy handling • Frame and gearbox are cast as a single piece, ensuring extremely quiet and low-vibration operation • Electrical monitoring of blade tension and blade breakage, saw band cover Ledpfjd Iip Ssx Adcsru • Carbide saw blade guides • Large machine base • Machine stand (delivered disassembled) with automatic cooling system The AutoCut system consists of: Hydraulic cylinder, feed rate control, spring assembly, limit switch Automatic lowering of the saw frame via the hydraulic cylinder, continuously adjustable feed, with limit switch at end of cut. Rapid lowering of the saw frame from rest position to the workpiece, then switch to normal cutting feed (e.g. for scribing). Manual operation: The hydraulic cylinder acts as a braking cylinder (for tasks such as notch cutting). Via the braking cylinder, the saw can be positioned at any point during the return stroke.

Durum: yeni, 90 derece kesim alanı: yuvarlak 250 mm 90 derece kesim alanı: kare 210 mm 90 derece kesim alanı: dikdörtgen 290 x 210 mm Testere bandı uzunluğu: 2.965 x 27 x 0,9 mm Tabla yüksekliği: 940 mm Bant hızı: 35 + 70 m/dak Toplam güç ihtiyacı: 1,1 / 1,3 kW Makine ağırlığı yaklaşık 0,35 t Alan ihtiyacı yaklaşık 1,3 x 0,8 x 1,5 m DİKKAT KAMPANYA FİYATI!!! Çift açılı metal şerit testere ile: - Bant hızı 35 + 70 m/dak - Sol 60° ve sağ 45°'ye kadar açılı kesimler - Hızlı açılı ayar için bilyalı rulmanlı döner tabla Lrjdpfx Adjd Iip Necsu - Taşınabilir hızlı mengene - Hızlı sıkma kolu - Otomatik soğutma sistemi

Durum: ikinci el, Teknik detaylar: Çap: 300 mm Montaj: 40 Ağırlık: 5 kg Montaj ISO 40 Lrjdpfxsvb Amkj Adcsu *

Durum: yeni, Testere bıçağı çapı 315 mm 90 derece kesme alanı: yuvarlak 108 mm 90 derece kesme alanı: kare 93 mm 90 derece kesme alanı: dikdörtgen 150 x 90 mm Çalışma yüksekliği 920 mm Testere bıçağı devir hızları 17+33 veya 33+66 d/dak Toplam güç ihtiyacı 1,5/1,8 kW Makine ağırlığı yaklaşık 0,328 ton Alan ihtiyacı yaklaşık 0,8x0,9x1,7 m KAMPANYA FİYATI!!! Yüksek performanslı dikey dairesel testere VKS 315 (Ürün 20150) • Sol 60° + sağ 45° gönye • Çapak azaltılmış kesimler ve hızlı yan taşıma için çift kollu mengeneli bağlama sistemi (4 noktalı sabitlenme) • Optimal malzeme sabitlemesi için büyük döner tabla ve ekstra sağlam mengeneli testere tablası • Testere başında dayanıklı prizma kızak (Kırlangıç kuyruğu ayarlanabilir mekanizma) • Otomatik soğutma • Talaş çekmeceli makine şasisi • Yüksek sıkma gücü için metal kol Lredpfxed Iin Sj Adcju DİKKAT: Fiyat testere bıçağı hariçtir!!! (Testere bıçağı fiyatı 109,-EUR)

Durum: ikinci el, Saw blade diameter 530 mm Lrodpfx Adod Iinwocju Cutting capacity at 90 degrees: round 180 mm Cutting capacity at 90 degrees: square 170 mm Cutting capacity at 90 degrees: flat 380x70 mm Cutting capacity at 45 degrees: round 180 mm Cutting capacity at 45 degrees: square 150 mm Cutting capacity at 45 degrees: flat 290x70 mm Total power requirement 2.2 kW Machine weight approx. 350 kg Dimensions (L x W x H): 1.1 x 0.9 x 1.5 m Under-table aluminium circular saw, hydro-pneumatic semi-automatic - Maintenance unit for pneumatic control - Turntable with ball bearing - Extraction port for chip extraction system - 2 pneumatic vertical clamps - 180° swivel range - Adjustable rear material stop = enlarged cutting range - Infinitely variable saw blade feed - Two-hand safety control - Horizontal clamps (optional) - Micronizer system for coolant emulsion - Motor brake - Machine base frame - For profile cutting, our B & S Coolmatic Plus is required - Saw blade optional

Durum: ikinci el, Saw blade diameter: 350 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 110 mm Lredpfx Aed Iin Ajdcju Cutting range at 90°: flat 200 x 88 mm Cutting range at 45°: round 115 mm Cutting range at 45°: square 110 mm Cutting range at 45°: rectangle 150 x 80 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.27 t Dimensions (L x W x H): 1.1 x 0.95 x 1.7 m - Hydropneumatic semi-automatic - Mitre cut left/right 45° - Head tilt cuts up to 45° (shiftable) - Ball bearing table - Pneumatic double clamping device - Machine base with mist spray unit - Chip extraction nozzle on saw blade guard

Durum: ikinci el, Saw blade diameter: 400 mm Cutting capacity at 90 degrees (round): 110 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (flat): 200 x 60 mm Cutting capacity at 45 degrees (round): 100 mm Ljdpfjd Iinxex Adcsru Cutting capacity at 45 degrees (square): 100 mm Cutting capacity at 45 degrees (rectangular): 140 x 60 mm Total power requirement: 1.5 kW Machine weight: approx. 130 kg Dimensions (L x W x H): 0.8 x 0.7 x 1.3 m SPECIAL OFFER PRICE!! Under-table aluminium circular saw, semi-automatic with hydropneumatic feed. · Service unit for pneumatic control · Ball-bearing rotary table · Extraction port for chip extraction system · 2 pneumatic vertical clamps · Swivel range: 180° · Adjustable rear material stop = extendable cutting area · Infinitely variable saw blade feed · Two-hand safety control · Horizontal clamps (optional) · Mist spray unit for coolant emulsion · Motor brake · Machine base frame · For profile cuts, the use of our B & S Coolmatic Plus is mandatory · Saw blade (optional)

Durum: ikinci el, Saw blade diameter: 350 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (flat): 200 x 88 mm Cutting capacity at 45° (round): 115 mm Cutting capacity at 45° (square): 110 mm Cutting capacity at 45° (rectangle): 150 x 80 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 0.59 t Dimensions (L x W x H): 1.9 x 1.4 x 1.8 m Hydropneumatic fully automatic - Mitre cuts left/right Lrjdod Iinzspfx Adceu - Head tilt cuts up to 45° (swivel) - Hydro-pneumatic saw head control - Pneumatic double clamping device - Pneumatic vertical clamping device - Electro-pneumatic material feed with material hold-down - Vernier for fine length adjustment - Integrated coolant spray system - Chip extraction connection at saw blade guard - Minimum remaining piece length in automatic mode: 210 mm MPS control system: - Storage of cut start/end positions - Display of power consumption, piece count, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator

Durum: yeni, Outer dimensions (width x height): 80 x 80 mm Total length: 6050 mm Divided into: 2x25/30/35/40/45/50/3x100/11x500 mm Permissible load: 200 t/m Material: 42CrMo4, hardened (plasma deep nitrided: hardness approx. 700 HV, 58 - 63 HRC, 0.4 - 0.5 mm depth), Lrsdpoy N S Irefx Adcsu ground finish

Durum: yeni, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Ljdpsfg E Hpofx Adceru Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise. • The chip conveyor is hydraulically driven and features adjustable speed. • All machine movements (saw frame, vice, feeder, blade guides) are supported by modern linear guides with high static and dynamic load capacities, guaranteeing very low sliding friction. • Another distinctive feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping. • Thanks to the height control of the blade position, the operator can set the blade close to the top edge of the material. After the cut, the blade is automatically raised back to its previous position. Alternatively, the blade can be set to remain in the lower position. During the cutting cycle, the software continuously compares blade load to preset values, and the sawing system can be stopped if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. • The hydraulic unit, including filter and pressure gauge, ensures especially smooth operation at constant pressure. • Precision-ground carbide inserts clamp the saw band, complete with lateral, hardened and adjustable guide rollers. The adjustable blade guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder controlled via the machine software. Tension is automatically released after a preset period when the machine is idle or after a cycle is completed. • Automatic version with CNC control available in X-TECH 900 / 1200 models, with a feed length of 500 mm for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor to enable precise positioning even under maximum load. • All guided movements are supported by four recirculating ball guides with high static and dynamic load capacity; feed friction is greatly reduced. Hardened and ground prismatic guides. Price on request.

Durum: yeni, Baskı gücü 34,0 kN Stroke 40 mm Çıkıntı 130 mm Çalışma yüksekliği 80 - 240 mm arası Tabla ölçüsü 190 x 140 mm Mil çapı 30 mm Ljdsfv Avyspfx Adceru Makine ağırlığı yaklaşık 80 kg Boyutlar (U x G x Y) 375 x 200 mm Diz eklemli pnömatik presler Yan kol ile açılı dişli üzerinden hassas iş yüksekliği ayarı dahil konforlu ve sorunsuz ayarlanabilir. Diz eklemli pnömatik presler, maksimum baskı gücüne stroğun sonuna yakın ihtiyaç duyulduğunda, örneğin montaj, delme, işaretleme, perçinleme gibi uygulamalarda kullanılır.

Durum: yeni, Baskı 17,0 kN Strok 40 mm Boğaz mesafesi 110 mm Çalışma yüksekliği 70 - 220 mm arası Ledofv Avvopfx Adcjru Tabla ölçüsü 190 x 140 mm Mil çapı 30 mm Makine ağırlığı yaklaşık 60 kg Ölçüler (U x G x Y) 310 x 190 mm Dizli pnömatik presler Yan kolu ile açılı dişli üzerinden hassas çalışma yüksekliği ayarı dahil, konforlu ve sorunsuz ayarlanabilir. Dizli pnömatik presler, maksimum baskı gücüne strok sonuna yakın ihtiyaç duyulduğunda kullanılır; örneğin montaj, delme, kabartma, perçinleme vb. işlemlerde.

Durum: yeni, Baskı gücü 1,5 kN Strok 40 mm Çıkıntı 70 mm Çalışma yüksekliği 75 - 170 mm arası Tabla alanı 115 x 70 mm Lredpfx Asfv Av Dedceu Makine ağırlığı yaklaşık 11 kg Boyutlar (U x G x Y) 115 x 175 x 290 mm Dişli millerle el presi HZ 150 Kuvvet aktarımı dişli mili mekanizmasıyla sağlanır. Çalışma sırasında sürekli baskı gerektiğinde kullanılır. Hassas üretim, mil sertleştirilmiş ve taşlanmış, sınırsız ömür Uzun mil kılavuzu, optimum baskı performansı, DIN 650'ye göre ortada açılmış T-kanalı, kanal taşları tam uyumludur.

Durum: yeni, Baskı 17,0 kN Strok 60 mm Maksimum açıklık 105 mm Çalışma yüksekliği 75 - 180 mm Tabla ölçüsü 170 x 130 mm Lrjdpfx Adofv Avnjcsu Mil çapı 25 mm Makine ağırlığı yaklaşık 35 kg Boyutlar (U x G x Y) 260 x 130 x 415 mm Diz mafsallı el presleri – KAMPANYA FİYATI!!! HK 1700 strok 60 mm, krank kolu ve hassas çalışma yüksekliği ayarı ile Stant yüksekliği 450 mm Ekstra güç harcamadan üretimde daha fazla baskı. Diz mafsalı tekniği sayesinde strokun sonunda maksimum baskı gücü. Mil başı ve stantta özellikle sağlam konstrüksiyon.

Durum: yeni, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirements: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, Frequency inverter, Hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cutting left 60° and right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece: very quiet operation with minimal vibration • Hydraulically actuated vice, laterally adjustable • Guided, high-quality industrial bearings • Solid vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Cutting pressure/feed regulator • Support roller (infeed side) • Ball-bearing turntable Ledpfsfn Andsx Adceru Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast downfeed to material start or, for series cuts, commence cutting immediately 4. Stop saw band 5. Raise frame to just above the material 6. Open vice

Durum: yeni, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 480 mm Cutting capacity at 90°: rectangle 610 x 450 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight approx. 2.3 t Space requirements approx. 2.65 x 2.8 x 2.2 m Lredpfxjfu Nbbj Adcou For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation. Material height sensor (automatic cut start detection) Automatic feed unit with ball screw incremental feed and automatic length compensation Sensor at the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping devices Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed vise opens on both sides End piece length 100 mm Modern, freely programmable CNC control for multiple sawing jobs with various cutting lengths and quantities. Automatic feed unit 500 mm with ball screw incremental feed and automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire work process with simple data entry

Durum: yeni, Baskı kuvveti 26,0 kN Strok 60 mm Kol açıklığı 110 mm Çalışma yüksekliği 70 - 250 mm arası Tabla ölçüleri 190 x 140 mm Mil çapı 30 mm Makine ağırlığı yaklaşık 46 kg Lrodpfxsfv Avro Adceu Boyutlar (U x G x Y) 310 x 140 x 475 mm Diz eklem kolu ile çalışan el presleri – KAMPANYA FİYATI!!! HK 2600 strok 60 mm, eğik dişli mekanizması ve yan kol sayesinde çalışma yüksekliği hassas ve kolayca ayarlanabilir. Gövde yüksekliği 475 mm Üretimde ekstra güç harcamadan daha fazla baskı. Diz eklem teknolojisi ile strok sonuna yakın maksimum baskı gücü. Mil kafası ve gövdenin özellikle sağlam yapısı.

Durum: yeni, Baskı 2,5 kN Strok 45 mm Çıkıntı 90 mm Çalışma yüksekliği 80 - 220 mm arası Tabla ölçüsü 120 x 60 mm Makine ağırlığı yaklaşık 22 kg Boyutlar (U x G x Y) 160 x 230 x 390 mm Dişli kremayerli el presi HZ 250 Kuvvet aktarımı dişli kremayer mekanizması ile sağlanır. Çalışma esnasında sabit bir baskı gerektiğinde kullanılır. Hassas imalat, mil sertleştirilmiş ve taşlanmış, sınırsız ömür Uzun mil kılavuzu, optimum baskı gücü, DIN 650 standardına uygun merkezi kanallı, kanal taşları tam uyumlu. Ledpfx Aofv Av Isdcoru

Durum: ikinci el, Üretim yılı: 1973, makine/araç numarası: 6938, giriş voltajı: 380 V, giriş frekansı: 50 Hz, taşlama bandı uzunluğu: 7.100 mm, 1973 model bu kullanılmış Schmid KM uzun bantlı zımpara makinesini satışa sunuyoruz. Tip: KM Lsdpfxez Afbis Adceru Makine numarası: 6938 Yapım yılı: 1973 Çalışma gerilimi: 380 V Frekans: 50 Hz Zımpara bandı uzunluğu: 7.100 mm Makineyi 1.600 Euro net fiyatla sunuyoruz. Herhangi bir sorunuz varsa veya daha fazla bilgiye ihtiyacınız olursa, lütfen bize mesaj gönderin veya bizi arayın.

Durum: yeni, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw band length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 18 – 110 m/min Total power requirement 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double miter metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Miter cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox for very quiet, low-vibration cutting • Hydraulically operated, laterally adjustable vise • Guided, high-quality industrial bearings • Heavy-duty vise and cast machine base • Large machine bed • Machine pedestal with tool compartment and chip drawer Lrsdpfx Asfgyh Ujdcsu • Cutting monitoring via ammeter • Adjustable feed pressure regulator • Support roller (material entry side) • Ball bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material or direct cutting for serial workpieces 4. Saw band stops 5. Raise frame until just above material 6. Open vise

Durum: yeni, Cutting range at 90°: round 680 mm Ledpfx Adefg E Hnscsru Cutting range at 90°: square 640 mm Cutting range at 90°: rectangular 1250 x 600 mm Cutting range at 45°: round 680 mm Cutting range at 45°: square 600 mm Cutting range at 45°: flat 870 x 600 mm Cutting range at 60°: round 580/550 mm Cutting range at 60°: square 530/450 mm Cutting range at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total connected load 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column dual-miter band saw for fast cutting with pusher system P15 (optionally P30) Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Highest positioning accuracy is achieved by the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, coupled with a reliable hydraulic brake via large-radial center positioning. The work table is supported by high-quality preloaded bearings to ensure exceptionally smooth rotation. CNC control A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and angles. Dual-sided gripping positioning system The B&S pusher system, feeding and positioning system, is equipped with “dual-sided opening gripping tongs” that are hydraulically operated. This ensures secure gripping and transport of materials and bundles, even those slightly deviating from the ideal shape. The pusher system is mounted separately and guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust geared motor.

Durum: yeni, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Lodpofg E Hmofx Adcoru Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column twin mitre band saw for fast cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved through the new “B&S positioning system”. An intelligent NC control ensures smooth coordination between linear encoder and self-braking positioning motor, in combination with a reliable hydraulic brake and large-radius central positioning. The work table is mounted using high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control A CNC system allows programming of up to 90 cutting programs with different cut lengths, batch quantities, and mitre angles. Dual-sided clamping positioning system The B&S pusher system, feed and positioning unit, is equipped with “dual-sided hydraulic clamping grippers”. This ensures secure handling and transportation of materials and bundles, even if they deviate slightly from the ideal form. The pusher system is a separate construction, guided by ball-bearing linear rails, precision ground rack, and a frequency-driven, heavy-duty geared motor.

Durum: yeni, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw blade length: 4250 x 34 x 1.1 mm Blade speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cuts left and right up to 60° without machine conversion · 34 mm saw blade width · Large, ball-bearing mounted rotary material support table · Saw blade guides positioned via extra-wide linear guideway · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed rollers · Removable chip tray (for cleaning/disinfection) · Freestanding, safe, and ergonomic control panel · Storage for blades and consumables · Cutting pressure regulator, feed rate controller · Fully hydraulic vise · Quick clamping (front loading) · Material height sensor (automatic cut start recognition) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material edge or direct cutting for serial cuts 4. Switch off saw blade Ljdofgyicopfx Adceru 5. Raise frame just above material 6. Open vise Optimal, material-independent cutting results via fine adjustment of the saw frame using: * Pressure control valve (cutting pressure/power) * Feed rate control valve (speed) * Clearly labeled switch with pictogram, easy and intuitive operation

Durum: yeni, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangle 820 x 610 mm Saw blade length 5850 x 41 x 1.3 mm Blade speed 15 – 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.45 t Space requirements approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping takes place vertically on both the infeed and outfeed sides. From the K-tech 800 H model onward, the machine is equipped as standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. Lredpfxefgyifj Adceu The machines come standard with the environmentally friendly “B&S Clean Cut cutting system” with minimum quantity lubrication, reducing cleaning effort and conserving resources. CNC control A CNC controller allows for the programming of up to 90 cutting programs with different cut lengths, quantities, and miters. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” that are hydraulically operated. This ensures safe gripping and handling of materials and bundles that may deviate slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, a ground rack, and a frequency-driven, robust gear motor.